Eastonmade; What's The Problem With The 40C Firewood Processor?

Рет қаралды 13,425

Күн бұрын

Thanks for all the feedback and support folks. It's very much appreciated. It's great that we are building such a strong community around our products where everyone can share their ideas and thoughts. Hit the like and SUBSCRIBE button if you haven't done so yet and I'll keep you in tune with what's going on in the firewood industry. Hope to see you all on the next one!!!
Give us a call for more information!!!
613-812-3213 Log Splitter Sales/Service
Check out these awesome KZfaq Channels!!!
Like our videos? Check these guys out!!!! If I missed you and you want your channel on the list drop a comment below and I'll add it on the next video.
Eastonmade Ultra
Glenn @oldschoolmillenial / oldschoolmillennial
Chris @inthewoodyard / inthewoodyard
Joe @joesfirewoodvideos / joesfirewoodvideosii
justin @lifesapprentice / @lifes_apprentice
Eastonmade Axis
Buckin billy @buckinbillyray / buckinbillyraysmith
Joe @ohiowoodburner / @ohiowoodburner
Adam @hometownacres / hometownacres
mike @KNLfirewood / @knlfirewood
Gord @gpoutdoors / gpoutdoors
Dan @armsfamilyhomestead / @armsfamilyhomestead
Brittany and Francis @BandFFirewood / @bfoutdooradventures
Neil @neilkochdigdriveDIY / @digdrivediy
Eastonmade 5-11
Gord @GPoutdoors / gpoutdoors
Eastonmade 9-16
Ben @survivingcountrylife / @survivingcountrylife7069
Paul @williamsonridgeoutdoors / williamsonridgeoutdoors
Eastonmade 12-22
Harry @thedriftlesshomestead / thedriftlesshomestead
Chuck and Deb @ironandoaksawmill / ironoaksawmill
Brade @savagefirewood / @savagefirewood
Reuben @earthandbloom / @earthandbloom
Todd @struckacordfirewood / @toddpac1
Eastonmade 22-28
Gord @GPoutdoors / gpoutdoors
Doug @offgridwithdougandstacy kzfaq.info?searc...
Eastonmade 22MB
Chris @inthewoodyard / inthewoodyard
Eastonmade 48C
Kevin @skidderkev / skidderkev
HTTPS://www.eastonmadewoodsplitters.com
#Logsplitter #firewood #logging #treecare #arborist #chainsaw #sawmill #forestry #homesteading #offgrid #heavyequipment #firewoodprocessor #logger

Пікірлер: 150

@tombartlett7448 8 ай бұрын

I would like to see GP outdoors or Outdoors with the Morgans.

@mjmtreeservicemaintenance2940 8 ай бұрын

Andrew I'm begging you to go with CAT. They are beyond a top tier engine and the support and service from CAT is amazing.

@davidedwards3734 8 ай бұрын

Glad you are seeing what to make an awesome processor work!! I dont have a KZfaq channel, so it won't be me!!!!🤣🤣🤣🤣🤣🤣 Im guessing In the Woodyard with Chris!!! Stay Hydrated and Have a Safe Day

@rogerl8488 8 ай бұрын

Outdoor with the Morgans he making a clearing for it lol

@thejpnjn 8 ай бұрын

I’m willing to bet outdoors with the Morgan’s will be getting one of these Andrew!

@InTheWoodyard 7 ай бұрын

Good news, I like the improvements.

@savagefirewood 8 ай бұрын

Eastonmade #1 cheers 🍻 absolutely no doubt the best firewood splitters and processors hands down. Cummins ! 😆

@smorefirewood 8 ай бұрын

At the Paul Bunyan I saw it saw. But the recovery time between cuts was lacking a bit. It just took too long to stand back up and cut. 65-70 hp for a blade that size is what I was told by people who know more than me. #1 Perkins/Cat #2 Deutz #3 hatz

@EastonmadeWoodSplitters 8 ай бұрын

Saws working really good now dana. Appreciate the feedback

@smorefirewood 8 ай бұрын

@@EastonmadeWoodSplitters I’m sure you got it tuned

@brandonthefinanceguy978 8 ай бұрын

Has to be with Chris and the boys at In The Woodyard!

@skeets6060 8 ай бұрын

More bigger is more better !

@ChrisLascari 8 ай бұрын

Thumbs-up number 560. Skidder Kev is my guess. Power that baby up!

