Easy Install for Side Step Lights

Рет қаралды 13,174

Жыл бұрын

These lights were installed on my 2021 Silverado. Here is a quick overview (but the best way) of how I installed led strip lights on my Magnum RT lights. It is not the most detailed video ever, but it gets the main points across. This was a pretty simple install that most people could do themselves.

Пікірлер: 26

@605LIFE Жыл бұрын

Those LEDs are rad!!

@andrewhassell8982 Жыл бұрын

instructions unclear, I now have jelly all over my ceiling fan . . . .

@ordinary_arkansan Жыл бұрын

😆 get to work!

@shondunn Жыл бұрын

Hey I need some help I have a 2022 Gmc 1500 Denali. Brought some Led lights to add to my running board. I tied them into the door sill lights. Every time the lights come on they flicker and then come on. When they go off the flicker then off. What can I do to get full power to the running board lights. I know the dome lights has a dimmer on them. Thanks

@ordinary_arkansan Жыл бұрын

Did you go through the BCM like I did? Mine will sometimes flicker if my truck is off, but other than that they never flicker. What kind of LED lights are they? You may need to get some that don't require as much power, maybe?

@tieuhoc321 2 ай бұрын

I have 2024 gmc sierra 1500 densli. Try hook up step light. I don’t know with wires to hook up? Did you know with bcm or elm? Please help

@ordinary_arkansan 2 ай бұрын

Sorry. I'm sure the 2024 is different. I'm not sure what it would be on those. I'm sure you can find a diagram online.

@Joshua3131cc Жыл бұрын

Do the lights come on when you hit the lock and/or the unlock button on the key?

@ordinary_arkansan Жыл бұрын

They come on with the unlock and fade off with lock.

@franciscotorres8667 Ай бұрын

Hi quick question. So the positive cable goes to the gray cable and negative to battery negative?? Thank you

@ordinary_arkansan Ай бұрын

Correct.

@franciscotorres8667 Ай бұрын

Thanks you!!!! @@ordinary_arkansan

@tailai168 Жыл бұрын

Hi : I Bought a running boat For My 2019 Toyota Rav4 blue wire I connect to Door light (domes Light ) White wire I connect to fuel Box running signal Red wire I connect to Turn signal Black wire I connect to Ground But only work for turns single When I opened the door They don't have light come out Can you tell me what's wrong Thanks

@ordinary_arkansan Жыл бұрын

Hey, I'm sorry, I can't really help with this. I'm not familiar with the Toyotas.

@raymtz4016 Жыл бұрын

How did you know what BCM and pin connector to go with? Do you have a diagram?

@ordinary_arkansan Жыл бұрын

There's a few links to diagrams in the comments.

@raymtz4016 Жыл бұрын

@@ordinary_arkansan Gotcha, yeah I found them in a previous video, not in this current one. Thanks

@brianperry3215 3 ай бұрын

Do you know if the articulating running boards are connected to the BCM by chance?

@markmanning5683 Жыл бұрын

Why would you leave wiring on the underneath of the truck? Maybe run the wires from inside the passenger compartment thru the grommets for each step area. Run all you wiring along in Wire channel inside the truck. Nothing to see that way.

@ordinary_arkansan Жыл бұрын

The way these lights are setup, there's no way there's enough wire to do that. Besides, if you get underneath my truck no wires are exposed or seen. I've ran them high and tight and inside conduit.