Easy Kill Switch install for Moped, Dirt Bikes and everything else

No video

Easy Kill Switch install for Moped, Dirt Bikes and everything else

Рет қаралды 30,127

2 жыл бұрын

It's so easy to install a Kill Switch. It's just two wires. I think anyone can do it. They are important so you can easily and effectively shot off your engine. If you need to shut it off instantly, you dont have time to fiddle with the choke or pull the plug boot.
Here are a couple of kill switches that I like.
Simple Kill Switch - amzn.to/35NcRRK
Rocker Button Kill Switch - amzn.to/3MhwJNA
Attaches to Dirt Bike perch - amzn.to/3CmfSoj
#Dirtbikes #KillSwitch #Mopeds
My Gear Links
Main Camera amzn.to/3qw1Cnt
Main Lens amzn.to/3qsSOPf
Wide Lens amzn.to/3pwmOdQ
Portrait lens amzn.to/32ooNbv
Mic amzn.to/3HgkBch
Light amzn.to/3qw2SXJ
360 Camera amzn.to/3euCkjV
Selfie stick amzn.to/3pxJGJK

Пікірлер: 37

@frankentrooper 2 жыл бұрын

Not sure if I've said this before, but you should have a million subs. Your tutorials are always informative and perfectly explained.

@Corn-ped 2 жыл бұрын

Thank you! In getting there

@Spag366 Жыл бұрын

I would say the exact same thing

@Corn-ped Жыл бұрын

Thank you!

@joeshmoe8427 2 жыл бұрын

I have been riding around without a kill switch for almost a year now and I finally cared enough to try and fix it . Tried to follow the stock wiring but something is fucked up somewhere and this trick seemed to be the only thing that worked. So thx for the vid. Very well explained

@Corn-ped 2 жыл бұрын

heck yeah! I am glad I could help.

@seandaugherty8796 2 жыл бұрын

Hey man, love watching your videos. They're all so detailed and informative. Do you have a link to the video where you reference the pigtail wiring you did?

@simoncrouch1541 Жыл бұрын

you gained another subscriber. straight forward. thankyou. long live the pigtails.....

@Corn-ped Жыл бұрын

Thank you!

@jaydelaney2131 4 ай бұрын

Thanks for making that so simple, jeez!

@Corn-ped 4 ай бұрын

Yeah man! thanks for watching.

@waynekerrgoodstyle 2 жыл бұрын

A nice , straightforward tutorial.

@Corn-ped 2 жыл бұрын

Thanks Wayne

@waynekerrgoodstyle 2 жыл бұрын

@@Corn-ped No problem. I can see you put a lot of thought into the video.

@chadtufts6320 2 жыл бұрын

I've been doing the cheap on/off switches and of course its on when off. I figure its something to keep people confused if they want to steal a bike. :)

@Corn-ped 2 жыл бұрын

Haha. Perfect

@bjf10 2 жыл бұрын

I really like the polini kill switches that DOS sells.

@bjf10 2 жыл бұрын

And yeah, kill switches are super easy! Every bike should have one.

@Corn-ped 2 жыл бұрын

Ill have to check that one out!

@bjf10 2 жыл бұрын

@@Corn-ped it's out of stock at the moment (at DOS at least), and it's more expensive, but it's so nice. Just the usual polini high quality everything.

@Corn-ped 2 жыл бұрын

I have that same style on my JR80

@charliedee9276 2 жыл бұрын

So if I had 2 stators (single fire Harley) I would have to ground both?

@Corn-ped 2 жыл бұрын

yeah, is there are two coils you will need to ground them both.

@Greybuiltracing Жыл бұрын

Awesome ! Ty . Other vids are stupid af !!

@Corn-ped Жыл бұрын

Rad! Good luck!

@TeChNoSiX 2 жыл бұрын

I can't seem to get this to work, my coil is 6v points, does that have anything to do with it? I pigtailed my blackwire from coil and the other wire to ground. My headlight is a puch maxi headlight with a killswitch already, i just need to install an on/off switch with a key for theft deterrent.

@Corn-ped 2 жыл бұрын

voltage doesnt matter. Just use the kill switch to ground out the external coil. That will kill the motor. If its not, you either have the wrong wires or the switch is broken. Do you have a multimeter you can check it with?

@TeChNoSiX 2 жыл бұрын

@@Corn-ped Holy fk you answered! I got the puch maxi headlight with with 4 wires going to it, yellow, black, grey and brown for ground. Ill have to test the switch with a multimeter because it seems as if it works on and off. Is it a correct assumption to say that its impossible to "killswitch" on a engine with pullstart? Or should it still be possible to ground the entire engine with a pullstarter? thanks for being an encyclopedia of all the things i care about

@Corn-ped 2 жыл бұрын

@@TeChNoSiX you totally can kill it. Just ground out the ignition coil. The blue wire that goes to the coil. Ground thay

@TeChNoSiX 2 жыл бұрын

@@Corn-ped Thanks for answering so fast! In my case thats the black. But my earlier question was more of a "can an engine with pullstart have a killswitch with an on/off position so that it cannot start in off position no matter how much you pull"

@Corn-ped 2 жыл бұрын

Ohh yeah if the coil is grounded, it cannot start. No matter how hard ya pull