Installation | LEDGlow Running Board Lights for Trucks

Рет қаралды 162,650

Күн бұрын

Learn how to install LEDGlow LED Running Board Lights for Trucks that deliver ultra-bright LED lighting and can be added to virtually any mid-size or full-size pickup.
Get Your Truck Running Board Lights Here: www.ledunderbody.com/2pc-ambe...
LIGHTED RUNNING BOARDS FOR TRUCKS
LEDGlow 2pc Side Marker & Courtesy LED Lighting Kits will make your truck stand out on the road and deliver added safety at the same time. Alert other drivers by illuminating the running boards with ultra-bright amber LEDs. These truck running board LED lights also have a Courtesy Lights feature that switches the lighting to solid white any time the doors are opened or when the dome light is activated.
TRUCK RUNNING BOARDS WITH LIGHTS
This flexible Side Marker & Courtesy Light Kit is offered in 2 different size options: 55” strips for straight cab trucks that feature 135 SMD LEDs per strip and 70” strips for extended cab/crew cab trucks that feature 180 SMD LEDs per strip. The side marker light strip features a waterproof design that mounts to the bottom of the truck or behind the running board using the included 3M™ tape and mounting brackets for a safe and secure fit that will last in all weather conditions.
TRUCK RUNNING BOARD LIGHTS INSTALLATION
Each kit includes installation instructions, 9’ of power wire per strip with a 2 amp inline fuse, 3M™ tape, mounting brackets, screws, butt splice connectors and zip ties for a complete installation. If you install your kit differently or have any tips, let us know by posting in the comments below. You can also contact us via email, social media, or through www.ledunderbody.com. Before getting started, make sure you have all of the tools needed for installation and let’s get to work!
View our entire product lineup at www.ledglow.com/
CONNECT ON SOCIAL:
/ ledglow
/ ledglow
/ ledglow
#LEDGlow
WARNING: This demonstration is meant to be a guideline. All vehicles are different and professional assistance is highly recommended for installing any lighting kits. As with all of our products, we recommend testing the kit before beginning the install process.

Пікірлер: 137

@roballen5670 2 жыл бұрын

Well I must say LEDGLOW Made a great install video. F150LEDS Video Freaking S#+KS. Thank you LEDGLOW.

@kennethreynolds5605 5 жыл бұрын

Great....For others with a 2016 Chevy Silverado, under the drivers side use the black box (4th from the left) where you connected your courtesy lights in the grey box. Find the yellow wire in the black box and use it to operate your running lights. Y our automatic light control will have to be turned off for the amber running lights to work though. Still looks GREAT!!!!!

@marcogonzalez9207 Жыл бұрын

Thanks for the guide I’d watched this video so many time but I couldn’t find the wires but after reading your comment help a lot thank you

@stevenpires 3 жыл бұрын

It could be like, courtesy lights and the amber light could be the turn signal.

@Chchchchchivo 4 жыл бұрын

I was thinking could we use a fuse tap wire? On the interior lights? I’d get two sets one for the step like video shows and another under the step for no shadow of step. I fear the one under the step my be to exposed to the elements and road..

@markmanning5683 Жыл бұрын

You're installation process is CRAZY, running electrical wiring under the belly of the truck like that and then run against body components. Run your wiring on the inside and then down thru a grommet found or make your own hole. Wiring outside will short and break in Mud or Snow.

@MrNelson305 8 ай бұрын

I need an installation video for a tacoma.

@rocxylemmon8535 2 жыл бұрын

2008 F150 Passenger Blinker wire is White with light blue race stripe and Driver side is Drk. Green With White Stripe/ both sides have black with Light blue stripe for the puddle lights, you will need to test for 12 Volts on one of them, then you can use any solid black wire for ground. (Side Note) I had to remove the door covers and splice in to the wire at the connector and run my own wire down to the junction wires in the floor board due to multiple wires with same colors for some odd reason, I could not find the correct wire. The lights really do blink amber with the turn signals at the correct blinking rate, looks really cool. Just to much work then should be done to find the correct wires is my only conn but hey, in the end I got it and saved me the price of a pro install when I can do it myself.

