Easy DIY Cabinet Doors | Can I Make Shaker Doors with only 3 big Tools??

Рет қаралды 661,134

4 жыл бұрын

Can I Make Shaker Doors with only 3 big Tools?? Learn how to make Easy DIY Cabinet Doors. I have shown you a few videos on how to make cabinet doors, Cope and Stick, Rail and Stile, Shaker Style doors.....all the same thing and in the end, as long as you have time, you save a TON of money making your own doors!
You may have seen me talking a lot in the video even though you may not hear me and that is because I have been doing some building on livestream! Those streams and videos are on a second channel, check it and sub if that's your thing! bit.ly/2x8KIU8
📔📙All our Digital Plans: bit.ly/2Mm6slA
Cabinet doors are quite easy to make and I hope this video helps show you how simple the process actually is! These doors can be made with no router table or expensive router bit. Next time you want to redo all the kitchen cabinet doors do it yourself!
Some tools I like (some affiliate links):
Kreg K5 Pocket Hole Jig: amzn.to/355jfOC
Kreg Forman: amzn.to/2OXvyaA
Kreg R3: amzn.to/2OZy8gc
Switchpod (mini tripod): bit.ly/2JUMET1
Moisture Meter: amzn.to/2SwBy9i
Mixing-Mate Paint Lid: amzn.to/2vXsq7P
Kreg ACS Track Saw: amzn.to/2OZXVVw
EDC Tool Belt: goo.gl/XZnWRx
Nail Puller Pliers: amzn.to/37frZUq
Miter Spring Clamps: amzn.to/2O8oYhv
IsoTunes Xtra: amzn.to/2NBu7zw
Kreg Drawer Jig: amzn.to/355rIBp
Fuji Q5 5 Stage Turbine Spray System: goo.gl/ZAJF5g
FastCap 16oz Glue Bot: goo.gl/X5aNZ0
FastCap 4oz Babe Bot: amzn.to/1KEuIUf
Swanson Combination Square: goo.gl/EYuGAn
Bessey Quick Clamps: goo.gl/jVAzeu
FastCap Tape Measure: goo.gl/t2lWJD
EDC Tool Belt: goo.gl/XZnWRx
Brayer Roller: goo.gl/bc5uIE
3M Respirator: goo.gl/ZexRQd
3M Respirator Filters: goo.gl/92Ejh0
RIDGID Stealth Force Impact Driver: goo.gl/K2jKgG
Katz-Moses Dovetail Jig: bit.ly/DVTJig
Titebond TiteWrap: amzn.to/2F9AALM
Mirka 6" ROS Sander: amzn.to/2Eijyfv
10 Million Dollar Stick: amzn.to/2SrKvjS
Follow us:
DIYTyler.com
/ diytylerg
/ diytyler
#diycabinetdoors #shakerstyledoors #easydiycabinetdoors

Пікірлер: 250

@ako5816 3 жыл бұрын

Thank you for this, I’m in the process of building a cabinet for the garage. This approach makes it so much easer with the tools I have.

@djwolbert2226 3 жыл бұрын

Just watched your video because we are in the process of giving our kitchen a facelift. I decided to replace all the cabinet doors and am almost finished making these shaker style using your recommendations. So easy and intuitive if you have the tools. I just needed to pick up the Kreg pocket tool. Thanks for the great DIY video...

@baz9438 2 жыл бұрын

I followed your instructions and I'm delighted with the results thank you.

@bryanmcallister7458 4 жыл бұрын

This is my second DIY Tyler video in as many days. I'm a fan! I like the focus on a few basic tools. The camera work is good. The editing strikes a good balance with focusing on the details that I find helpful, and spending less time on less important things. The audio is good. I'll be watching more of these. Good production values, informative, and practical. Thank you!

@DIYTyler 4 жыл бұрын

Thank you so much Bryan, glad to have you aboard!!

@Bizzare77777 Жыл бұрын

@@DIYTyler How wide is each door?? Thanks!

@Moer2844 3 жыл бұрын

You make it easy for a beginner. I need to make 3 doors for my hutch. Thanks for such clear and precise instructions. I don't own alot of tools yet. Thanks.

@karynm3365 Жыл бұрын

I love how you're so safe while cutting the wood!

@puwazatza 2 жыл бұрын

Tyler, thank you so much for your tips and tricks for shaker cabinet making. Your instruction was so helpful when I was noob!