@scottdennison8408 8 ай бұрын

Hey Andrew, my guess is Outdoors with the Morgan’s, Mike keeps talking about building his firewood business and always speaks very highly of Eastonmade

@foxlake6750 8 ай бұрын

Not a fan of the Morgans, the show feels like one big advertisement and Mike works it. Good for him, but I got out of watching it.

@BertsCustomCuts 8 ай бұрын

Cant wait to see it run when all the changes are done. Its gonna be a beast.

@WestwayFirewood1313 8 ай бұрын

Andrew, CAT would be the best choice in our area. I know it may be a bit more costly, but if you don't have a dealer/service department in your area for your equipment, the money someone would save by going with a different, cheaper motor wouldn't be any savings at all. There are no Hatz or Deutz in my area, I don't know if there are any in my state. As you already know, accessibility and support are of major importance in making a decision when purchasing equipment. Can't wait to see the finished product!

@lindyaustin2095 8 ай бұрын

Outdoors with the Morgans

@Andrew_From_NB 8 ай бұрын

Awesome update Andrew! Looking forward to seeing what you an the team come up with! Andrew from NB :)

@KCBarr1 8 ай бұрын

There is no replacement for displacement. Pour the HP to it. We had a Deutz powering our sawmill (5 cyl) and it was basically bullet proof.

@ericcrockett6396 8 ай бұрын

What engine I'd like to see would be a Detroit 4-53T, but I know that's not really practical to put 50 year old engines on new equipment lol. But seriously from a service and parts stand point I would say kubota, cat, cummins, or John deere. Dealers for those 4 are quite common and parts are easy to source

@cherylshannon-vp7uc 8 ай бұрын

Cat would be a great choice but you still have to look at costs for an engine and repairs. Kholer if they made one that had the horses you need to run this beast but reliability would not be a question with Kholer.

@765Guys 8 ай бұрын

Lookin good Andrew! I work at a cat dealer. Dealer network, field service and parts are tough to beat.

@timstout781 8 ай бұрын

Hoping it's Mountain top Outdoors. Very deserving. Everything there is Orange and Blue.

@ForestHogOutdoors 7 ай бұрын

Would love to see the CAT motor go into this unit. Willing to bet this shows up In The Woodyard in the next week or two. Awesome

@killinskindlingfirewood1851 8 ай бұрын

A really good friend of yours. Would that be Gord at GP Outdoors, or Kev at SkidderKev? I’m glad you changed out the belt for a chain.

@bwillan 8 ай бұрын

distinct possibilities as they are reasonably local to Eastonmade HQ.

@LLAND18 8 ай бұрын

Just discovered this channel and Eastonmade. Living in Alaska I really like the cab on the 48C with a heater would be great to be able to run for most of the year.

@EastonmadeWoodSplitters 8 ай бұрын

The 48c is a nice machine. Thanks for checking us out

@toddpacheco4748 8 ай бұрын

Excellent video Andrew you’re making something for the guys that do firewood for a living that’s affordable to them 😮😊❤

@HometownAcres 8 ай бұрын

My guess is GP Outdoors

@BacktoBob1 8 ай бұрын

Andrew that machine is going to do well for you. The slope in the infeed may not seem like a big deal to some, but it really is indeed quite helpful!

@kevinholbrook7174 4 ай бұрын

That is a very close what I am looking. Very nice work Andrew and well done! Here is my Ideas for this particular project. #1: I want a folding conveyor. But, it would fold back onto itself in the shape of a “L”. but I also need it smaller in width and about 2-3” deeper. The chain is like the one on your Axis except with double chain. #2: I would like a captain’s cabin on the left side. #3: Have you ever thought about using a Cummins 4bt engine with 105-HP? And let’s not forget about adding a “TOOLBOX”!!! lol #4: Ad a side shoot for the scrap chunks. Andrew, I believe that sums it up nicely. I hope that these changes will be considered in production. Thanks 🙏 for coming out with this model. P.S. You can name it: 40cs (S) Special. I hope you like my inputs and suggestions. I almost forgot about the chain on the conveyor. I want to use the same one that is on the load deck. And have a bolt-on plate type for the sawdust shoot.

@GPOutdoors 8 ай бұрын

Some great improvements Andrew. Pretty exciting for the business and for customers. Looking forward to seeing it in action! Cheers!

