EASY Motion Activated Staircase Lighting

EASY Motion Activated Staircase Lighting - NO PROGRAMING!!!

Рет қаралды 2,052,977

8 ай бұрын

🚨 UPDATED DAILY! BEST DEALS on AMAZON: bit.ly/48FGnUv
☑️Check out my sponsor to begin your FREE 14 day trial to Aura: aura.com/chrismaher
Diffuser Channel 1m Amazon: amzn.to/47aIujz
Diffuser Channel 2m Amazon: amzn.to/3QoHeDb
Diffuser Channel 1m or 2m Muzata LED Store: bit.ly/3NHG5Uw
Aqara LED Strip T1: amzn.to/45xnCRz
Aqara LED Extension Strips: amzn.to/3PK4dGS
Aqara Hub M2: amzn.to/3rBFLQ2
Motion Sensor P1: amzn.to/3TbVUqs
3m Removable Wall Strips: amzn.to/3OvUaFY
Sticky Tape Used: amzn.to/3Lf6fgM
Corner Connectors I used: amzn.to/45ZoWNx
Cable Concealer Kit I Used: amzn.to/44NEsei
Wood Pieces I Used: bit.ly/3RbUrQa
The best way to help support my channel is to like, comment, make sure your subscribed and share my videos with as many people as you can. The other way is to use my links above as I get a small % at no extra cost to you if you buy something. Thank you all for the support!

Пікірлер: 933

@ChrisMaherDIY 8 ай бұрын

🚨 UPDATED DAILY! BEST DEALS on AMAZON: bit.ly/48FGnUv ☑Check out my sponsor to begin your FREE 14 day trial to Aura: aura.com/chrismaher Diffuser Channel 1m Amazon: amzn.to/47aIujz Diffuser Channel 2m Amazon: amzn.to/3QoHeDb Diffuser Channel 1m or 2m Company Site bit.ly/3NHG5Uw Aqara LED Strip T1: amzn.to/45xnCRz Aqara LED Extension Strips: amzn.to/3PK4dGS Aqara Hub M2: amzn.to/3rBFLQ2 Motion Sensor P1: amzn.to/3TbVUqs 3m Removable Wall Strips: amzn.to/3OvUaFY Sticky Tape Used: amzn.to/3Lf6fgM Corner Connectors I used: amzn.to/45ZoWNx Cable Concealer Kit I Used: amzn.to/44NEsei Wood Pieces I Used: bit.ly/3RbUrQa The best way to help support my channel is to like, comment, make sure your subscribed and share my videos with as many people as you can. The other way is to use my links above as I get a small % at no extra cost to you if you buy something. Thank you all for the support!

@learningisgrowing 8 ай бұрын

Really sucks a lot of these products arent available internationally

@darren763 8 ай бұрын

Great video! Do you know the total (rough) cost was for this build?

@user-zn6yg3bq7l 6 ай бұрын

What are the connectors to span the cut?

@pasmas3217 5 ай бұрын

would suggest a quick 30s segment at the end where you put together a table with the costs over the whole project and maybe time spent. it is quite obvious that work and time spent are not major on this, which makes it great (and that is why I say "maybe"), but the cost isnt very practical to open 12+ links to check out the cost and whether to consider copying this great project or consider other options)

@CyberTransport 3 ай бұрын

@@pasmas3217Really?? The creator took however much time to film the whole project and shared links to all the items he used, but you're not happy because he didn't take more time to list out all the prices which will change. If you're not willing to invest 2 minutes to look up the prices, kind of hard to believe you're going to spend any effort to do the project.

@Brian-nz6ns 6 ай бұрын

At first I thought it was going to look tacky like most LED projects like this, but the corner molding made the difference. Brilliant.

@blyons2000 5 ай бұрын

Same!

@JohnSmith-fw2zf 2 ай бұрын

That’s cause most tacky homeowners put them in instead of leaving it to the professionals

@DavidHelloWorld 8 ай бұрын

Wow, nice work! Turned a pretty typical looking stairway and hall into a premium feeling environment. Almost like a theater, or a futuristic spaceship interior. With an end result like that, it's hard not to feel tempted to try this. Thanks for sharing, and for the inspiration!

@Wathfea 8 ай бұрын

A friend of mine has a similar project. The extra addon is with a raspbery pi conencted to a weather api and the colors change corralated to the current weather. :)

@zekehall1 7 ай бұрын

Where can we see it ?

@LaneyaWiles 6 ай бұрын

@@zekehall1for real?!