@user-jm5gk5wc5q 5 ай бұрын

Where do I get a third generation 1500 ram wiring diagram for this installation and is there a plug and play option ?

@joseduranjr4963 2 жыл бұрын

Where and which wires do I tap into on my 2017 GMC Sierra DENALI truck for these lights?? Please help

@beyedup 3 жыл бұрын

Do the Ram 1500's have the same wiring setup in the passenger side of the cabin?

@carsonmurphy5604 5 ай бұрын

Is there a way to wire them to have white with headlights and have the turning signal and how. Tried to use the courtesy for the white running light and it acts up with blinker

@jasonrobinson1909 Жыл бұрын

Need help finding dome light wire color for a 2016 ram 1500.

@nathanielfair5633 2 жыл бұрын

Ok what is that spade connector setup i cant find it anywhere

@kennethreynolds5605 5 жыл бұрын

Just installed mine. However, which wire do I tap into for the amber Running Lights on 2016 Chevy Silverado? Already tapped into the dome lights on the drivers side for the courtesy lights. Great Product!!!

@ledglow 5 жыл бұрын

You will need to locate a 12v headlight wire.

@fifty81ify 6 жыл бұрын

What color wires for a 2005 navigator

@alexvelazquez4644 Жыл бұрын

How to connect this lights in a toyota tundra 2005

@keyboard101101 4 жыл бұрын

Could these be used as chicken lights or sleeper lights for a semi? Can anyone make a video of that idea?

@bigdaddysshop8180 3 жыл бұрын

Yes, as long as you are putting them on a Freightliner, Volvo or International.

@billpeirce7127 2 жыл бұрын

Do they hv red and white ones? Or jst red?

@martinrussell3353 Жыл бұрын

Are these legal in UK? As I have some installed on my car

@rehaerman6519 3 жыл бұрын

That is SO COOL! I WANNA GET THESE LIGHTS FOR MY 2013 TACOMA TRD 4X4! Do you the lifespan of these lights? Once they go out, is it easy to replace them? Thanks in advance! Thx.

@ledglow 3 жыл бұрын

Each application is different but many LEDs have a rated life of up to 50,000 hours.

@Porroquio 4 жыл бұрын

How did you manage to make that fade in / fade out effect when powering on and off the led strip.

@ledglow 4 жыл бұрын

It's not an effect. That's what the light does when you close the door.

@Porroquio 4 жыл бұрын

Yes, maybe I was wrong calling it "effect". I'll reformulate the question: what's making the led strip behave like that? Is it because it's spliced to the dome lights and they have that behavior? Or is it because the led strip comes with an additional circuit that makes it fade in and out? Thanks!

@ledglow 4 жыл бұрын

Yes, the kit is wired to the dome light so it basically mimics the how that works.

@eddiem4638 2 жыл бұрын

@@Porroquio The fade in/out is from a grounding circuit that either rises the voltage to 12v or pulls the 12v back to 0v.

@brucecollins2845 5 жыл бұрын

when will you have a product that will function as a turn & running amber light with the courtesy light function?

@ledglow 5 жыл бұрын

Soon!

@SM0R3S 4 жыл бұрын

@@ledglow That's not soon enough!

@dtg6162 Жыл бұрын

Can you keep them wired the same way showed in the video and make some changes to make them be on with lights but also blink or is there a different model for those

@ledglow Жыл бұрын

Right now it is one or the other.

@JohnDoe-pp4tm 3 жыл бұрын

I like the white courtesy light and the yellow for the blinker, but I don't like the yellow staying on while driving. Is there a way to wire it so the yellow won't stay on but will work with the blinker? Or is there another product that I should be looking at. It's for a 2021 white suburban and I don't think the constant yellow will look good on it.

@ledglow 3 жыл бұрын

Connect the orange wires to your turn signal power wires instead of the headlight wire. Then they will light up orange when the turn signals are on.

