How to detailed hard surface with a simple knife tool and 3D cursor trick. Like & Subscribe for more. Music: • Sigma Male Song Remix ... #shorts #tutorial #blender #hardsurface
Пікірлер: 171
@ArijanRace10 ай бұрын
I make detailed modeling lessons on Patreon, you can find the link in my About page!
@wizart2100 Жыл бұрын
This guy loves origin point modeling
@ArijanRace Жыл бұрын
3D cursor is underrated
@darien_3D Жыл бұрын
@@ArijanRace 2 true
@iulianhagea5815 Жыл бұрын
I allways use 3D cursor in my workflow.
@BECK_4D Жыл бұрын
if you are not using the 3D cursor a lot start learning how to because it is really useful
@Blap7 Жыл бұрын
@@BECK_4D alright man
@Xanatis Жыл бұрын
I heard the blender community was above and beyond supportive but the comments on shorts makes me seriously question it 💀
@ArijanRace Жыл бұрын
It's ok they are still supporting my channel by giving me views and comments 📈 Check out my discord, it's s nice community there
@babaslapofficial Жыл бұрын
Some of these comments have to be ai generated 💀
@ArijanRace Жыл бұрын
@@babaslapofficial it's ok because hate never comes from above
@slickricky769 Жыл бұрын
Pretty sure no everyone that watches the shorts can actual do 3D so 😅
@Teh_Random_Canadian Жыл бұрын
@@slickricky769The people here are here to learn, at least I am. This guy in general though seems to have trolls follow him and complain about his techniques on every video.
@gifdoozer Жыл бұрын
reccomending to use a plane with a surface deform modifier so you just gotta bend the plane so it's a non destructive operation :3
@ArijanRace Жыл бұрын
Good idea, I will try this, thank you
@bwarbahzad63978 ай бұрын
:3
@thebestcommenter22Ай бұрын
Shut up
@thebestcommenter22Ай бұрын
@@bwarbahzad6397shut up
@TylerNPTOfficial Жыл бұрын
Damn i have alway use loopcut my entire life now it time for changes.
@ArijanRace Жыл бұрын
Always improving 🙏
@TylerNPTOfficial Жыл бұрын
@@ArijanRace thx you for being my inspiration the past 8 months 🙏
@ArijanRace Жыл бұрын
@@TylerNPTOfficial 100% my friend. Join my discord if you haven't already, you can always reach me there
@TylerNPTOfficial Жыл бұрын
@@ArijanRace I will soon
@prixplox Жыл бұрын
Same bro, don't even know why I didn't have the idea to just use the knife
@jtmcdole11 ай бұрын
I didn't think I needed blender shorts in my life, but this cements it for me. Thanks!
@quinnvictor1058 Жыл бұрын
Just use a lattice or mesh warp
@ultimate205 Жыл бұрын
Using a lattice would be slower, I'm not sure about the mesh warper
@finn372111 ай бұрын
THANKS
@Riley_Christian10 ай бұрын
If you wanna preserve the original mesh, then yes forsure 👍
@cloudlove1 Жыл бұрын
Love it. Obvious things are always hardest.
@AceAnimations Жыл бұрын
Very informative 💯
@gegi4577 Жыл бұрын
good video
@affinity3d Жыл бұрын
Do you have a video explaining this process? I’m very interested and your short is very concise
@Feierabend22 Жыл бұрын
he just did... pull up a knife with "k", then cut it and move the part in the front upwards and adjust or bevel some edges
@unknownguy6686 Жыл бұрын
@@Feierabend22you’re forgetting the whole subdivision modifier applied to the mesh that allows it to be smooth like that. OP wants to know how to do that, not just what’s on the short.
@MagodosFrames Жыл бұрын
@@unknownguy6686 Yep, he's forgeting about topology
@Riflyre6 күн бұрын
Thank you
@jumpy2783 Жыл бұрын
This man is a topology wizard 🧌
@HappyGaminz Жыл бұрын
That is a troll emoji.