@arthurashbeats Ай бұрын

that souns dope af

@wilma888 7 ай бұрын

This looks immaculate! The attention to detail definitely takes it to another level. Worth it 1000%

@wealthgenerationstrategies 7 ай бұрын

Very good demonstration! I was a bit hesitant but once I saw you put up the angle board on the metal covers, it looks 100%. Great job.

@LessThanHandy 7 ай бұрын

And I thought "I" was a stickler for perfection. Unbelievably clean job, this is beyond pro level. Thanks for sharing with us.

@petersenal06 7 ай бұрын

This is sub pro level. Definitely not beyond. Minor details that a real pro would have done include but are not limited to 1. Putting a return miter on the end of the trim piece at the bottom of the stairs so it doesn’t look unfinished. 2. Fishing a wire and hardwiring the strip so it doesn’t need the god awful looking conduit lines going to the bedroom door or an outlet with a bulky plug. Putting the correct common angle on the trim piece at the top of the stairs so the pieces line up. 4. Installing the motion sensors in a more inconspicuous location like at the ceiling and wall line. All in all it looks good for a DIYer but it is definitely not quality, professional work.

@calebwooldridge242 Ай бұрын

@@petersenal06you realize this is proof of concept right? He literally said he's going to move the motion sensors and hardwire the leds. He didn't spend the labor cost of what a pro would charge and reaped 90% of the rewards.

@petersenal06 Ай бұрын

I was replying to the above comment which stated “beyond pro level”. I was simply pointing out what a real pro would have done. I still think the work the guy did is way better than a typical diyer but it’s not pro level and it’s definitely not beyond pro level

@WorkVibeGame 8 ай бұрын

This is exactly the type of tutorial I’ve been looking for! Thank you for the inspiration! Going to try this next week

@dale_v2454 7 ай бұрын

you try it ?

@WorkVibeGame 7 ай бұрын

@@dale_v2454 not yet. Still waiting on my boss (the wife) to approve the budget.

@piplup10203854 7 ай бұрын

I wasn't sure if I would want to do something like this with my stairs but then I realized it does add a really nice feeling at night to have that nice diffused glow. Dang it, I am gonna have to try this out.

@anthonya824 7 ай бұрын

This looks super cool. I love the effort to make led strips look more finished and refined.

@HM-nu3hb 7 ай бұрын

The strips look finished, but the baseboards do not!

@itsOnlyMe2012 6 ай бұрын

Explained all of the process well. Including the non perfect fixes and most of all kept the whole video simple. Well done mate!!

@Hajjat 6 ай бұрын

So happy I came across this! Bought a house a year ago - was searching back then but couldn't find anything that's not too complicated. I lost hope and decided to do it later. I decided to search again today, and was happy to come across ur recent video. A lot of nice ideas, please keep posting!

@jimbabcock6285 4 ай бұрын

Wow. Some products that I didn't know existed. Thanks! Two critical comments: 1. Adding the caulk pretty much negates the use of the Command strips. If the lights are removed, the caulk will pull the paper off the drywall. 2. You are indeed programming the controller for the lights. It's all very intuitive with the controller interface, but you ARE programming. Nice result. Thanks for posting.

@bdlii 8 ай бұрын

Your narration and explanations are always top notch. You also did a great job making it look tasteful rather than gaudy with the corner moulding Chris. I only wish you would stop finding cooler light manufacturers. I finally got around to using the last cool company and now there an even better one :p

@OGKenG 2 ай бұрын

Chris, I've seen a few of your videos now and I'm impressed at how you do the installations, produce the videos and keep the quality in the process. Blessings.

@neoburst1 6 ай бұрын

as someone who's regularly up at 3-4AM for work a project like this seems great instead of going downstairs using my phone seems like a great thing

@Just-MK 8 ай бұрын

you truely top yourself with every video you release. You are such an inspiration

@TheRealTommyR 4 ай бұрын

I’ve been wanting to do this for a long time; this tutorial gave me exactly what I needed.

@thomasrodriguez1931 6 ай бұрын

Like many have stated, this came out really nice. Calking and painting the wood trim really brought all of that together. How high off the floor did you run the frame?

@robertoreyes897 7 ай бұрын

Those yellow grout sponges and a bucket of water do an amazing job at cleaning up caulking. They make a rookie look like a professional.

@kennywayne8796 Ай бұрын

Chris, that was one of the best step by step flawless tutorials I have seen to this day. And not just the topic, but just excellent teaching & smooth flowing speaking skills.Thank you so much for sharing. I'm now a subscriber

@hippopotamus86 5 ай бұрын

I wondered why anyone would get excited about a brand releasing a product then realised I have those sensors all over my house and I love how easy they integrate with home assistant. That's my Xmas wishlist sorted!

