Eastwood’s Rust Encapsulator, Ultimate Test: 2 years Later!

Рет қаралды 49,032

Күн бұрын

Two years ago I do a brief tutorial on how to spray Eastwood’s Rust Encapsulator, then give it the ultimate test! I had forgot all about the test and toolbox until I was mowing the other day and noticed the toolbox had been sitting outside, neglected for the last two years. While reviewing, I also show the Raptor liner that I sprayed on the side of the shop. ‪@fullthrottlekindaguy‬ here it is!
To see my original video:
• Eastwood's Rust Encaps...
Here’s Raptor liner over Rust Encapsulator:
• Raptor Liner over Rust...
Justmoparjoe shirts and more: www.etsy.com/search?q=Justmop...

Пікірлер: 112

@musclecarmitch908 2 жыл бұрын

Cool to see how well products stand up to time and weather! Thanks for sharing!👍

@JustMoparJoe 2 жыл бұрын

Thanks for watching, Mitch!

@BigMikesHooptyBarn 2 жыл бұрын

That's cool Joe. I haven't been with you for 2 years and I haven't been through all of your older content so that is cool to see. And I'd say that is about as fair as possible for a durability test with those products.

@JustMoparJoe 2 жыл бұрын

Thanks Big Mike. I actually wore my camera on my head. It looked like a first person shooter video game. 🤣

@maxwedgedickdasterdly5586 2 жыл бұрын

I'm impressed with Eastwood products. I used Eastwood header paint and the coating for inside the headers. It looks as good as it did a year ago. This is the first time painting headers worked for me. And didn't Just burn off . It cost me about $75 for everything.

@JustMoparJoe 2 жыл бұрын

I’ll definitely check that out! Thanks buddy

@tb40ford 6 ай бұрын

I’ve used Eastwood products for 30 or 40 years, but I still don’t agree with covering up rust will lead to problems down the road Just my opinion, and as I said, I love Eastwood spend a lot of time with those folks at Hershey

@josephpuchel6497 11 ай бұрын

EastWood rust encapsulator performs very well. Used it on a 89 K5 Blazer. Still rust free. There’s a half dollar size spot of green rust encapsulator on my parents driveway. It’s still there hasn’t worn away after 15 years. It’s been beaten down by heat of asphalt, rain , ice and snow and still there. This in it self tells you something about the product’s performance.

@JustMoparJoe 11 ай бұрын

That’s impressive! Thanks for sharing

@big3fan916 2 жыл бұрын

Keep um coming Joe , another good video !

@JustMoparJoe 2 жыл бұрын

Thanks brother. Next one will be a longggg one

@edsmachine93 2 жыл бұрын

Very nice test. And someone said to the tool box. "Well, we're just not going to let you slide on out of here, now are we"! HEHE I can't wait to try the Rust incapsulator for myself.. Thanks Joe.

@JustMoparJoe 2 жыл бұрын

😂 nice one Ed

@desertmopars3336 2 жыл бұрын

The Eastwood encapsulator seems decent. I have heard nothing but good things about Raptor Liner, and it looks as though they may be true. We appreciate you sharing buddy, thanks...

@JustMoparJoe 2 жыл бұрын

Thanks brother

@Mynextproject_74 2 жыл бұрын

Great video Joe!

@JustMoparJoe 2 жыл бұрын

Thanks buddy! It was a quick one. The labor will all be in the next one 🥵

@chrisprice4420 2 жыл бұрын

Yup Eastwood has some great products out there. Looking forward to the video on the Coronet.

@JustMoparJoe 2 жыл бұрын

Thanks Chris! I’m editing now. I had over an hours worth of footage, from over 10 hours work. Trying to compress it.

@donaldhalls2189 2 жыл бұрын

That rock liner seems pretty dang good, all the best to you and your loved ones

@JustMoparJoe 2 жыл бұрын

Thanks Donald!

@Mopardude 2 жыл бұрын

Thanks for sharing that. I guess I could come back and see you do the car.

@JustMoparJoe 2 жыл бұрын

Haha! Thanks for the support

@LoBelly 4 ай бұрын

very helpful - thanks

@taylormademusclecars 2 жыл бұрын

Cool stuff!! Good to know!