@55turftech 8 ай бұрын

hey Andrew, as far as an higher horse power engine goes I would suggest having a look at the Kohler line of diesel engines. they are pretty solid and lots of dealer representation across North America. Ray

@nashlindner3146 8 ай бұрын

Throw a CAT engine in it. One thing I've learned working in maintenance in a large factory is that things will always break when you don't want them to. The key is to either have parts on hand or find local companies to get parts you don't have. The ability to have a short turn around on parts or even having a dealer do the work, its worth paying a little extra.

@jeremyjames1280 8 ай бұрын

Get a winch mounted on an arm and the end of the feed chain and a fold down loading ramp. Some of us have limited space and availability to bring additional support equipment to feed it. Perhaps even a bolt on log lift as well.

@pauldixon3089 8 ай бұрын

When you decide on what hp rating to go for, I'd check out what the torque output for each engine is compared to what is currently on the machine. Running those pumps will require a lot of torque when under full load. Better to be ahead than overloading a small unit I'd say.

@bwillan 8 ай бұрын

Which ever engine maker you pick, I think parts and service availability should be a key consideration. As to where it will pop up first on youtube, I think Chris at In The Woodyard would be the ideal candidate for this processor. The size and length of logs he buys would would suit this processor well.

@sirwallygator565 8 ай бұрын

You should send it to a place where the guy would buy one. Don't send it to a place he would never buy one because of cost. That is bad advertising

@bwillan 8 ай бұрын

@@sirwallygator565 Remember Eastonmade is using social media (youtube, facebook, etc) as part of their marketing budget. So it stands to reason to send it to firewood channels that have a decent following and also produce videos regularly. In other words, to get as many eyeballs on their equipment as possible.

@carnesdiy 8 ай бұрын

Mountain Top Outdoors, is my guess. Patti would love it.

@BobbySixguns 8 ай бұрын

Looking forward to seeing run with the changes. It was pretty awesome to see it run at Paul Bunyan. All those engine engines are pretty solid choices. I'd say Cat, just based on support. I know in my area Hatz and Deutz support are few and far between.

@hardworkingmanoutdoors 8 ай бұрын

I can’t give you any advice on what engine to go with but I’m sure you guys will figure out what fits best. Love the constant modifications and improvements. Can’t wait to see the final product. The test run at the Paul Bunyan show was pretty impressive. I’m sure the tweaks will really have it running smooth and Rachel proof lol.

@MeMyselfAndTouYube 8 ай бұрын

I'm not sure about the new Deutz engines but the older ones are pretty solid. We've never had troubles with them in our older tractors.

@michaeljheinz3336 8 ай бұрын

Thanks for the great update Andrew.

@robertmurray632 7 ай бұрын

Hatz silent 🤫 pack engine would be fantastic Andrew 👍

@johnnieset9518 8 ай бұрын

I saw it at Bunyan, looked like it needed a few tweeks. I'm sure when its ready, it will be a beast like the rest of the Eastonmade line.

@olddawgdreaming5715 8 ай бұрын

Thanks for sharing Andrew, get it all together and get it on the road> Stay safe , Fred.

@BevanMoffatt 8 ай бұрын

Can't go wrong with cat. Everything is either on the shelf or in the next day 👍

@treemanclint2883 8 ай бұрын

Don't forget Yanmar. Totally bullet proof. Kubota is right up there to. I have a 5 cylinder Deutz, only one I've ever owned, massive amount of power. John Deere powers a lot of equipment they don't build in the forest industry.

@aaronmilburn4962 8 ай бұрын

Can’t wait to see who gets it!

@cliffd.4646 8 ай бұрын

I already know where it is going just waiting to and excited to see it show up

@csoliday07 8 ай бұрын

It’s going to In the woodyard to replace his processor!!

@kahvac 8 ай бұрын

More Power !

@michaeld.3378 8 ай бұрын

Jeff and patti or Chris in the woodyard. Love your products.

@johnnyhomegrownholmgren9999 8 ай бұрын

Hi! I problaby would choose the Deutz engine. They have always been reliable, and quite easy to find parts for. 👍

@glennmaynard7233 8 ай бұрын

Hoping it's going to Rachel and Heath at Hard Working Man ! No matter where it goes It'll be a stretch for anyone to produce as much firewood as Chris over In The Woodyard.

@1squirreldog 8 ай бұрын

I’m sure you will figure it all out & put out a quality product .

@bradleyvanspriel6258 8 ай бұрын

I think this might be at my house in a week or two

@PineInTheAshMilling 8 ай бұрын

Andrew i'll demo it. How about yanmar engine.