@eyefly001 8 ай бұрын

Another great video! I think it is your attention to detail that I like the most. I have been sitting on a project to make a motion detected strip light for my stairs but haven't been able to decide how I want to do it. I really like your idea to set them against the wall and point down, then hide it with trim. I wont be using smart devices, just simple plug and play, but this gave me some great ideas to work with. Thanks!

@steve_idiot 8 ай бұрын

This is great, I'd asked a question about staircase lighting in a previous video and this is the solution I was looking for. Keep up the good work Chris.

@adidasjoel17 2 ай бұрын

Again, soo sick! We’re moving and our new house will have stairs whereas we don’t right now. I’m ABSOLUTELY doing this once we get settled in 😎 thanks dude

@NelsonClick 4 ай бұрын

I have not seen another install on KZfaq that placed the lights where you did. I like yours better than all the others because there's no glare. Super easy on the eyes, especially at night when it's needed and the illumination is where it's most needed. No hot spots. Cleaning and vacuuming the floor will not be impeded.

@sarahanna68 3 ай бұрын

absolutely LOVE IT, turned out really well. it is a result of exactly what I am trying to do. The height above the floor is perfect.

@-djs 8 ай бұрын

As always Chris an excellent and easy to understand tutorial, Thanks for your continued work and videos. I hope you are all well 👍🏻

@Funkmaster007 5 ай бұрын

Very cool video, well filmed and easy to follow! Thanks for taking the time to put this together!

@jaycollado9051 8 ай бұрын

Awesome video!! Your super detailed and you gave me confidence in trying this DIY! Thanks!! 🙌🏼👏🏼👏🏼👏🏼

@robertcastillo90 7 ай бұрын

Not gonna lie, thought it was gonna look really stupid, but this looks amazing. So much I'm probably gonna do it. Great video

@DMlloyd01 8 ай бұрын

Bro.....STOP GIVING ME PROJECTS!!!!! 😂 Another great video, thank you for posting.

@Mithinco 7 ай бұрын

Your home is turning into a futuristic sci-fi home! Looks fantastic!

@lavendereyesgal1125 4 ай бұрын

Love this and thank you for sharing. Very detailed tutorial and I can’t wait to be able to do this in my home. The possibilities are endless.

@Rich33527 7 ай бұрын

Great video. I mounted my lights under the handrail pointing down. It lights up the entire stairway. My stairs lead to a large loft, so no hallway to worry about.

@richardhalliday6469 7 ай бұрын

I tend to use the recently introduced LED cob strip's nowadays. ( Chip on board). The light is far more uniform almost like a continuous neon strip, no light and dark spots, very neat, diffuser is optional ,I tend to run just as a strip, it blends into staircase edges seamlessly. Various led count per metre available as is voltage, 12 and 24v. I use 12v in all my projects to keep everything uniform as most controllers, passive, infra red, etc all tend to use 12v. The colour range is pretty extensive, besides white, cool, warm and standard, blues red purples, green and more. The blue looks stunning on stairs, landing and newels. I buy everything direct, I know all the proper LED specialist manufacturers now who supply such as Amazon and the UK lighting industry so I can save a great dealing direct. As an indication I pay around £8 ( $10 US) for a 5 metre length of COB LED which I think is reasonable.

@vaseppi 4 ай бұрын

@richardhalliday.. agree that I like the lighting effect of COB slightly better but for my project the motion triggering is the most important aspect. Can you recommend any motion sensing solutions compatible with COB strips that are equally as customizable and manageable as the Aqara sensors i.e. can trigger multiple individual strips in different locations etc.. Please let me know if you do!

@dnd1556 7 ай бұрын

Looks fantastic Great idea. Thank you for a detailed walkthrough of the whole process.

@climaxhubbard 2 ай бұрын

This corner molding finished this project nicely. Very cool

@cbrobinson10 6 ай бұрын

For sure doing this to my stairs... Maybe this weekend lol

@_Tabled 8 ай бұрын

This man is insane

@AT-yh4gf 2 ай бұрын

It looks high-end. Great job!

@SqthecircleBK Ай бұрын

Great job!!! Thank you for taking the time to post the process and end results. You too be blessed!!!

@VSPlum 8 ай бұрын

To turn off the LED strip that's better to use single automation with both top motion sensor AND bottom motion sensor detect no motion. And to turn it on use the single automation with both top motion sensor OR bottom motion sensor detect motion.

