Easy Barn Doors For A Bedroom Closet

Рет қаралды 288,144

4 жыл бұрын

Looking for step-by-step instructions? Head over here: bit.ly/3467gQ8
Affiliate links to things you see in this video:
6 ft. barn door hardware: amzn.to/2LNHRV5
12-inch barn door handle: amzn.to/2DVoogD
Sliding barn doors add great character to any room, and when you have the space, they do wonders to accentuate a bedroom closet. I recently replaced the closet doors in my daughter's bedroom with these closet doors made form cheap pine lumber, plywood and hardware purchased on Amazon. If you'd like to add a dramatic look to a room with a rather simple woodworking project, take a look at the build video below - step-by-step instructions are on Gadgets and Grain: bit.ly/3467gQ8
#woodworking #DIY #BarnDoors

Пікірлер: 154

@MaleficaRue 3 жыл бұрын

damn, not only am i impressed about your woodworking skills but your video shooting skills also deserves an applause! amazing

@vannava0683 4 жыл бұрын

My father was a handy man, I miss him so much. I know he would be down to do this project with me.

@CampbellSuperKids Жыл бұрын

Same here. I miss mine so much!

@melissah3772 2 жыл бұрын

Wow the editing and filming is so impressive. I love the little instructions written on tape or on the wood. Super cute and pleasant to watch!

@honestlyrealco 2 жыл бұрын

Love the vibe of this straight-to-the-point video with the music and all! Thank you so much for the inspo!

@marisarosas9503 4 жыл бұрын

Your family is blessed to have a handy papa!

@nivedmurali8523 4 жыл бұрын

I liked this video for involving your children in this project,that made me more personal to this video,great thing Mr.go ahead we want more videos like this

@925riv 4 жыл бұрын

Wow you just gave a great Idea on how to put up a barn door for my daughters apartment. Thank you and great job.

@descripciones1445 4 жыл бұрын

Amazing job you did for your daughter! You are a master carpenter!

@honestlyrealco 2 жыл бұрын

Uhg and I love that it's two doors that open to a full view of the closet!! So good yall!

@sarahdewitt1973 3 жыл бұрын

Im going to start building a barn door for my daughters play room and this helped a lot! thank you!

@annwangatnt 3 жыл бұрын

kids are so cute, you are a great dad.

@Rigus208 10 ай бұрын

Ty for sharing, learned a lot . What a precious young lady.

@AP-nb6og 3 жыл бұрын

Great video and the doors are beautiful! Your kids are blessed to have you:)!

@dannygibson523 3 жыл бұрын

Great video, love the kids. I’ve been using the roller wheel floor guides, just because I don’t like cutting the groove in the bottom

@dorav1775 2 жыл бұрын

You’re amazing! This is awesome! Thank you for your workmanship all around, superb!

@Livindaybyday 4 жыл бұрын

Love them. Great job!

@barbaradavenport8166 4 жыл бұрын

I love how you showed all the details. You have answered all our questions. Great music and helpers too.Thanks

@chrisj9008 4 жыл бұрын

Great info and great pace in the video. I will add... I put the grove in after and I forget to remove the screw... I was building a door for a TV cabinet with barn doors... needless to say my blade was not happy....

@maternitymaternity2773 8 ай бұрын

Great job! You are brilliant.

@kathyallison4843 2 жыл бұрын

Great job and great tutorial. I will be using this for sure. Thanks.

@anthonycaldi7056 3 жыл бұрын

Looks Amazing...Well Done!

@davidjohnson6616 4 жыл бұрын

Very nicely filmed. Great job. Use a router for the groove. But doesn’t matter if you can get the job done. Groove is in the heart!

@dwightfontenot9064 2 жыл бұрын

So well produced! Great vid!

@blakells 3 жыл бұрын

This is one of the best edited videos I have ever seen! You convey so much info with camera frame and written word that it’s a pleasure to watch. Please get into major motion pictures, haha

@altagraciaoquendo2580 2 жыл бұрын

Thank for sharing loved especially working with the kids God Bless

@dreamingcode Жыл бұрын

So amazing to do this with kids.

@flaviopagliero301 3 жыл бұрын

Great job! looks so good.

@usedcarsokinawa Жыл бұрын

Great idea, great video! I’m getting ready to do just this

@anthonycaldi7056 3 жыл бұрын

I would do that groove at the bottom of the door on the tabe saw as you did for the plywood panel. I would cut the groove out on the precut frame (lower piece) prior to assembling the door.

@clementcharlebois 4 жыл бұрын

Cut that groove with the table saw before assembly, or cut the groove with a small trim router and a guide if already assembled.

@mrmarkfive 3 жыл бұрын

Clément Charlebois I agree. A small trim router and slot cutting bit. Easy.