@jumpy2783 Жыл бұрын
@@HappyGaminz I didn’t mean to call a troll a Wizard
@leifdux72776 ай бұрын
my in-built one does it ever since its origin 😊
@ollicron739725 күн бұрын
Not half bad chap!
@Viraltubs11 ай бұрын
amazing bro!
@blendermanstudio Жыл бұрын
Thats amazing ❤
@laserr1000000011 ай бұрын
love the texture
@Denomote9 ай бұрын
there's no texture lol
@AbyssalSoda Жыл бұрын
I'd probs just use a lattice or mesh warp, origin I used on occasion when doing quick overhangs. Or realigning stubborn verts.
@hitlex5639 Жыл бұрын
great
@captainofnumenor822111 ай бұрын
Awesome!!!
@neio589 Жыл бұрын
Sooo smooth
@ZainJustChillin Жыл бұрын
I just use lattices
@babelette Жыл бұрын
That's so cool. I'm a beginner so this is my first time seeing using 3D crusor like this. Most courses don't focus on this. However, I feel like you could've easily done a loop cut here. Any reason you did a knife cut?
@thatonegamer9860 Жыл бұрын
A lot of times with more complicated geometry, like the indented surface of the object in the video, I find that loop cuts are not often perfectly straight because the loop bends to fit the geometry next to it. A knife cut in the Z axis was the easiest way to get a perfectly straight cut in this situation. Hope this helps!
@eingooglenutzer4125 Жыл бұрын
Nice Cockpit from Huracan. Respect!
@Darcy_stabler Жыл бұрын
I was expecting a curve but that works too, probably better
@omnomgamer8633 Жыл бұрын
Ok so beginner here. What are you using to smooth the big polygons into nice curves?
@thatonegamer9860 Жыл бұрын
The most basic way to do it is shading the object smooth and using the subdivision surface modifier👍
@FRANCOPROHOLA11 ай бұрын
subdivision surface modifier
@spacepotato251610 ай бұрын
@FRANCOPROHOLA this is wrong and evil
@Luluskuy8 ай бұрын
@@spacepotato2516what? It's not? What do mean by that??
@squishybluecat3 ай бұрын
@@spacepotato2516 What? Are you stupid?
@renspeene Жыл бұрын
Great tips
@wall_game45779 ай бұрын
Simple deform, curve modification no. Add more polygon, yes
@TheLofren Жыл бұрын
Larrice or simple deform are your friends Also no need to change the 3d cursor just select from active origin
@jony466 Жыл бұрын
In some cases you need to change the 3d cursor cuz the origing might not be where you want to
@AdolfHitler-lk4vo Жыл бұрын
simple deform is garbage
@lazypotato3707 Жыл бұрын
@@AdolfHitler-lk4voBarely any of the tools in blender is garbage, you're just garbage at using them.
@lightdark4340 Жыл бұрын
@@AdolfHitler-lk4vo I throw you in the bin every time.
@MondyTS Жыл бұрын
When you select the psrt to bend if you use active origin this will not work
@IrakliGogava Жыл бұрын
you could use deform modifier without changing the base shape..
@dwsg1990 Жыл бұрын
That gives me master chief cryo chamber vibes for some reason
@UltraTagProductions7 ай бұрын
This works, if the object has a subsurf modifier
@gamewavelondon11 ай бұрын
cool
@blacklotus43211 ай бұрын
Nice
@aiperthatgotmutatedbytruth563811 ай бұрын
Can you release a tutorial on how can i shade and give lusture so effectively(texturing as well pls)
@Sigmash111 ай бұрын
New sub
@user-hj4op5no6r2 ай бұрын
Hm i didn't know you can chose axis to align cuts Nice
@theGoogol9 ай бұрын
Use "A" for constrain cut
@yunzouwu757 Жыл бұрын
To make it easy and even to cut, clamp Shift
@frosti87876 ай бұрын
hard surface sigma
@elliejohnson2786 Жыл бұрын
Neat trick
@kipchickensout11 ай бұрын
i think shift+w also bends, and there might also be a bend modifier
@hageby123jean111 ай бұрын
What I liked about 3D Max, is that you didn't have to worry much about that, about origin 3D cursor etc Blender, you needed to worry about that. So. Ey. You have my support.