@oSJmee 5 ай бұрын

Looks like a great project and good inspiration 👌🏼 I was wondering if it's possible with this setup to program the light strip in a way, when the top motion sensor is activated, that the lights on the top floor light up and the lights on the stairs light up in a motion (from top to bottom)? And the other way around, so when the bottom motion sensor is activated, the stairs are lighted up first (from bottom to top) and then the upper floor?

@jbaby007 Ай бұрын

You have been the only channel that I have found that has consistent uploads regarding LEDs and how to set them up and install them. I was so intimidated by wleds and knew nothing about them. Thanks to your channel, I'm now considering a whole house setup lol

@TReZxDrEaMz 8 ай бұрын

Looks really clean!

@brianhill3603 7 ай бұрын

Nice job, but I would have used the caulk on the skirting aswell to fill the gaps you have👍

@Sidecutter 8 ай бұрын

FYI, those Command strips are only "removeable" if you can access the pull-tab for removal. They will tear up your walls like any other foam tape without that.

@Riot392 7 ай бұрын

Could always get the Velcro ones that way you can take the diffusers off then have access to the tab on wall 👍

@JayJay-jx3zg 7 ай бұрын

Ever try heat to remove them?

@madi7178 6 ай бұрын

I’ve used my old learners permit to wedge under the foam so I could get enough leverage to make my own pull tab. Worked fine just had to be patient.

@8Arachne8 8 ай бұрын

That was awesome. Been wanting to do something for my stairs.

@USARobert59 5 ай бұрын

Wow! So cool. You did an great job installing and setting up the lights. The wife and I have been thinking about doing the same. Thanks for sharing this video.

@peterfconley 3 ай бұрын

Top tip: when caulking, keep a sanitizer bucket of warm water with you to keep your fingers wet and to dissolve excess caulk (non-silicone only). Use blue shop towels as well, and for that run you should be able to get away with only using two shop towels.

@logan5326 6 ай бұрын

You could have done the same thing to the baseboards (gaps) w/ caulk, but good job overall man.

@gabrielalicea4803 7 ай бұрын

Looks amazing! Would love to try this project at home. Blessings

@johnwayne2103 7 ай бұрын

That was an awesome project! Nicely Done!

@gb1613 8 ай бұрын

Another great video, Chris! Have you considered trying out Home Assistant? With this, you can control all your Govee, WLED, and Aqara devices from one interface as well as to setup automations to control the lights based on time, sun position, or triggers from third party devices (motion sensors, door sensors, luminance sensors, etc). I've been running it a couple years and have a lot of my LED accent lights setup with the Adaptive Lighting add-on so that the brightness and color temperature adjusts with the position of the sun throughout the day and into the night as well as being manually controlled with a mix of Zigbee and Z-wave battery powered/mains powered wall switches and scene controllers. The reason why I initially set up Home Assistant in the first place was the annoying practice of having to turn on my Govee immersion lights manually every time I turned on the TV and having to use multiple apps to control everything. It'd probably be some good content for the channel!

@VSPlum 8 ай бұрын

@@ZaleraPraxisYou can connect Aqara T1 strip directly to HA using ZHA and it works almost perfectly, but without adressable properties. Or you can connect it using Matter protocol from Aqara Home to Home Assistant, but in this case you can't use RGB diodes at all, you can only choose between warm white and cold white.

@dadsquatch79 8 ай бұрын

HOOOMMEEEE ASSISSTANT! HOOOOMMEEE ASSSIIISSTANT!

@JB-fh1bb 8 ай бұрын

tbh as a long-term user of home assistant it’s gotten pretty exhausting. Keeping up with the update schedule alone is so much effort.

@doug350zTT 8 ай бұрын

@@JB-fh1bbI get to it when I get to it … if I know my Z wave or zigbee devices need improvement then I will upgrade when I see one

@JB-fh1bb 8 ай бұрын

@@doug350zTT that's what I did for a while too (maybe a couple years), but when I finally had to update it was a complete nightmare since so many things had changed in between

@APMtube9000 5 ай бұрын

I have to say, cutting channels like these to size was a huge pain when going around corners when I did a gapless installation myself. Additionally the usage of 5V LEDs made the voltage drop very apparent, so I had to splice power in at 4 separate points along my 20m stretch. End result is really nice though and I do recommend the Muzata diffusers as they look super nice

@ChrisMaherDIY 5 ай бұрын

Thanks so much for the update and glad it turned out good! Did you end up using sk6812 lights?!

@APMtube9000 5 ай бұрын

@@ChrisMaherDIY I did not. I used an ESP8266. Did this project last year and went all around the top corners of a room. Wish a product like this was available when I worked on mine. I have always followed your channel for lighting advice and setup though, so thank you very much for your help.

@NaivadSnow 8 ай бұрын

Dude… project is insane! 💯 awesome vid as always!