@TwoMooseDesign 4 жыл бұрын

Awesome video! 👊🏼👊🏼

@healthballnut 3 жыл бұрын

Great video, I always learn good ways to improve my wood working when I watch your videos. I have been using your great method to build drawer boxes with pre finished plywood and they turn out perfectly. Thanks again.

@bernhardtammen4463 4 жыл бұрын

Dankeschön fürs Zeigen Schöne Ostern wünsche ich dir

@GetToThePointplz123 3 жыл бұрын

The kreg jig for the euro hinges is sweet, gotta get one

@Bentleys-Mom 3 жыл бұрын

I am totally amazed. I love building things and your vid was super helpful esp if one does not have all the tools that most builders have. A table saw and a chisel was more than enough to make that groove. Thanks for making this vid.

@beverlybright6883 Жыл бұрын

The BEST VIDEO that I've seen for creating these cabinet doors.

@powertrain4786 3 жыл бұрын

Very well done video.... Concise and clear. Thank you.

@jesusHernandez-in7lu 4 жыл бұрын

Excellent your work Sr. Congrats !.

@winstontv717 2 жыл бұрын

Great job! Thank you for sharing.

@JkCanvas 4 жыл бұрын

Great video and thank you for teaching us how to make cool things

@mikehiggins8673 Жыл бұрын

Love the blue masking tape band-aid. I do that, too

@el-mq4fe 2 жыл бұрын

Nicely done video. Short, sweet, simple, and to the point. What actually struck my eye to look at your video is you really resemble my friend from New Kensington, PA from many years ago. You even sound like him. I have been living in another country so we lost touch.

@sharit7970 4 жыл бұрын

Very useful content, easy to follow, thanks for posting!

@FredMcIntyre 4 жыл бұрын

Nicely done Tyler! 😃👍🏻👊🏻

@mariopanteli7924 2 жыл бұрын

So glad I found this! Great video, great instructions and saves the pennies!

@thelwood 3 жыл бұрын

Nicely done!

@ramonibarra9582 4 жыл бұрын

Disfrute mucho su video ,Gracias me dio una excelente idea ,gracias pir ayudar 👍👍👍👍

@Joe-ip2ky 3 жыл бұрын

Very well done thank you!

@redouanelehiane5192 3 жыл бұрын

Simple and great

@jsowoodworker1265 2 жыл бұрын

Great video right up to the pocket jig part.

@patrickstanfield3416 4 жыл бұрын

Nice! Quick and easy with minimal tools!

@DIYTyler 4 жыл бұрын

Yes indeed! That was the plan!

@andrewjohn7952 4 жыл бұрын

Definitely my fav DIY channel. Wish I had your amazing set up. Lucky guy

@DIYTyler 4 жыл бұрын

Wow, thanks!

@Jesse-jc4vv 2 жыл бұрын

Marines in the house!!!

@DIYTyler 2 жыл бұрын

Hoorah

@cecilianguyen991 2 жыл бұрын

Thank you for the video.

@kaisermuzik8540 3 жыл бұрын

GOOD JOB THANK YOU

@C-Mah Жыл бұрын

Great thank you

@kenj1862 3 жыл бұрын

Just wanted to thank you for this video was able to make mine following this video and turned out great. New subscriber!

@merarisepulveda2990 Жыл бұрын

This was a great tutorial. Thank you!!!

@jacobjoeljoncas 3 жыл бұрын

Thank you!

@jdubya54 7 ай бұрын

Thank you great video

@georgecarmona1817 Жыл бұрын

Amazing work thank you 👌❤

@researchcapt 3 жыл бұрын

Good ideas....thanks for the video.

@enszarcstudios145 3 жыл бұрын

Thank you for the informative video. I like how you stop every now and then and point out the details of your process and why you do it that way. Your attention to detail is appreciated. Do you have a video on how you finished the door with the white 'paint'? If not, what was your method. hmm, maybe a follow-up video?? :-) Cheers, Gus

@Symbiote-7 Жыл бұрын

Awesome bro thanks

@Motokarts 3 жыл бұрын

Your videos and attention to detail are awesome 😎

@garynagle3093 4 жыл бұрын

Nice and simple. Just the way I need it. Stay safe!

@DIYTyler 4 жыл бұрын

Thanks, you too!

@seabass523 Жыл бұрын

Thanks for sharing

@deanv8663 2 жыл бұрын

Great video! Thanks for the useful tips.

