Simple thing, and such a deterrent for thieves, got my 2019 duke 390 stolen… Retrieved it( tracker ), got it all patched up and had someone rip the cover off again today, im installing it now

in 2018 I moved from house to appartment with no place to safely store my bike. Didn't ride since then. The bike is my 1st bike ever, it is also a memento to a close friend who taught me to ride, found it for me, and sadly took his life in 2021. I would never get over losing it.

Zane - thanks for the video. Would be great to get the specs of the parts you got from the shop (ie. Wiring gauge, switch capacity, etc). Thanks again!

When my key Ignition failed I bypassed it using a switch like you used here. I still put the key in the Ignition for show but it is not needed to start the bike and go. Also unless you know where the switch is you can never get the bike to start.

Some news if the fuse blows the bike can run 2 ways really bypass it or hotwire bike and push start it will not start on button but will start even if you have the key and fuse blows still can push start the fuse is just a safety so it dont blow the loom but even you putting that on the other side of the fuse problem is can start by crossing the starter but if you stick it on the coil then they will not start the bike hence why immobiliser is through the the coil and you can put on starter efi cdi list can go on the more the better but as anyone know the more you do the more can go wrong but other than that not a bad video

Hi buddy can you please tell me how I can do this on my motorbike please I have a 2019 ninja 650. I want a hidden kill switch

can i put switch to starter motor rather than battery? because battery needs to be there for gps tracker

Did you just cut the 12volta supply by putting switch on it?? If that so, then this is useless, because motor cycle can start without battery , just use kick starter, your connection will work only for the push start which required 12volts..