@augiemommy 4 жыл бұрын

Woodwork + Details 👏🏻

@hascjl 2 жыл бұрын

I really like the style of shooting/instruction.

@johnrodriguez5737 3 жыл бұрын

Dude, Great job. you make it look so easy. Even i can do it.

@davidcoleman6995 4 жыл бұрын

Nice work!!

@tdz69 3 жыл бұрын

Brilliant build keeping both sides the same. Many doors only have the decorative bracing on one side.

@Santinox3 4 жыл бұрын

I love your tutorials, so informative with the details!!! Thank you! I'm a new fan!

@user-cb6ed2es8s Жыл бұрын

Such a good video. Perfect

@mahmoodkhan6623 2 жыл бұрын

it,s hard to do everything alone. more power to you. OMG, you're daughter is so cute

@Wisdom2812 Жыл бұрын

Awesome video, thx! just what I was looking for! (and beautiful family!)

@Honeybee-Hedgehog-Designs Жыл бұрын

This is great - thank you

@kylehhotwork 4 жыл бұрын

Looks good.

@tamimorales1116 Жыл бұрын

Definitely cut the groove before assembling. But the absolute best part of this video is your daughter at the end😊❤

@andrizeefoshizee 3 жыл бұрын

Great work! I love this KZfaq Channel!

@anthonyswiinger1455 11 ай бұрын

Great job

@user-sz7yk4zh2w 5 ай бұрын

Wow, they look great! Cute kiddos!

@GadgetsandGrain 2 ай бұрын

Thanks so much! 😊

@frontlinefinishcarpentry4193 3 жыл бұрын

You did a really good job there buddy. 👍

@EricGreniervideo 3 жыл бұрын

Great job. Kids are so cute!

@gersoncr2124 4 жыл бұрын

Great job 👍

@inspired7270 4 жыл бұрын

Awesome job...

@LuxuryLeah 3 жыл бұрын

Father of the year 👍🏾👍🏾👍🏾

@JBPRUNTY Жыл бұрын

great video brother .. .very informative .. , love the ending !!!

@saafcamp 2 жыл бұрын

Great work. Groove in bottom... Measure out pre assembly cut into pre install. Attache to door frame with groove already made. Circel saw or router. Also wet paper towels under all drilling collects dust.

@dawnchesbro4189 2 жыл бұрын

Thank you! Seeing him on top of a ladder using a circular saw mostly above his chest made me so nervous! I wonder if just a plunge router would also work for the groove?

@saafcamp 2 жыл бұрын

For sure danger! Always better to work on a smaller more manageable piece at grade level than risk adjustments with heavy ones while elevated. All considered... Well executed! As for the end blooper... Danger!!! Lucky no fall on little one. Always secure while staging. Literally anything can happen. Wind. Kid. Dog. Ground hog avoiding bird of prey lol... Anything

@ew5044 3 жыл бұрын

You do nice work.

@montimitchell5931 Жыл бұрын

Well done

@YESSLEEP42 4 жыл бұрын

Looks good!! I plan on building me some here pretty soon!

@68grush 3 жыл бұрын

Well done. I’m fairly handy, but your level of clean work is quite helpful. I’m hanging my doors today! Wish me luck

@GadgetsandGrain 3 жыл бұрын

Good luck!

@MegaYounglover 4 жыл бұрын

Great video

@leonardattard3790 Жыл бұрын

Excellent workmanship. Great video demonstration. With respect to making the grooves for the door to slide on the bottom, I would suggest to groove them when you have cut your two vertical and one horizontal rails before you glue the panels, just saying. Hope that makes sense

@rosesmyth9064 4 жыл бұрын

awsome video!!

@hottrizzle Жыл бұрын

Great video...

@craiguglandrealty3705 4 жыл бұрын

Suggest you assembly the door frame and then slide the plywood panels into the frame before installing the last rail.

@lafn63 2 жыл бұрын

Great job dad!

@shahbazkh2885 4 жыл бұрын

Very nice

@timrosandick491 Жыл бұрын

nice job

@joelthomas4294 3 жыл бұрын

Nice!!!

@dazeyknows6736 Жыл бұрын

If you leave the door trim on it helps close the side gaps - works well. Good job tho ❤️👌🏽

@hankandrox 3 жыл бұрын

GREAT video by the way! I’d love to do this but don’t have the tools. Circular saw is about all I have. The end of your video would be my WHOLE video 😂😂

@mahzron 3 жыл бұрын

Great work dad

@jorrba3934 3 жыл бұрын

Your door turned out great! My wife wants me to build a Barn door between my bedroom and Master Bath. This will be my first time building one. I been watching so many videos trying to decide the best but easy way to make one. I do like the fact that your door has the two frames on both side. How thick did your door turned out to be?