@ArijanRace11 ай бұрын
Thank you my friend. How does it work in 3ds max?
@hageby123jean111 ай бұрын
@@ArijanRace Better, and much more simplier when it comes to bending things or moving things. Was weird to go to Blender and not have the same as 3D Max. BUT! In the end, Blender is victorious for being free source and so many add ons and you don't need to pay license. And so much more what Blender can do now, Its Incredible. So I stand with Blender now 👍
@ghettomining75809 ай бұрын
could also use a curve modifier with an empty as point of reference.
@Denomote9 ай бұрын
takes more time to setup
@N8-Squared11 ай бұрын
If the topology allows it
@auto_addict_0110 ай бұрын
Lamborghini ❤
@Cyanide1578 ай бұрын
How did you make that depression or dent so smoothly, I want a tutorial for that
@gigabytegallery730511 ай бұрын
This is much appreciated, going to try this out on creating a Halo inspired sci-fi project
@root0062 Жыл бұрын
There are so many shortcuts I'm forgetting others for new ones..😅
@BECK_4D Жыл бұрын
There is a point where you forget all the shortcuts but you know them all, and you just start using them naturally without thinking about them, just keep practicing and enjoy the process! :)
@sarcasme-_-6549 Жыл бұрын
He never told u that there is a subdivision modifier....that is also a reason why it is so smooth. But nice vid anyways bro!
@fribiesdi Жыл бұрын
Isn't it fucking obvious when you take a look at the geometry in edit mode???
@topraktunca1829 Жыл бұрын
hmm I think everyone can easily spot there is a subdivision modifier
@sarcasme-_-6549 Жыл бұрын
@@fribiesdi Ok and?
@EmvyBeats Жыл бұрын
did you use a Sub D?
@Sheikh-uddin11 ай бұрын
I need also this 😢😢😢😢 but I don't have enough money sad 😢😢😢
@Babarin Жыл бұрын
DAMN 💯
@arthurwilliam21065 ай бұрын
hey how do you have that shiny surface?
@hamzanawaz4545 Жыл бұрын
phenominal trick
@azzytheangel5494 Жыл бұрын
Wouldn't it be easier to just use a loop cut?
@thatoneracerr532111 ай бұрын
I really want to see the final car.
@MiltonDiasIIID9 ай бұрын
Blender dont have a bend deformer?
@plus2403 Жыл бұрын
What is the name of the track that plays in the background? Very nice one. I'm listening it on repeat.
@hrihori_art Жыл бұрын
kzfaq.info/get/bejne/pNGeltOUxtTQqWQ.html
@rnpk9572 Жыл бұрын
❤
@radicant72836 ай бұрын
This is just basic mesh editing though?
@DisalaShorts7 ай бұрын
What is the gpu
@142vids11 ай бұрын
Shorts are the worst shit the internet created. No favouriting, no adding to album, no fast forwarding.
@dawodjamra583810 ай бұрын
What is the name of this program?
@rajarajanmanoharan11 ай бұрын
Step 1: Have great topology… 😅
@topy70610 ай бұрын
using maya workflow in blender lol nice
@ademedis5565 Жыл бұрын
this which programme
@mrsweetkandy7673 Жыл бұрын
I'm confused, why the knife tool instead of a loop cut? I'm a beginner so idk if there is anything i'm missing, as i feel a loop cut would be faster/easier to use in that context. Is there something i'm not thinking about?
@hanwencao1793 Жыл бұрын
a loop cut in that situation wouldn’t be a perfect circle cut
@Paul_Ward Жыл бұрын
A loop cut would fix points between the two vertices either side of the indices they're being applied to depending on the distance of the indices. So it would be a wonky line. A knife cut will be straight using z, y or x key to bind the cut to that axis.
@Teh_Random_Canadian Жыл бұрын
@@hanwencao1793However you could loop cut then straighten it with Scale > Y > 0
@hanwencao1793 Жыл бұрын
@@Teh_Random_Canadian i never knew that, thx!
