I've gotten some folks concerned that I did not mention this so here it is: DO NOT USE THIS METHOD TO EXTRACT GASOLINE. An explosion can/will occur.

KNEW it was a easier way than pumping this TopLoader 40 freakin times, was trying to figure out HOW to hook the shop Vac up to it since I already have the TL, thanks, wish I had of seen this first ! I just got to hook up the sucker to where the not pump handle is

This is awesome. Cost me five bucks and about 10 mins to put it together and worked like a charm. Changed oil in both mowers in a few minutes and more importantly didn't spill a drop of oil. Thanks LCN!

Works great for someone like me who has muscular dystrophy and can't manhandle a lawnmower or a manual pump very well. I got my local sandwich shop to give me an empty 1 gallon jar that their jalapenos come in but convenience stores that sell pickles also have them and are happy to keep them out of the landfill. I also am not a pop user so I got my 2 litter bottle from my neighbor's recycle bin. I skipped the hose in a hose idea and only bought the 3/8 hose. After using this setup I opened the drain on the engine (riding mower) and not a drop was left. It's the least messy of all the oil changes I've ever seen. Thanks for the help.

I am from Quebec and I just tried it, really worked well, I won’t have to tilt the mower over in order to change the oil, thanks a lot for this really nice tool. I too was sceptical of this but wow.

Used this method this morning with a similar glass jar and metal screw top lid. Worked a charm. No more tipping the mower over for me. Many thanks.

Lawn Care Nut needs to get in touch with Obsessed Garage and help the guy out.

made mine last week. Changing the oil for me and my neighbors..boom works like a charm

This is brilliant!! Now I have something to do in the garage when the snow starts to fly up north here.

I’m surprised no one saw this. Allyn you’re an honest guy & you stated tools/measurements weren’t your thing. At 2:51looks like you had the drill in reverse when you drilled the mason jar. Yikes!!! Glad everything still worked out though.

Chris Notap used a step drill bit to 11/32" - which keeps the 3/8" (which is = 12/32") vinyl tubing snug inside the drilled holes (without needing the FlexSeal).

Just tried this successfully! Had some issues getting the flex seal to properly seal the holes in the mason jar lid, but 3 coats over 3 days did the trick.

I hate trying to drain the oil on my lawnmower. This crazy idea changes everything. Nice.

A Mighty-Vac works well and its the same principal. I made a jar like this to change brake fluid, easy-peasy. This vacuum system is dope compared to turning the mower over or draining oil all over a machine (pressure washer, generator, etc).

My bf does lawn mower repairs and services for a living. I can't wait to tell him about this idea! Some of those push mowers are a pain to drain the oil...I'm sure he'll appreciate this idea! Thanks for posting it!

Makes oil changes on the time master much easier. Going to put one together this weekend and give it a try.

Great it worked great. I used 1/2 in tubing , with 5/16 for pickup and found a a detergent cap that fits my craftman vac. Fantastoc. Thank you

Instead of using the glass jar, I think you can drill holes on the cap of an old engine oil container to capture the extracted oil and after that, switch the cap for one without holes for returning the used oil for recycling at the garage shops or community recycling center.

This is a great method for changing lawn mower oil. 2 hoses are not needed however. Cut one 3/8 OD hose about 4' long. Cut the end on an angle like shown here. Run the end of the hose thru the cut bottle thru the shop Van to a plastic bottle that will sit inside. Drill another hole in the top for the end of the hose.

Man this worked perfectly with my push lawn mower. I will try it on my Husqvarna tractor next weekend. I shared your video link with Dennis Coffey (I hope you don't mind. I am subscribed to your channel and his. I watch your channel for lawn care tips, etc. and Dennis's channel because of Husqvarna tips, tricks, and taking care of my Husqvarna.)

This is great! I need a mason jar that’ll hold 5 quarts so I can do my car 😬

Nice video. I like your paver driveway too.

Great job on the video. Catchy music and your narration was perfect. Thanks for sharing.

You could mark the mason jar with ounce, pints, etc so you know exactly how much to oil to put back in. Kinda cool idea I might try one day!

Have an EGO Mower now so no longer need to change oil. When I did have a Honda though I found a similar device at Lowes for like $10, had a tube, container, and a manual pump. Couple pumps and it would suck all the oil out into a container.

Top of the line video brother. Excellent way to get that oil changed

Ok, I built this today. Two mowers and an edger got the oil changed new plugs, and washed in under an hour.

I made a homemade vacuum chamber using those very things except I use a vacuum pump . I will definitely be doing one of my mowers like this !

Amazing! My push mower is three years old and I never changed the oil because it's labeled "No Oil Change Required". With this contraption, now I'm going to do it every year no matter what. Thank you for sharing this video.

Top Sider makes a great engine oil extractor with no mess!

That's pretty slick. I definitely need to try this. Thanks to both of you.

I really like the idea of something doing the work for me, but I think this would create more work for me. It's more stuff to store, and I'd probably get oil dripping from the hose ends. More importantly, I don't know that this would get any sediment from the bottom of the oil reservoir. ...but it would give me a good reason to go buy a bottle of sodee pop.🥤

If it fits, put the mason jar right inside the shop vac and run the tubing through the soda pop cap and into one of the holes in the mason jar. Now, the lower air pressure inside the shop vac will draw the oil straight into the mason jar. Less tubing and better suction.

I can do that job a whole lot easier. Take the dip stick/filler cap out put mower on edge of a table/work bench and flip mower on it's side while catching the spilling oil into a bucket.

Did anyone else notice the drill was in reverse on the mason jar lid? I think that’s why it deformed and took so long to go through. A pilot hole probably would have helped too.