@kellysean25 3 жыл бұрын

Hi im a mad diy man and your videos are inspirational thank u looking forward to seen more, Cheers Sean Kelly

@terrythompson4126 2 жыл бұрын

Wow! Tyler, thank you for that. I now have a better understanding of the process. And... I also see that my kitchen full of “custom cabinets” with the doors falling off is nothing more than the cabinet maker’s blatant disregard to do quality work. Set aside the fact he used cheap material that’s now falling apart. I probably would have never known had he been more precise with his measurements, maybe used some freaking glue, pre-drilled some holes. Hell, I don’t know 🤷‍♀️ maybe watched one of your videos, before charging someone 16k for a bunch of crap that showed up unfinished and jacked up!

@rudycockrell8029 3 жыл бұрын

Nice and simple

@PatrickEArchuleta-fs8bv 2 ай бұрын

You're work is second to none outstanding work may God continue to bless you.

@DIYTyler Ай бұрын

Thank you so much 😀

@Lacer-1985 4 жыл бұрын

Good work look awesome 👍🏻

@lokmansheikh6420 3 жыл бұрын

Good job, thank you boss

@IftikharAhmad-fv7rk 5 ай бұрын

Nicely explained Love it❤

@seabass523 Жыл бұрын

Nice quick and easy 👍

@cscs65 4 жыл бұрын

👏👏👏👏 ótimo trabalho

@nguyennguyenvu254 2 жыл бұрын

so touching for an excellent video

@timhalcomb4041 4 жыл бұрын

Enjoyed the build thanks for sharing have a blessed day.

@martyclack8782 4 жыл бұрын

Great job Tyler hope all is well with you and the family. Stay safe my friend. See on the next video or pod cast.

@DIYTyler 4 жыл бұрын

Thanks! You too!

@allankennedy3931 10 ай бұрын

great allan

@gergemall 3 жыл бұрын

Nice job

@marcioluislorenzi 3 жыл бұрын

Easy and practical

@DIYTyler 3 жыл бұрын

Yup, that was what I was after!

@danmaciosekmaciosek6166 4 жыл бұрын

Made similar doors myself. Glue and pocket screw frames , then use router table for dado for panel. Important to lay out pocket screws correctly so you don't hit with router bit. I enjoy your videos ,you do a great job

@42lookc 4 жыл бұрын

Great tip! THANKS!

@IEnjoyCreatingVideos 4 жыл бұрын

Nice work Tyler! Thanks for sharing the video with us!💖👌👍😎JP

@DIYTyler 4 жыл бұрын

My pleasure!!

@IEnjoyCreatingVideos 4 жыл бұрын

@@DIYTyler 😎

@lenny877 4 жыл бұрын

It's a good idea , but you can make normal shaker doors with just a table saw

@sajadwoodwork 3 жыл бұрын

Nice work sir please keep it up

@jacoboalamea717 4 жыл бұрын

Good job bro

@user-qg6fy4yp8t 4 жыл бұрын

Good video 👍

@fraisdegout 2 жыл бұрын

Thank you for the great video, I plan on following this exact method to redo my kitchen cabinet doors. Isn't a 1/8" hardboard too flimsy for the panel ? Just wondering...

@PatrickKrabbe 4 жыл бұрын

nice doors!! love how you made them. hope your all ok in the nice USA! greetings from the Netherlands

@DIYTyler 4 жыл бұрын

Thank you! 😊

@31pkelly 4 жыл бұрын

another great video..

@DIYTyler 4 жыл бұрын

Glad you enjoyed it

@HisnamFinitureinterior 3 жыл бұрын

Good job👍

@spookyncutey4577 Жыл бұрын

I love this would you be able to do a shaker style door for kitchen but using cane ! Like cane on the front ! I have a farmhouse/boho style and I just wondered if cane style shaker doors is such thing ;)

@bkeithmontgomery 4 жыл бұрын

Awesome, thank you! That was exactly what I was looking for, as we have all of those tools!!!

@DIYTyler 4 жыл бұрын

Awesome, EXACTLY the point of the video! Appreciate you watching and taking the time to comment Keith!

@DIYBuilds 4 жыл бұрын

where did you get the tinted poly?

@DIYTyler 4 жыл бұрын

General Finishes.

@DIYBuilds 4 жыл бұрын

@@DIYTyler do you have to prime the cabinet first or just the tinted poly?

@ositoperrito 2 жыл бұрын

Great video, the problem is where do you find flat squared wood. Jointer and planer is must!

