Easy Fix | Car Hood Release | Rusted Primary Latch

No video

Easy Fix | Car Hood Release | Rusted Primary Latch | Save Money TV

Рет қаралды 88,303

Күн бұрын

The easy way to open the hood of your vehicle by yourself when the primary latch is rusted closed. Then fix so it doesn't happen again. Very easy, very cheap. Just what we LOVE!
0:00 Introduction
0:26 Primary Latch Release Location
1:22 Hood Release (Primary Latch) without a Helper
2:06 Popping the Hood
2:25 Preventative Maintenance: Oil Hood Latch
#diy #seizedhood #carrepair #primarylatchrelease #automobilerepair #savemoney

Пікірлер: 31

@anoni4246 Ай бұрын

Thank you so much man of making it simple. Ace, thanks legend of simplicity. 🙂 worked instantly I used socks because my latch release is not like yours,smaller. It was easier than I thought too. I approached it violently just like you said. I thought it would take man strength, thanks anyway. Independence is so lovely and uplifting. You've made my day. Thanks also for the DW 40 tip I didn't know that would've used original DW40. I didn't know that one existed in UK never seen it before. Bye

@grantp4022 4 ай бұрын

Great creative and cost smart way to unlock your hood that is stuck closed. I'm going to try exactly what you did, and hope it works ? Can you spray on some rust remover ? and you say be "careful" with penetrating fluid ? Does that mean not to use penetrating oil, or just be careful to get it directly on the latch ? I hope this works on my stuck down hood, which has rusted, or maybe frozen in the cold weather.

@mannybooge3953 4 жыл бұрын

Great little tip! Mother-in-law's battery was dead and Hood wouldn't open. I didn't think the latch could be that rusted , however i did what you said and got it open. I tried to lock the latch after lubricating the latch but it still wouldn't move. I used your tip 2-3 times (after shutting the hood and lubricating each time) and now the hood pops up like new when I pull the release! Thanks!

@maryannm0107 Жыл бұрын

😊😊😊😊😊😊

@grantp4022 4 ай бұрын

I'm going to try this as well, and hope it works for me. Did you spray on any rust remover ? or did you use any penetrating fluid on the latch ?

@teedtad2534 Жыл бұрын

Tips like this are life savers!! 🩸🎯🩸🎯🩸

@SaveMoneyTV Жыл бұрын

Glad it was helpful. Thanks for watching!

@shannonmelissa4973 5 жыл бұрын

Thank you! I thought my cable was broken, but it was just a seized latch. This worked great!

@SaveMoneyTV 5 жыл бұрын

Glad to hear it was helpful. All the best!

@leetaylor3531 4 жыл бұрын

@@SaveMoneyTV i cannot believe the WD40 actually worked!!! i was convinced the cable had some how stretched and would need some extensive work to fix. Sprayed the lube, left it 10 mins and it worked like a charm!!! thank you so much

@michaelponich1887 Жыл бұрын

You are a genius

@SaveMoneyTV Жыл бұрын

Thanks, hope it was helpful. Thanks for watching!

@clarenced4090 Жыл бұрын

Thanks for the vid, Hood wouldn't shut on my cobalt. Works like brand new now👍

@SaveMoneyTV Жыл бұрын

Glad it helped. Thanks for watching!

@IQBALHUSSAIN-xs8ws 5 жыл бұрын

Thanks so much for this video. This works for me. My hood popped up but the secondary latch still wouldn't work so had to use a long screw driver to open the latch with a bit of pressure. Once open I sprayed WD40. The only other things i did was : cleaned up the messy surfaces with clorex wet wipes and it took out lot of messy grease and also i had put a piece of cloth under the latch before spraying the Wd40 since i wasn't sure if extra spray can have side effects on the bottom of the surface. Anyways the trick was great and it was definitely money saver and easy to do it. Thanks again.

@SaveMoneyTV 5 жыл бұрын

Glad it was helpful. The main thing when spraying oil is no not get any near your O2 sensor(s). WD40 doesn't last long, it's a good idea to spray the late once or twice a year. All the best!

@IQBALHUSSAIN-xs8ws 5 жыл бұрын

@@SaveMoneyTV where are the O2 sensors located?? Just heard from one handyman today that WD40 with silicon last much longer than regular ones and it doesn't drip because its silicone based. Do u think that one would be a better fit here?

@SaveMoneyTV 5 жыл бұрын

Hi Iqbal, it varies from vehicle to vehicle but most likely just after where the manifold meets the exhaust pipe. It's not very close to the latch but just worth a mention to be thorough. Silicone's good, but I'd still treat it at least once per year.

@IQBALHUSSAIN-xs8ws 5 жыл бұрын

@@SaveMoneyTV thank you sir... very helpful tips 👍

@lexusvip4003 5 жыл бұрын

Take it in to get an oil change and let the mechanic deal with it 😂 (In my Auto Class, I felt like everyone did that to us. We didn't mind it though. It's usually just a quick fix! And the customers are always happy to know it's done)

@SaveMoneyTV 5 жыл бұрын

Sneaky! I like how your mind works. That's a good suggestion!

@Adrienne3071 5 жыл бұрын

That's what I did.

@Rockie4662 7 ай бұрын

Brilliant

@CHENOTV 4 ай бұрын

But I need a jump start 🤦🏾‍♂️