@h10hunter Жыл бұрын
Also, after loop cut, if you open the panel that pops up you can select how straight it is 😊
@tudoriftimia527411 ай бұрын
What is the programm?
@auto_addict_0110 ай бұрын
Lamborghini Interior 🤔🤔🤔🤔🤔
@bluttur9519 Жыл бұрын
Hey Arijan It’s Darowebros/Nrrvideo, I’m just on a separate account. I was scrolling normally and saw this dude. Keep up the good work!
@joseenriquejoson19944 ай бұрын
Name of music?
@Bartokz Жыл бұрын
what is the best addon for hard surface modellimg?
@joseruano539 Жыл бұрын
Box cutter and HardOps, I think both are great for that
@jostasizzi818 Жыл бұрын
What is the song
@plus2403 Жыл бұрын
Aamol Acharya - Mafia
@jostasizzi81811 ай бұрын
@@plus2403thanks
@boxodoge9780 Жыл бұрын
why did i think that was a phone case
@frogybot Жыл бұрын
what u makin?
@MAXGAMINGYT265 Жыл бұрын
Without 3d cursor, Maya, Max,.. be😢😢
@FelixS0886 ай бұрын
You proved me wrong 3D cursor is not useless sh*t
@KG_BM Жыл бұрын
Hooooly shit
@passion_proh-jects9 ай бұрын
Depressingly good... not the bend, obviously. Anyone can bend...
@AviYanK_77011 ай бұрын
Cinema 4D - Bend Deformer🗿
@MrBrigadierArchived Жыл бұрын
If anyone want to do this not only with Subd model, you still can use Proportional Editing Tool (righter from magnet icon above) and Lattice. The result will be the same.
@hyperunboxing930410 ай бұрын
I thought it was Autodesk maya😐
@obsleet Жыл бұрын
I thought it was going to be some trick. And then dude just used blender's basic modeling functions. lol.
@superduper79116 ай бұрын
Rhino is so much better at this
@Igrabbedcactus9 ай бұрын
Too complicated, ill just give up
@ilikeminecraft20202 ай бұрын
Ambitsj
@The_Founder16 Жыл бұрын
Ever heard of simple deform?
@user-gj4zt1be3l7 ай бұрын
genius with Subdivision...fake tutor.
@ArijanRace6 ай бұрын
Shut up fool
@pyro_029 ай бұрын
We are in 2023 and this programs can’t bend a piece by using an AI and just letting you choose your desired degree angle an the point where it bends
@consilx2985 Жыл бұрын
просто сделать CRTL R ??????? Я для тебя шутка какая то ?
@THETALETSPLAY Жыл бұрын
Don't understand. Why mesh bend smooth? You create hard line. Bad video :/
@ArijanRace Жыл бұрын
It's smooth because of subdivision surface. Just because you don't understand something doesn't mean it's bad.
@THETALETSPLAY Жыл бұрын
@@ArijanRace Then you showed what is so obvious. I would show you how to enable subdivs so that it would be so smooth - then ok.
@comradeboris2335 Жыл бұрын
I mean there might be better ways to do this but that depends on your workflow, thats the whole point of blender and 3d modeling in general. You find the way that fits your workflow the best. From what i see the method arijan used works well enough for the purpose he needs it for
@THETALETSPLAY Жыл бұрын
@@comradeboris2335 I mean he didn't show How to do it, he showed what it looks like. It's like calling a video "how to make a ball soft", but in the video itself, squeezing the ball with hands and saying "look, it's soft". Question How is not disclosed.
@comradeboris2335 Жыл бұрын
@@THETALETSPLAY you cant be serious? Did you just watch the first 5 seconds? If youre looking for an indepth tutorial on how to do this then a short is probably not the best place to do so
@Chelogovrik Жыл бұрын
Bro💀 don't use blender again
@ArijanRace Жыл бұрын
Look in the mirror my friend
@Teh_Random_Canadian Жыл бұрын
Why are you guys commenting this crap? Don't like his technique then don't watch. There is enough toxicity out there, don't add to it.