@nickjcyr 7 ай бұрын

I’d pay a little extra to see a cat engine on there but that’s just me. Fairly easy to get parts for long term thinking

@markMac407 8 ай бұрын

Eastonmade with a CAT!?!? That's 2 out of 3 pieces to a wet dream!!! Not sure where it's going but they'll be extremely Happy when ot gets there!!!!!

@Lens-KeepingBusy 8 ай бұрын

Hi got a question, Homestead Jay did a video of extending his splitter knife higher, will this bend the ram, more force is now at the top , love your comment 🙏🇨🇦, good video to 🚀🪵🚜🏰👍

@EastonmadeWoodSplitters 8 ай бұрын

It will put a lot more leverage on it for sure

@toddsoutsideagain 8 ай бұрын

Chris @In The Woodyard! I watched you run it at Bunyan! Awesome machine just out of my league. 👍🏻👍🏻

@BertsCustomCuts 8 ай бұрын

Gavin got to run it at the show.

@toddsoutsideagain 8 ай бұрын

@@BertsCustomCuts He Will get to run it a whole lot more soon🤣🤷‍♂️

@lendane8517 8 ай бұрын

In The Woodyard? Is Chris finally getting a processor for his brother Ken?

@AliceistheGoon 7 ай бұрын

I’m curious, but have you considered a PTO driven processor? Thanks great videos.

@randyschneider6086 8 ай бұрын

You need some gravel in that yard,French drains under the wood pile so wood not sitting in mud.

@jamesbainton 8 ай бұрын

In the Words of Tim Taylor: More Horsepower!!!

@EastonmadeWoodSplitters 8 ай бұрын

Ugghhh ughhh ughhh lol

@chriscarlson3563 8 ай бұрын

What happened to the rubber in feed??? I see this one has chain, said in the first video the rubber freezes down slips when wet. Glad to see it's a chain now

@KNLFirewood 8 ай бұрын

I’m going to guess In The Woodyard or GP. Leaning towards GP….we’ll see!

@aldredske6197 8 ай бұрын

Hi Andrew!!😀😀 Was hoping to see it in Appleton Wisconsin. But the way it sounds it won't be ready in a couple weeks to come over here. I'm guessing that it will be at GP outdoors. A Deutz engine would be a good engine for on it. They make great stuff!! Take care my friend!!😀😀💚 Logger Al

@hardworkingmanoutdoors 8 ай бұрын

For channel guess I’ll throw out Earth and Bloom maybe a test run for his fundraiser?

@lonnieandrhondawatkins321 8 ай бұрын

Giggety I wanna see it in action

@fralin1966 8 ай бұрын

As always making the best better !

@EastonmadeWoodSplitters 8 ай бұрын

Hey theres tim!!! Im heading to the camp all next week.

@fralin1966 8 ай бұрын

say hello to the boys hope you get a slammer@@EastonmadeWoodSplitters

@Z-Bart 8 ай бұрын

I do know it WILL be tried and tested before going to the masses. Looking good Andrew. The machine, not you. LOL!!!!

@earthandbloom 8 ай бұрын

Ill be keeping an eye on Skidder Kevs channel

@fricknjeep 8 ай бұрын

hi there good looking proooser john

@BGWenterprises 4 ай бұрын

Just throwing a dart at the wall.. In terms of hp. Mabe a standard and high output version. Mabe one at 50hp~ and one at the 74 line in the sand point.

@EastonmadeWoodSplitters 4 ай бұрын

Not a bad idea at all. Unfortunately there really isnt a huge cost difference between the 50 and 74hp engines. We did a bunch of testing last week with the 74hp deutz and the machine is incredibly productive and easy to use

@BGWenterprises 4 ай бұрын

@EastonmadeWoodSplitters Other than the cost difference. The only argument I can come up with is, fuel consumption per amount of run time. Anyway I'm just west coast r and d Talking out loud. LOL

@WoodysRTBFirewood 8 ай бұрын

Hello Andrew Well, if this machine still requires some modifications, my guess is it’s not going far or across the border so the next logical place would be GP outdoors because he does not have a processor whereas Skidder Kev already does Cheers Woody !!!

@donaldslate4195 8 ай бұрын

Outdoors in the 608.

@atskooc 8 ай бұрын

Back 40 mentioned one of these on the Wood Hounds podcast this week. Is it this one?