Good demo! I might just try it. I usually just tip the mower over. Seems to work well. Just got a TimeMaster! Love it! Could only use it a few times but looking forward to spring.

My Dad loved contraptions. Hank approved Al!

ONLY thing I would do different is tilt the front of the mower as far UP as possible where the pool of oil would puddle at the suck location better

Mason bit on a mason jar.

Now thinking that this could work to change the power steering fluid in my Envoy.

First Aussie 😁. A lot of work there Al. Great if you like to do it that way. 😎👍👍

Saw this when it first came out and was intrigued, right after I'd dropped US$15 on a schmancy hand pump thing. But I wanted you to try it first ('hold my beer...'). Genius!

Even though I have a battery mower, this is a great idea for other things! Only, for drilling the mason jar lid, I take it off the jar and put it on a piece of scrap wood, never know when the drill slips and you have glass shards everywhere.

Thats pretty slick. I use an oil suction gun for changing the oil in my mowers. I saw that in a video Jason Creel (Lawn Care Life) did about a year ago.

AMAZING video Allyn, def gonna try this.

They make hand pump versions of this that are good for oil, gas, or other fluids. Briggs and Stratton makes a really good one. It has a easy pour spout for emptying, holds a gallon (which is nice for riders), and no vacuum.

love the SpaceBalls reference!

I’ll be making one of those this winter for winter KZfaq content! Thanks so much for sharing!

3:55 "I let the sun straighten out the vinyl tubing" [fanning tubing with weed torch] hahahha

Great video. I have an ego that love but considering a Honda so I can use a heavier blade. Episode suggestion: "What can I use on Floratam". A lot of products out there but a lot of them say do not use on Floratam. Even the one for St. Aug say this. Also purchased your southern guide. Great stuff. But is all of that okay to use on Floratam too?

Im a simple person. I just tilt the mower on its side and drain mower where you fill it with oil. Takes me 2 minutes.

Super cool. But no Halloween video bummer

That’s a really great idea. Those Timemasters are like having Kirby vacuums outside.

You can use a turkey baseter. That's how I exchange power steering fluid in my cars.

Great video but, I have to admit I don’t have the patience to make it. So I went online and bought a marine oil extractor from west marine works great 👍.

Awesome tool! I have a hand pump that does the same job. However a homemade invention like this is way cooler! Do I need to send you a drill bit set... lol

I have the same Honda mower you do and i just tilted it and it drained out into a drain pan in like 1 min. Put a big piece of cardboard below it in case of any spills, but it was easy and no spills.

Rube Goldberg would be proud!!!

Totally doing this in the spring

Your neighbors must know you are not only a lawn care nut but a regular nut too. Don’t see very many grown ass men rolling around on the ground in the front yard working the best social media camera angles. If someone saw me doing that I am sure an ambulance would be called. He's having a heart attack! Keep having fun...

So beacaue you're using a masonry bit you thought it would be best to put the drill on hammer mode? Good boy

Did you tape that Brown paper to your driveway

F****** amazing. Wish I have seen this before I tried changing my power steering With a manual hand pump. One question or why did you have to buy two different sizes of hoses why can't you stick 2 of hoses with the inlet and outlet of the same size? Would this happen to work with a larger jar ?

The Honda is nice. All I do is have my wife hold a gar by the fill and tip the mower over and it pours out. So easy.

Great quick Tip Vid! Love that little $10 contraption, next time my push mower needs and oil change I am doing it your way! Believe it or not Allyn I am worst than you with power tools and I think I can even pull this one off! Great Vid Allyn! Chad Upstate NY

I just tilt mower on side and empty in my oil pan. Cheaper and quick. But that's cool

That's genius hurry up and patent that

I use the $45 oil extractor I use for all engines, the Topsider.

How much oil do you replace with? 15.9 fluid oz?

Very cool idea

This is great! Have you ever thought of a side gig at an instant oil change?

Who else winced or shook their head while watching a masonry bit drill metal? haha

“The bottom 5’ of a 10’ hose” 🙄🤣

Nice Job!! Just be careful what you stick in your 'oil hole'! haha!

loving the H3 references

Similar concept as a chest tube. Or better yet, the old three bottle system before we had modern chest tube contraptions

Darn you! I was going to try this out! Just saw the video the other day!

I just bought the material last week to build this after I saw the same video!

Wranglerstar would approve this video

Nice

That’s awesome thanks Allyn

Awesome. I’ll have to do this

Drill bit was going in reverse I believe

So since the self-pace toro says you don't need to change, just add. Have you changed the one in yours?

Great idea Allyn. I work on small engines and have a Harbor Freight oil extractor. It works great. Say what is your advice on the mowers that advertise never need to change the oil? I advise to change it anyways at least once a season and use synthetic oil as that is what engine manufacturer is using. To me they are wanting to sell you a new mower in about 3 years as the engine will be junk at that time.

Did you use an impact driver to drill the hole in the soda lid?

Very cool idea, might give this a try next time!

Are my eyes playing tricks on me? Or was your drill in reverse drilling the holes for the mason jar? Anyways I will be doing this in the spring.

Ace Hardware has the tubing in rolls to cut whatever length you want.

Finally a good quality video from the lcn.

It was a sad day today 😞 mowed my 5.5 year old mid- iron Bermuda for the last time. I move on Tuesday.

I know this music but can’t remember what low budget porno it was in. Please help.

So mason bits are meant for mason jars? Always thought they were for concrete.

How neat is that?!

what if i cut off the TOP half of my tubing?

Good stuff Sir, never would've thought to do this on my own. One question, is the time master a no need to change oil like my Toro super recycler?

Thanks for sharing Allyn!!

Or just a $10 pump siphon on amazon

That's super cool!

“Then play on Instagram for 10 minutes...” 😂😂😂