@shakester2010 7 ай бұрын

Clean job!! Looks awesome!

@StudPack 8 ай бұрын

Chris! This is exactly the project we were wanting your help with! Our question is how would you get LEDs to light up as you walk up the stairs?

@marcnakanishi1568 8 ай бұрын

Another YT collab!!! There are 2 motion sensors. One at the base and the other at the top

@TheHookUp 8 ай бұрын

If you did it exactly like this video, but used the Aqara FP2 MMWave motion sensor instead you could figure out exactly where someone was on the stairs. I'm not sure how many zones you can set up in the lights and mmWave sensors, but it would be the easiest way to do it without programming. If you wanted to do a whole lot of wiring you could do load cells on each stair and get really fancy with WLED.

@StudPack 8 ай бұрын

Hey @@TheHookUp! That's interesting. We actually found a pretty great kit online that we think is going to do everything we need, but we are a bit skeptical! Sounds better than splicing and running each strip individually. Now to do research on load cells..

@IamLegionGreen 8 ай бұрын

Chris this looks so great! As a tip you can also use spackle instead of caulking. Much more friendly should you need to take off the channels at any point. Keep up the great work!

@riseabove3082 7 ай бұрын

That was my exact thoughts when I was watching this.

@andrewk8636 7 ай бұрын

Never use spackle for seems. It's for patches

@jeffb1886 3 ай бұрын

@@andrewk8636 Agree 100%! Always use caulk for this. Flexible for temp changes in summer/winter. Want to remove the channels and concerned about wall damage?? Simply gently run a razor knife/box cutter to break the seam.

@bulufish8208 8 ай бұрын

U have a blessed day 🙏. Thank you for your time and effort to help make DIY work ez

@pigskinrode0 6 ай бұрын

Totally doing this when I buy my first home. Looks great !!

@StudyZone1255 8 ай бұрын

Bro imagine a ghost walking through the staircase at night . 😂😂🤣🤣

@_walgreens 8 ай бұрын

I swear that’s something that would happen to ke

@Shylockza 8 ай бұрын

Imagine if PIR could actually detect them... 🤦🏻‍♂

@StudyZone1255 8 ай бұрын

🤣@@Shylockza

@1hiphopnow 7 ай бұрын

Nasty situation 😂

@NewstatePlayer100 7 ай бұрын

I'm ghost 👻

@markwilson9061 6 ай бұрын

now go back and caulk the skirting boards, savage

@mrb3483 3 ай бұрын

That really looks well at night,perfect because my vision isn't so good,I was thinking of individual lamps,but after looking at you finished product,it's just what I need,thank you for you video💯👍

@miket5506 5 ай бұрын

This came out very nicely. I may do something similar for the stairs in my home. Thank you for sharing!

@Si-jk4iy 7 ай бұрын

Caulk THEN Paint

@dumpsterfire6351 3 ай бұрын

Caulk then snuggle

@Casey.S. 8 ай бұрын

Looks fantastic. Nice job 👏

@MrLeBANG 8 ай бұрын

Bruh! One of your best ones yet... Keep the inspiration coming, thank you 👏

@pnketia 3 ай бұрын

Wow this looks really nice! I want to do this in my garage.

@marciohenriquesousaoliveir966 7 ай бұрын

That’s amazing! Congrats!!!

@ryangerlach8368 8 ай бұрын

You are a rockstar. Never stop!

@63off 7 ай бұрын

Very nice solution to an issue I've been wanting to address for quite a while. Very well explained too.

@Woody7150 6 ай бұрын

really enjoyed this i dont watch a lot of diy vids but really got something from this!!

@torymonroe5486 3 ай бұрын

This video just changed my life!!!!! Thanks!!!

@scalelabs 7 ай бұрын

Looks sick!

@Icebergslim333 7 ай бұрын

That's EXACTLY my same hallway and landing (small window and all) that was in my house that I just sold. Thank you for sharing this! 🥲

@user-qs8jb9ue1g 2 ай бұрын

Nice job man thanks for your time!

@blakey271able 7 ай бұрын

Awesome video as always. A good idea with the caulking is a length of masking tape run your finger through it then peel the tape off I recently tried it and it gives a really nice finish. You've given me many good ideas to try thank you for your content

@Elysian_s 5 ай бұрын

This looks amazing ✨

@MrKrueger88 8 ай бұрын

Damn this guy is nice , and has some it of the best explanations and walk throughs on KZfaq !!!!! I'm subbed twice to you Chris on two accounts , and now I'm starting the build . Thankyou ever so much 😁👍💯 Cheers from Australia