@kenarenforest 8 ай бұрын

please, please, please use the yanmar engine... they are by far the best diesel engine on the market!!! ... and, I wish you would return using the Honda on your firewood splitters. (Vanguard engine on the Ultra needed a warrantee repair immediately; one on the 12-22 is working just fine) I might consider buying a processor in the future, perhaps

@Berensmetalworks 8 ай бұрын

Outdoors with the Morgan's

@cah_sawmill 8 ай бұрын

I'm here friend

@jandblawncare8570 8 ай бұрын

My vote goes to CAT....dealers everywhere with stocked shelves.

@billwestphal1421 8 ай бұрын

I'm guessing fire wood at the furnace will be demoing it soon.

@GregPrince-io1cb 8 ай бұрын

Can't beat a Kubota or Yanmar.... keep the Diesel Extortion Fluid off of it!!!

@kennethrobinson5151 8 ай бұрын

My guess is Allen family Firewood

@waynetharp 8 ай бұрын

I thought one of the goals was being able to tow with a 1 ton truck? Will all the new add ons push the already heavy unit above the 1 ton towing capability?

@EastonmadeWoodSplitters 8 ай бұрын

I pulled it a couple of hours up to gords and back with my 2500 and it worked great

@waynetharp 8 ай бұрын

@@EastonmadeWoodSplitters Awesome...Just felt it was slowly getting heavier with each improvement and now adding a bigger engine and pump as well! Sure will be alot more versile if it can be pulled with a heavy 3/4 ton PU! Thanks for responding!

@mountaintopoutdoors 8 ай бұрын

Maybe Mountain Top Outdoors. Lol.

@mikehughes2026 8 ай бұрын

Employee Discount!!🇺🇸🇨🇦

@KampsKorner 8 ай бұрын

Does Kubota have anything in that horse power range??

@travisdoesfirewood 8 ай бұрын

Drop it off in my yard;) I'll work the sh!t out of it!!!!!😊

@sirwallygator565 8 ай бұрын

Make the processor smaller.. There is a reason people like me buy the European processors. It's because we are always takeng it to very narrow tight spots and your machine is just to big.. Try making a European style but make it Easton made... You bump that HP up and up the pumps you may as well just call it a big machine... Here is a reason why commercial guys buy the European ones and it's not cost

@kknows3512 8 ай бұрын

Cat all day, all the way!

@kentcorbett5436 8 ай бұрын

It's hard to guess when you say one of your good friends. You have so many so my guess would be. I don't think you're going to trade it with. Princess in the world Jared but I can see it going to mountain top about doors or outside with the Morgan. On a trial basis as Mike is looking to double his firewood for next year. And I think a processor is the way to do that. Or because it's just testing. And you wanna work out the kinks? And put it through its paces. It could be skidder Kev😂❤😅

@keithmueller2857 8 ай бұрын

No mention of Commins? Patty is going to love that prahcessor!

@EastonmadeWoodSplitters 8 ай бұрын

Hard to get cummins in a smaller platform

@ericcrockett6396 8 ай бұрын

@EastonmadeWoodSplitters what about the little 2.8 or 3.3

@carllewis8203 8 ай бұрын

Can it do a cord of would under 40 minuted

@EastonmadeWoodSplitters 8 ай бұрын

A full cord every 20 minutes or so

@CodyH88 8 ай бұрын

Out of curiosity, when will the electric splitters be on your website? I made a fool out myself not recalling I watched the Axis video (with a tribute to a man who passed away) and didn't even know because I missed the video on the electric Ultra until I went through old content. I was confused because I went to thebsite and they weren't on there so I figured they didn't exist. This processor looks awesome btw, especially if it too one day becomes available with electric.

@EastonmadeWoodSplitters 8 ай бұрын

We really dont do that many of them but can build them

@CodyH88 8 ай бұрын

@@EastonmadeWoodSplitters okay I was just wondering since I didn't see anything at the website. I'll keep that in mind, Andrew because if I get off the ground I wanna go electric, personally.

@Redneckmfg 8 ай бұрын

What kind of Lead time on this unit ?

@EastonmadeWoodSplitters 8 ай бұрын

3-4 months and after that be 4-6 weeks I suspect

@thomasworatschka9657 8 ай бұрын

Andrew's front yard

@lorenpierce8968 8 ай бұрын

Cat has a big dealer network but sometimes takes quite a while to get parts.We are in the logging business and have a cat yard crane and the engine blew and it took over 6 weeks to get a new engine.That is not good at all.I would not recommend cat.