@big_prev 4 жыл бұрын

Any info on wiring this to a 2003 Ram as a courtesy light and turn signal? Can’t find info anywhere

@erwinkuehneiii5282 3 жыл бұрын

I couldn’t find any info aswell, I just ran the “running lights” into my trailer turn signal harness, and for the courtesy light, I used 2 relays, one from the cabin lighting and the other from the bed lights, as when you unlock the truck via remote, it will engage the lights aswell

@jordanboetcher3628 6 жыл бұрын

How would you recommend to install these without access to a lift? Can I run the drivers side wire up through the engine compartment to the passenger side and then pass through the firewall into the truck?

@ledglow 6 жыл бұрын

Yes, the use of the lift for this video was only to make installation easier. It is not mandatory to use a lift.

@dannytmayo 2 жыл бұрын

I added these to my 2021 Ford F-250. The courtesy light work great. The amber lights flicker when I turn on my running lights. What can I do to stop them from flickering?

@ledglow 2 жыл бұрын

Double check the wiring to. make sure nothing is loose and verify that you are connected to a 12-volt source.

@lrs333 3 жыл бұрын

What are the tools used in this video specifically to crimp and slicing tools

@lrs333 3 жыл бұрын

Is it a KlienTools Brand?

@johnmock5825 2 жыл бұрын

Can you make them blink with the blinker wires like driver side to driver side turn signal and passenger to passenger side turn signal

@ledglow 2 жыл бұрын

Yes, you just need to wire them that way.

@timrandall4659 3 жыл бұрын

What wire is it on a 2018 F150 Supercab for the dome lights / interior lights?

@earlyblackmz 2 жыл бұрын

Did you ever find out which wire it is? I have a 2018 also

@keithhathorn3593 10 ай бұрын

I too would love to know the answer to this haha

@troylinden369 3 жыл бұрын

Pretty vague, don't run wires over metal edges. Cut a slit in your grommet and push the wires through it. Consult your wiring diagram to make sure you are tapping into the correct wires.

@phillipsmith3353 4 жыл бұрын

Could i wire them to ONLY be yellow when turning? I want them to run as white like the headlights

@ledglow 4 жыл бұрын

Yes you can.

@Indifference2000 2 жыл бұрын

So does this light comes on when the headlights are on? I'm trying to wire it to where it comes on when I press my unlock door button on my key fob and when I open the door. Not on while I'm driving

@ledglow 2 жыл бұрын

The lights coming on are dependent on what power source you connect them too. If you connect them to a headlight wire, then they will come on when the headlights are turned on. If you want them to come on when the door is opened/key fab pressed then connect them to an interior dome light wire. We usually recommend connecting to power via the fuse box.

@jgriffinsc Жыл бұрын

Would it be possible to just run these to a trailer light plug and plug into the port at the rear of the truck?

@ledglow Жыл бұрын

As long as it is 12-volts, yes.

@wayneovmax9638 4 жыл бұрын

Why do these lights work fine just off battery power? Soon as engines running I loose marker lights on strip and the turn signal skips almost hyper flashes on the light strip. Truck is a 2019 F-250. Thanks

@ledglow 4 жыл бұрын

Please double check your connections.

@teampps9016 4 жыл бұрын

Having the same.issue on a 2020 f550

@skumgadden 3 жыл бұрын

It is because of the canbus system I guess you have. There will be wrong resistance in the circuit and make the car think some bulb is broke even if it isn't.

@eddiem4638 2 жыл бұрын

Daniel is right. You will need to add these lights via relays, and or straight off of your battery terminals. Anything downstream from your trucks ECU is going to throw an internal code, resulting in your lights not working.

@timbales3652 3 жыл бұрын

Nope! Not cutting my factory wiring.Use a add a fuse setup. Clean,no splicing or cutting.

@jeffreywallner2644 8 ай бұрын

Were do i purchase a terminal connector?. Cant find them anywhere

@ledglow 8 ай бұрын

Amazon, PepBoys, Autozone, Advanced Auto

@gamingwithskittles4813 5 жыл бұрын

What colour wire for dome on a 2000 Nissan pathfinder anyone know would be a great help as I'm only getting a constant white on

@joejones6968 5 жыл бұрын

Pink.