@JustMoparJoe 2 жыл бұрын

Definitely a fun test 😂

@tipper87 2 ай бұрын

Great video. Thank you.

@JustMoparJoe 2 ай бұрын

Glad you liked it!

@bertgrau3934 2 жыл бұрын

That bed liner stuff is pretty good. I seen a guy that had an International 9400 I that had a Cummins ISX 15 Liter engine. The from cover was leaking oil pretty bad. He washed it off, used grease remover then sprayed the bed liner all around where it was leaking oil, and presto it stopped the oil leak. He later replaced the front cover because it holds the gear drive for the cam shafts. You don't want those to get out of time.

@JustMoparJoe 2 жыл бұрын

Man that’s a fix! Definitely a new one on me.

@robsdeviceunknown 2 жыл бұрын

I raptor coated my whole truck in Forest green. Love it. I did that because I got tired of worrying about scratching my truck as I use it... as a TRUCK!. And, if I scratch it or have to do a repair, just takes 20 minutes and reshoot it. No sanding prep work etc.

@JustMoparJoe 2 жыл бұрын

Man that’s an idea! I bet it looks slick, and can double as a good deer stand!

@josephshelman540 2 жыл бұрын

Mr B's Mustang. Also Chris has done a beautiful job of finishing that Mustang.

@JustMoparJoe 2 жыл бұрын

Yes sir! Glad it’s done up!

@moparnut6286 2 жыл бұрын

Yeah I like the Eastwood rust encapsulator and the internal frame coating...and I like to top coat them with valugaurd undercoating that's the brand look them up Joe Very good stuff. You can also buy the ceramic beads separate on line and turn any paint into a heat insulating coating. Lizard skin is another good product I've used with great success... It's a shame you had too remove your shoot the tool box video it was great!

@JustMoparJoe 2 жыл бұрын

Thanks John. Yea I didn’t want to not get monetized over it. I removed it in studio. I wonder if it’s still hidden up there somewhere

@DuddiesAdventure 2 жыл бұрын

That is a pretty cool update, That stuff held up great considering it got hit with a a junk iron projectile device!

@JustMoparJoe 2 жыл бұрын

😂 I guess I can try the .50 cal next time 🤷🏻‍♂️

@weezereli1996 Ай бұрын

Gunna use this in place where the vinyl top was on my car.

@JustMoparJoe Ай бұрын

That’ll be cool. I would buy the better version with if it’s in direct sun all the time

@THEMOFODRIVER. 2 жыл бұрын

that stuff works great. I've used it on my Dart

@JustMoparJoe 2 жыл бұрын

Awesome! Thanks for sharing!

@gregtough9055 2 жыл бұрын

That looks like decent stuff in my eyes. Here in the great white north the cars are inside for 6 to 7 months and that would stand up fine

@JustMoparJoe 2 жыл бұрын

That would make a big difference. We are closer to hel.. I mean the equator 🔥

@A_Different_Kind_Of_Truth 2 ай бұрын

Clint Eastwood drinks this for longevity 👍👍

@JustMoparJoe 2 ай бұрын

Did I fire 5 shots or 6? 😂

@A_Different_Kind_Of_Truth 2 ай бұрын

"Well.. in all the excitement I can't really remember myself.. but.. you should ask yourself this question.. does it remove rust.. Well does it.. punk ??" 😂😂😂

@A_Different_Kind_Of_Truth 2 ай бұрын

BTW.. GREAT VIDEO AND EXPLANATION.. VERY PRECISE AND CLEAR 👍👍

@JustMoparJoe 2 ай бұрын

@@A_Different_Kind_Of_Truth you got it going on! Thanks for the support. Long live Eastwood

@wr1411 7 ай бұрын

nice seeing real world testing. I think if you had let the undercoating dry then top coated that so it had more uv protection it would have been even better. thanks for the entertainment.

@JustMoparJoe 7 ай бұрын

Great suggestion!

@JonnyMopar 2 жыл бұрын

Pretty cool. Better protection than the factory had.