@jamesblake1848 Жыл бұрын

Nice video the ending was perfect because some jobs are not without an accident or two 👍🤣

@MsAlcazoo 3 жыл бұрын

Come to Miami! I wish I could do this

@SergioSanchez-qd4dr 4 жыл бұрын

Thank you . Your videos are awesome

@ramchandrasubramanian9907 3 жыл бұрын

Nice Tutorial, suggestion : Cut the grooves before assembly, much easier to manage and handle, the ladder collapse could be avoided that way..

@DirXRoloMusicVids 2 жыл бұрын

Aye bro that lil ring door clip was too hard lol

@FixItYerself 4 жыл бұрын

nice door

@ninper007 4 жыл бұрын

Great job. Love the wall color. If you don't mind what is that wall color?

@celiatyler1655 2 жыл бұрын

For the slot in the bottom of the door- lay door flat on bench and use a slot cutting bit in a router.

@happy023 Жыл бұрын

I really love the idea!We are in the process of renovating and I wanted to incorporate that in our design but a pantry though. You think 4 ft deep × 7ft long enough for double barn door? Please advice, thank you!

@Tigerratcat Жыл бұрын

Hi nice video. Can you advise if the new Trim can be flush mounted to the jamb? Or is it better to have a few mm offset reveal. Why isn’t it normally ever done flush? Is it so there’s a recess for the gap filler?

@tylerevans2261 Жыл бұрын

ooooo nice video, following

@rogersanchez9635 2 жыл бұрын

I have that same toolbox

@wesleyedmonson8151 Жыл бұрын

Very nicely done. What was the size of your top casing board?

@hachmannfamilyemail4877 4 жыл бұрын

I I'm going to do a barn door in that goes into my bathroom and we are going to use a regular door with no holes in it and hang it like a barn door

@user-ok3zt2xh8j Ай бұрын

Router works well

@kimberleyderricutt8537 3 жыл бұрын

I was so surprised that the door didn't knock over the ladders ... then i saw the outtakes 🤣

@mrdanielface 4 жыл бұрын

Great job 👏 👍

@mahmoodkhan6623 2 жыл бұрын

i dont have a table saw. is there any way to cut the grooves with just a circular saw? would you recommend i buy a certain kreg jig product for that?

@jmackinjersey1 3 жыл бұрын

As far as the groove on the bottom of the doors, why didn't you make them with the table saw when you were making the cuts for the panels?

@teresitafaure4230 4 жыл бұрын

Hello. I thoroughly enjoyed your tutorial. My question to you is in your opinion do you think I could use the current sliding closet doors for a sliding barn door? The are those orange brownish hollow doors. Or, do you think I should use the doors as French doors, instead? I’m trying to keep costs down and use what I have. Thank you.

@cinepost 2 жыл бұрын

All you need is a wood shop and ten thousand dollars worth of woodworking tools at your fingertips and you should be able to salvage your free doors……1,2,3!

@Floppyearsmomma 4 жыл бұрын

Nice job, but you scared me on that tall ladder!

@mundlkalli4396 3 ай бұрын

GREAT VIDEO, DEMO AND SIMPLE BUT VITAL EXPLANATION. THANK YOU VERY MUCH !!!!!! QUESTION......DEPENDING ON WHAT SPACING IS REQUIRED ON THE TOP WHEN INSTALLING THE RAIL. LETS SAY IT CAN BE BETWEEN 1 3/8 -1 3/4 BUT THE THICKNESS OF THE DOOR IS ONLY 1 1/4 ....CAN YOU JUST RUN A BOARD ON THE TOP (BACKSIDE) WITH A THICKNESS THAT WOULD FALL IN THE REQUIRED RANGE. ??? THANK YOU AGAIN

@GadgetsandGrain 2 ай бұрын

That should work. Good luck!

@jw1952 3 жыл бұрын

Router with slot cutting bit

@elifernandez3769 10 ай бұрын

Cut the groove for the guide on the table saw before u assemble the whole door. Be a little safer than standing on a ladder with a skill saw.

@faronmastin8683 2 жыл бұрын

Use the table saw on your bottom board before you put it on the door frame. for the slot

@eboricua201 Жыл бұрын

ARE YOU PLANNING TO VISIT PUERTO RICO ANYTIME SOON?

@joannebogias9299 Жыл бұрын

👏🏻👏🏻👏🏻👏🏻

@ThePandaFather 3 жыл бұрын

Couldn't you make a jig and use a router with a thin deep bit to do the bottom groove?

@thehawkc 3 жыл бұрын

Uses a router to cut the groove and when you hang a American flag the stars are on the left ,not right. But great video.

@hankandrox 3 жыл бұрын

Why didn’t you grove the bottom panel before assembling the door?

@luptonpittman6520 3 жыл бұрын

I would recommend folks use screws, not nails to secure the header board to the studs. That is unless you’ve hit the lottery and the lag bolts line up with the studs.