@timschutte8310 5 жыл бұрын

GAMINGWITHSKITTLES , just buy a ten dollar 12 volt simple light tester, to find hot wires. has an alligator ground clip. very simple to use, a 6 year old kid could use it. light on, 12 volt. light off, NO POWER

@littlemopete931 6 жыл бұрын

Will it work if wired only as a courtesy light? Or do both have to be wired in to work? I’d like to have these but only as a courtesy light don’t really want the running light.

@ledglow 6 жыл бұрын

Yes - you can simply use this kit as a courtesy light.

@littlemopete931 6 жыл бұрын

LEDGlow thanks!

@gsptrainer1 5 жыл бұрын

can you use amber light for both running lights and courtesy light?

@ledglow 5 жыл бұрын

This kit can only be installed one way or the other.

@jadz684z 5 жыл бұрын

I dont see why not with some diodes and you should be good to go

@peterdragon6367 4 жыл бұрын

Not sure how long these would stay on up north

@sboody21 3 жыл бұрын

I just ordered them and live in central MN, time will tell

@Axis.Mundis. 4 жыл бұрын

Can I use this kit to work with my turn signals instead of markers and a red for brake when pressed

@ledglow 4 жыл бұрын

Yes, you can use it to work with your turn signals however this kit does not light up red. Only white and amber.

@edgarh252 4 жыл бұрын

Don’t think you could legally drive with red on the side of your vehicle.

@rotty872 3 жыл бұрын

@@ledglow how do i make the them turn into turn signals?

@wm005 11 ай бұрын

Is the wiring the same for all vehicles, like a Toyota Tundra 2022

@ledglow 11 ай бұрын

The way the lights need to be wired is the same for every vehicle but the exact wires you need to connect to on the vehicle itself might be different.

@jeremykirk9641 4 жыл бұрын

Can i use them as just courtesy lights. Dont want amber marker lights at all

@ledglow 4 жыл бұрын

Yes, you can do one or the other.

@McCain101 2 жыл бұрын

Bit of an odd question but can this be used to just use the side marker? From the wiring set up I know I could tap into a headlight/tail light but I wonder if that alone would be enough voltage to turn on the led strip.

@ledglow 2 жыл бұрын

Yes, technically you can connect them however you like.

@ericgarcia5176 3 жыл бұрын

How can you connect them or make them work on a 2007 honda element?

@ledglow 3 жыл бұрын

We install them on a truck for the purpose of this video but these lights can be installed on any vehicle in the same way.

@BIGsteve8823 2 жыл бұрын

I did that and when I started my engine up the lights went crazy. They worked fine till the engine starts. I’m confused

@ledglow 2 жыл бұрын

Double check that you connected them to 12-volt power wire.

@BIGsteve8823 2 жыл бұрын

@@ledglow I hooked the up to the parking light for side lights and turn signal for them to blink. I attached the ground to the chassis and they worked great but like I said once I started the engine they went nuts. I installed them on a 2018 f-150. I might turn them around and try wires to rear trailer plug.

@DJ-hl8mg Жыл бұрын

Can you hook it up to your turn signal lights?

@ledglow Жыл бұрын

Yes.

@TEXAZPITBULL 4 жыл бұрын

Can I connect this to my signal light. So it will blink with it

@ledglow 4 жыл бұрын

Yes, but keep in mind that the light will only turn on when the turn signal is on.

@acessford101 4 жыл бұрын

@@ledglow is there an easy location to access the left and right blinkers wiring to use them as blinkers!

@Chchchchchivo 4 жыл бұрын

Adam Cessford the turn signal themselves. Ether front or back, mirrors if your car has. Tap in to the wires.

@erwinkuehneiii5282 3 жыл бұрын

I do believe that you can connect it to a trailer harness, and operate them as trailer lights so they can be running lights, and then signals

@davidmichaud2456 5 жыл бұрын

How do I hook up both running light and turn signal

@ledglow 5 жыл бұрын

At the moment you can only hook up one or the other.