@JustMoparJoe 2 жыл бұрын

Thanks Jonny. I really think painting a car with it would be nice. Then prime it and paint when you’re tired of satin black

@faris9327 Жыл бұрын

thanks for the video, whats the difference between rust reformer and rust encapsulator?

@JustMoparJoe Жыл бұрын

I think reformer has an acid that turns the rust.

@johnelliott7375 2 жыл бұрын

Looks like you have the best results.

@JustMoparJoe 2 жыл бұрын

Thanks John! It’s a hot one here

@johnelliott7375 2 жыл бұрын

@@JustMoparJoe I bet it is going to be a warmer day their tomorrow. If was 92 here today and warmer tomorrow.

@jimmyford271 2 жыл бұрын

It looks like the rust converter kept the metal from rusting around the pellet marks. The rust encapsulator is ment to be top coated I believe.

@JustMoparJoe 2 жыл бұрын

It says you can top coat it, but it’s not necessary. I thought about shooting a car with it. If I get tired of it being matte black, then just scuff it up, prime, and shoot it.

@jimmyford271 2 жыл бұрын

@@JustMoparJoe I sprayed chassis black over it on my Dakota.

@keithcalitri840 2 жыл бұрын

The coronet is looking good bud.

@JustMoparJoe 2 жыл бұрын

Thanks Keith! Lots of work left

@ssudzy3 Жыл бұрын

How much did you dilute the rust encapsulator to spray it?

@JustMoparJoe Жыл бұрын

Not at all. It’s very thin. Shot with a 1.4 tip

@cjm5002 2 жыл бұрын

So when I had spoken to you about how bad my pickup bed was, think that tool box from 2 years ago. Ive been tossing around a few ideas of what to do with it for years now but I think you just sold me finally on doing that encapsulator. I dont suppose you have used any of the rustoleum bed coating 'in a rattle can' with it? I really like the reliability and texture of the rustoleum but the prep on it has to be perfect bare metal in order to bond well. Any rust and its botched. Ive had it on a railing that is used daily for 6 years with zero flaking or fade.

@JustMoparJoe 2 жыл бұрын

I’m sorry I haven’t. I think I used herculiner on a car frame before and it stayed. I like the raptor kits.

@cjm5002 2 жыл бұрын

@@JustMoparJoe Yeah I will hafta buy a spray can of it and use it on the tailgate

@kevincampbell8298 2 жыл бұрын

Any of the encaps I have looked at said to paint over them.

@JustMoparJoe 2 жыл бұрын

Thanks Kevin. Check out my next video of applying the Encapsulator on the coronet.

@clintwoods2937 2 жыл бұрын

Nice

@JustMoparJoe 2 жыл бұрын

Thanks Clint. Should have the coating video up tomorrow. I’ve got many hours in under the car now 🥵

@johnelliott7375 2 жыл бұрын

Hopefully you are having a good day today. TTYL

@JustMoparJoe 2 жыл бұрын

Thanks John. Stay safe. Don’t get too hot 🥵

@johnelliott7375 2 жыл бұрын

@@JustMoparJoe same to you buddy I see you are dripping wet like me today water is King today.

@tb40ford 6 ай бұрын

Thank you so much. I just don’t understand why encapsulate rust why not remove all rust? I’ve done so many. Cars and always blasted to clean metal then epoxy primer I’m sure I’m missing something. Travis in Ky

@JustMoparJoe 6 ай бұрын

Thanks for checking out the video. Blasting definitely has its advantages and drawbacks. It’s not practical for most simple shop owners and diy people (which make up the bulk of hotrodders). A high volume air compressor, adequate space, proper ventilation, protective equipment, etc. Here’s a product that gets similar results with much less effort and expensive. I actually like to encapsulate areas and then sand and epoxy prime later. I agree it’s best to remove all rust, but sometimes it’s just not possible with everyone’s ability’s or budget.

@tb40ford 6 ай бұрын

@@JustMoparJoe you’re very welcome I’m gonna subscribe to your channel If I can’t remove rust, I’m not gonna cover it up. I said I was probably in the wrong here. Thank you for your reply buddy.

