lol your right I should have turned the video facing the opposite direction, those bottles are meant to be facing down so the content is ready to be squeezed they are sold at Jerrys Artarama the intent is to have less air so it most be keeper upside down, the opening is a rubber that opens when squeezed Thanks for been here 💐💐

Thanks for the tip!

Yes lol i did tried that after your suggestion thanks so much 💐

Thank you for your support ❤

Big thanks Cynthia xx

AWWW thanks so much so happy to liked xx

Thanks so much for your comment ❤ Since all paints of any brand have different consistency and density it’s hard to have an exact ratio, opaque paints will thicken up more than a semi- transparent or transparent acrylics, a soft body or high flow are my preferred choice, I start with a 3parts pouring medium 1 part paint, to thin if needed I don’t add more gloss varnish of any type, too much gloss will make your cells spread and get larger and wonky during tilting or spinning. My choice is gel gloss medium, I add Golden Wetting agent diluted in water 1/4 once to 8 once’s of water, this won’t disturb the integrity of your acrylics due to the gel medium has acrylic polymers, mix 1/1 ratio let it rest overnight then stir fully and let it rest for bobble prevent bubbles, this is my consistency solution, if you need further assistance with the bloom technique please don’t hesitate to contact me on messenger for a face to face guide Thank you for your support ❤ hope this was helpful

You made my day dear Big thanks

I use USA Floetrol and yes Amsterdam, JoSonjas and Atelier work very well for the Cell Activator..4 tsp US Floetrol..1 tsp Amsterdam titanium white or Lamp black or Oxide Black..I full dropper acrylic ink..5 drops water to start..15 drops Minwax pre stain woos conditioner..1/2 tsp PVA Glue mix very well, make small batches store on a 2 once squeeze bottle, you can refresh the CA after 3 days with a small squirt of Floetrol and a few drops of oil 2 drops water …feel free to ask any questions 🌹thanks for your support ❤️

The Pouring Medium bottles are from Jerrys Artarama and the small squeeze bottles for the CA at the dollar store

one or the other for the Behr 8300 my new ratios are 3 to 1 1/2 polyurethane for or 1/1 minx 3x thick equal to varathane triplethick I was having problem with my paint cracking or having texture problems at the edges after stretching so I stoped using the polycrylic, I think the surface was drying too fast, you can find the Minwax 3x thick for about 17.00 on sale at Amazon vs Varathane 26.00$ at home Depot, thanks for been here💐💐

it depends on the paint consistency and pigmentation, very hard to tell you I will make a video with different consistencies so you can see, you can always add water with flow aid like i do or more varnish, there are heavy body paint, mid consistency like Jo sonjas, Masters touch,, Amsterdam and even fluid like Golden, Matisse is easier to see will make video tomorrow dear

that's the hardest to judge it all depends on the paints thickness, they are all so different, start with 1once Pm the add a small amount of any paint, fluid, medium body or heavy body mix well look at the color add more if need then add another once of PM mix well if thinking is needed have a squeeze bottle ready with 1/2 polycrystalline or triple thick or Josonia 1/2 water to achieve as close of the preferred consistency, judge mine by using a mixing spoon pour out the paint mix and count to 2 and it should be leveled with the paint on your container, if you use Golden fluid none or very little water mix is needed, hope it helps, please let me know if you encounter any issues that i can be of assistance. Thanks or your support😃

Lol, I don’t see it upside down ?? I used an overhead recording tripod, you see what I see, I really appreciate your support and comment but I don’t know what you mean, please explain, thanks 🙏

Im only using US Floetrol for the Cell Activator