@osycastanon2980 5 жыл бұрын

You can connect them to your day running light and turn signal, it’s easier, and you don’t have to run your wires under the truck ,

@tylerhunt7961 3 жыл бұрын

Osy Castanon how exactly do you do this? Thanks in advance

@ericlord3375 3 жыл бұрын

Would it work in a 1998 Dodge Ram 1500?

@ledglow 3 жыл бұрын

Yes.

@rosshart7709 5 жыл бұрын

Where do i put the inline fuse at

@ledglow 5 жыл бұрын

The inline fuse will come pre-attached. No need to move it.

@georgewashington938 3 жыл бұрын

the inline fuse should go inline

@sisk80 3 жыл бұрын

Why does my ground wire have a fuse attached?

@ledglow 3 жыл бұрын

When there is a short, the ground becomes the return path and can be damaged as well. If a fuse is there it will blow before there is any damage.

@darkside5225 6 жыл бұрын

What gauge t taps needed to tap into wires?

@ledglow 6 жыл бұрын

The kit comes with the connectors you will need for installation.

@patriottowing4973 4 жыл бұрын

@@ledglow my came with shitty butt connectors not even heat shrink ...and the screws aren't even self tap....🤦‍♂️🤦‍♂️

@democrat69 3 жыл бұрын

How do I install this on a Toyota Tacoma

@larrygonzales7410 3 жыл бұрын

The same exact way

@joseamador1539 6 жыл бұрын

Can it be installed on a tractor?

@ledglow 6 жыл бұрын

Yes, as long as you've got access to 12v power and a place to put them!

@nikotzevelekos700 Жыл бұрын

Does anyone know if these come on immediately when unlocked?

@ledglow Жыл бұрын

Depends on how you power the kit.

@doubler2482 5 жыл бұрын

Is this legal in California?

@ledglow 5 жыл бұрын

Please confirm with your local police department.

@chipps_340i 6 жыл бұрын

What if I do this to my car...?

@ledglow 6 жыл бұрын

Although we feature this kit on trucks, it can also be used for cars.

@georgewashington938 3 жыл бұрын

then it will be installed on your car

@acessford101 4 жыл бұрын

2019 F150, is there an easy way to attach the blinkers instead of running lamps?

@edgarh252 4 жыл бұрын

To the headlights.

@Chchchchchivo 4 жыл бұрын

The turn signal it self.

@robertrozela2699 3 жыл бұрын

1 for a g.mc

@sasnetro 6 жыл бұрын

3M adhesive without screw = will fall from rain and snow in maximum 1-2 month!!!

@ledglow 6 жыл бұрын

We've tested this product for over a year on daily driven trucks and have yet to see any fall off. The kit also comes with brackets as an additional mounting option.

@jerryjohnson5535 6 жыл бұрын

LED GLOW, I have had these on my truck for about 5 months, I opted for not using the screws, but did find using Clear rvt silicone gives it an extra Bond and also keeps a hundred percent Clarity and I just rub a light amount across the whole thing specially on the edge of this to keep it tight just my experience only cuz I had the end start peeling away. ( Witch I'm sure was my fault from the prep most fails are from a bad prep job) having said that I love mine. Courtesy lights look awesome in the winter ( CNY). Also I tied my Amber lights into my turn signal. Installation was as easy as shown on video. I would suggest doing another video that shows how to wire it in using an accessory relay for people that have a ground side vehicle's

@ledglow 6 жыл бұрын

Thank you for your positive feedback! We're are glad that you are enjoying the lights.

@lifted9821 5 жыл бұрын

3m holds just fine as long as you prep the surface properly no screws needed have lights on my truck 5 years no sign of falling off

@timschutte8310 5 жыл бұрын

SasNet Romania , not the red extream double sided 3-M tape, no way !!!!!!! I've had window rain vents on my truck for a decade with 3-M red double tape with NO ISSUES !!!!!!! Your WRONG

@gemmrk Жыл бұрын

This will never last in a hot state like Arizona where it gets 120f outside probably 150f on metal. This is bullcrap. Only hard plastic and screws will work. I call bull on this

@ledglow Жыл бұрын

The kit comes with mounting brackets and screws.