@JustMoparJoe 6 ай бұрын

@@tb40ford check out my new roadrunner project. I just cut a rusty quarter panel off and replaced with AMD metal

@ShortBedWilly Жыл бұрын

Hey how you doing bro how Much the bottom ended up with no paint and you topped that off with coating mind me asking I’m looking for the best advice on using a rust protector

@JustMoparJoe Жыл бұрын

Thanks for asking. Anytime I use rust encapsulator, I recommend coating it with something. You can scuff and paint over it with enamel.

@ShortBedWilly Жыл бұрын

@@JustMoparJoe ohh ok I seee so far your the only guy with videos relating to my issues I’m working on restoring a 97 Chevy Silverado and I noticed on your video the top half stayed black and the bottom didn’t but didn’t you coat the bottom ? But thanks for replying I’ll definitely be fallowing your steps bro thanks a lot !

@JustMoparJoe Жыл бұрын

@@ShortBedWilly yes sir. The bottom was a rubberized undercoating. In direct sun, it will fade. I also did a raptor bedliner over rust encapsulator as well on the channel.

@ShortBedWilly Жыл бұрын

@@JustMoparJoe what would you recommend me the most to throw over the rust a encapsulator , what do you think is the best coating to top it off with ?

@ShortBedWilly Жыл бұрын

Also thanks for taking the time to reply brotha I highly appreciate you man !

@incognito8p298 10 ай бұрын

I don't suppose the rod was the reason it wouldn't spray evenly? Perhaps that hose is meant to whip around inside the space and spray more evenly.

@bogodfrey5789 7 ай бұрын

Do you have to have your frame down to bare metal to use this?

@JustMoparJoe 7 ай бұрын

I think it’s better, but no, you can go over any well prepared surface

@johnelliott7375 2 жыл бұрын

That is a great way to test for rock chips. I would loan you mg ol 10 ga.

@JustMoparJoe 2 жыл бұрын

That would blow a hole in one!

@ChurchInAshes Жыл бұрын

Dude you should have gotten the platinum one, it's way better than the black encapsulator

@JustMoparJoe Жыл бұрын

I’ll try it out. Did you see how well the regular stuff has lasted?

@anaconda7540 3 ай бұрын

What does it do in salt is the real test

@JustMoparJoe 3 ай бұрын

I don’t have any here 🤷🏻‍♂️

@PTucker0864 2 жыл бұрын

Oh yeah.....you scary with a 12 gauge. LOL Good stuff! 👍

@JustMoparJoe 2 жыл бұрын

It was a fun video and test. I just should have stepped back another 50 feet 🤣

@AlazarAnbesaw Ай бұрын

Isn't it sad that you had to remove a video of a small TOOL BOX being shot might scare somebody?? Smh ... I'm afraid of what's next.

@JustMoparJoe Ай бұрын

It was pretty funny. I should have backed up another 20 feet😂

@TheWhiteAfghan 10 ай бұрын

Your missing the main ingredients salt

@sevensinsvelocityshop7563 2 ай бұрын

You’re missing the point here man, rust encapsulator is for metal that’s already corroded. It encapsulates it and stops it from progressing. Looks like it did its job

@truthisweareallgonnadie. 8 ай бұрын

They have some new stuff out now calls rust Encapsulator Plus they say it's 2x more durable 🤔

@JustMoparJoe 8 ай бұрын

I’ll have to try the 00 buck! 😂

@burningsporkdeath Жыл бұрын

Like just because of the 12 ga. test.

@JustMoparJoe Жыл бұрын

Thanks! I had to remove the actual test footage so it wasn’t flagged 😅

@RodknockRhett Жыл бұрын

01:18 rubberized undercoating just makes stuff rust…

@JustMoparJoe Жыл бұрын

Glad I sprayed it over rust encapsulator

@minibikelife1062 Жыл бұрын

You are suppose to paint the rust encapsulator when it is being exposed to sunlight

@JustMoparJoe Жыл бұрын

I like to paint it regardless of it being exposed or not. But unlike the POR15, it doesn’t explicitly say it has to be painted. My favorite application of it is to use it as a rust neutralizer on areas. I have primed, painted, and even put body filler over areas where it is applied.