@andyjones6361 2 жыл бұрын

Doors look great. Simple, quick, effective! Functional! economical! First thing I’m going to make is drawers! Gotta organize!! Out of control!

@paulshewmaker4568 4 жыл бұрын

Nice!

@DIYTyler 4 жыл бұрын

Thanks!

@dougdiplacido2406 4 жыл бұрын

Great door project. Love the blue bandaid, hope it was a minor nick. Happy Easter to you and your family. Stay safe.

@DIYTyler 4 жыл бұрын

Thanks for watching Doug! Tiny little scratch but it kept bleeding on the doors! Happy Easter!

@TheWeekendDIYer 4 жыл бұрын

Nice job on your explanations! Keep up the great work Tyler!

@DIYTyler 4 жыл бұрын

Thanks! Will do!

@tonyrodriguez4943 4 жыл бұрын

4:54 "hit the back wall" Nice

@jeffhallford5284 3 жыл бұрын

If you have never launched a board with a table saw, it can be quit impressive.

@niteraven7333 3 жыл бұрын

I like it, simple yes and will have to try soon for one of my cabinets that dont have doors.

@ariehangara5691 2 жыл бұрын

Boss you using what kind of wood look very soft n good

@USMCTexan 2 жыл бұрын

I see that Marine cover at the end, Semper Fi devil!

@ewd1020 4 жыл бұрын

I just bought a cheapo porter cable nailgun at home depot and started using it on my projects. Love it so far. What size nails did you use on this project? I would expect they would have to be really short.

@DIYTyler 4 жыл бұрын

They were, pretty sure 1/2"

@gpleeser5832 3 жыл бұрын

You earned legend status my friend...Thank you!!!

@sammccarthy9963 Жыл бұрын

What size nail or brad did you use to nail the play wood into the channel?

@cornhole615 Жыл бұрын

What would recommend making 6’8” length worried about worping door size 32”x 6’8”

@Tang0Fox1 3 жыл бұрын

Wouldn't a router have been a good option as well for that saw technique? Or is it faster to do it that way?

@theokayengineer Жыл бұрын

I might steal this idea but instead of a table saw use a router bit to create the 'pocket' for the back. Nice work!

@bbur75 Жыл бұрын

What type nails and nailer did you use for the panel inserts?

@BronkBuilt 4 жыл бұрын

Are you going to fill the pocket holes or the over cut in the rabbets? If so, what's your favorite fill media?

@DIYTyler 4 жыл бұрын

If I was going to, find it a good incentive to close the doors, I would use spackle or water putty.

@bryanmcallister7458 4 жыл бұрын

@@DIYTyler Thank you! So, you wouldn't use the Kreg dowel pieces that they offer? I find those to be a pain in the neck to install and size, and if that's what you typically use, it would've been cool to see what tricks you recommend. However, it sounds like you favor a different approach. Thank you!!!

@willarid1 4 жыл бұрын

Wife wants to upgrade kitchen your video showed her how simple it is for doors to save thousands of dollars.

@DRJMF1 3 жыл бұрын

For the frame, what is the size of the wood eg 2x1 inch ? I think I do same but with lap joints. Thanks.

@naomeefreedman9194 10 ай бұрын

Hi, is it possible to change the look of raised panel doors into shaker doors, diy on a budget? Or is it more complicated since panels are raised? (The cabinet doors are in excellent condition and structurally sound, would like to keep them just makeover the front, any budget friendly ideas? Thank you for your time

@collindavis2656 2 жыл бұрын

What side Brad nails did you use with the Brad nailer?

@Gustavo-nu1kq 3 жыл бұрын

What type of wood did you use for the rails and styles?

@carlosbarros1969 4 жыл бұрын

What kind of paint do you use for kitchen cabinet? I have Sawn like plastic paint...

@user-dt5rh5xq4h 5 ай бұрын

Which tooth count blade are you using to cut the rails to length? 60 or 80 tpi?

@BlackdogADV 4 ай бұрын

I thought the panel insert needed to be free floating so it can expand/contract freely?

@cambrosn 7 ай бұрын

Cutting a rabbet like that is exactly why I have a 3/16" dado in my left middle finger distal phalanx.

@jerrycasper614 3 жыл бұрын

This is great! I need 7 doors for a bathroom vanity and tall cabinet and a professional cabinet company want $2,400.00 to do it. I have all the tools and will give this a shot. By the way, what is ratio to door size to cabinet opening? How much bigger than the opening do they doors need to be?