Easy Plug and Play Turn Signal Kit Install | Can-Am Defender | How To

Easy Plug and Play Turn Signal Kit Install | Can-Am Defender | How To | SuperATV

Рет қаралды 45,123

4 жыл бұрын

Our deluxe plug-and-play turn signal kit is the easiest turn signal kit to install yet. It uses dash-mounted rocker switches for the turn signal, hazards, and horn that all illuminate as expected. From end to end it utilizes OEM style plugs to connect to your factory wire harness for ease and reliability. It utilizes the OEM brake lights for the rear signals. For the front signals, our Deluxe Kit includes for amber LED lights for maximum visibility. The completely sealed and water-resistant control box coincides with IP67 standards. That means it worked even when immersed in three feet of water for thirty minutes. The box mounts conveniently under the hood using the included mounting bracket. It’s easy, it keeps out water, and it’s durable. Our deluxe kit fits so well, your friends will wonder if it’s OEM.
Note: Requirements for street legal UTVs vary from state to state. Check your local laws before driving on the road.
FEATURES
-Deluxe and standard kits available
-Includes compact 105 dB horn
-Easy to install
-Plug and Play!
-Includes all wiring and connectors - pre-assembled and color-coded
-Signals are bright and visible from all angles
Get your turn signal kit today:
www.superatv.com/can-am-defen...

Пікірлер: 19

@hunter19871956 4 жыл бұрын

Awesome! Great to see you guys doing some “how to’s” on the Defender! :) I’ll be adding a turn signal kit soon. Thanks for the inspiration!

@SuperATVMedia 4 жыл бұрын

Heck yea! The Defender is an excellent unit. We have a whole slew of installs for this machine: Defender 3" Lift Kit Defender 2" FWD Arms Defender Fender Flares Defender Deluxe Turn Signal Kit Defender Flip Windshield Defender Aluminum Doors Defender Cab Enclosure Defender Side Mirrors Defender Rear View Mirror Defender Skid Plate

@Boxman69 3 жыл бұрын

Great video! So very detailed not skipping steps.

@Kfiedler932 2 жыл бұрын

It seems like Can am changed the firewall a bit on the 2022 models, I bought this kit and it was impossible to get the harness through the same hole as the main harness going up to the hood, had to bring the harness down behind the radiator and along the frame then through the plastic near the back on the bulkhead

@kenndogg7469 4 жыл бұрын

Nice , helpful video thanks. Do you have the kits out for the 2020 defender xt. Hd10?

@larrymitchell546 2 жыл бұрын

I'd like to see some plug covers for the factory wires in the rear .

@jbird22cal 4 жыл бұрын

Wow. That module is huge, the camera angle was a little off. Am I correct in thinking it runs parallel to the center seat lower cushion?

@Karmachrome16mm 2 жыл бұрын

Went to your website and only 2022 CanAm Defender HD-10 is listed on the dropdown. I have an HD-9 so I'm unable to search products.

@YurtFerguson Жыл бұрын

Is the harness on the HD8 different? The rear harness has a totally different connector than the utv harness, it also came with instructions for a different system and no horn but did come with the horn rocker switch.

@SuperATVMedia Жыл бұрын

Give us a call at 855.743.3427 so we can get you the missing horn and correct instructions! There are two harness plugs in the rear that are easy to get confused, but the correct instructions will clarify which to use.

@YurtFerguson Жыл бұрын

@@SuperATVMedia we had gotten it figured out but thanks for the reply. It did still have the instructions for the universal harness and not the can am specific system we had. But we where able to find the adapter for the rear harness and the horn where wedged in the box it came in. Otherwise not was a pretty easy installation and the sxs is on the road.

@sethwendell2769 11 ай бұрын

Do u have any kits that use the xt or xmr signature lights as the turn signal ?

@SuperATVMedia 11 ай бұрын

We do not, unfortunately.

@vincentthibodeau1404 Жыл бұрын

Is there a reason went i search for this kit for a defender i can t seem to find it , only give me universal kits . Wondering why is that .

@SuperATVMedia Жыл бұрын

Not sure on that. If you are using the My Garage feature on our site, you will only see items that fit your machine. Here is a link to this kit, check out the fitment tab to see if your machine is listed or give us a call with your year and model and we can help! www.superatv.com/can-am-defender-toggle-plug-and-play-turn-signal-kit

@jew0182 Жыл бұрын

Is the control module been updated? Is it still the same size?

@SuperATVMedia Жыл бұрын

The control box has been updated however it is the same size as the original.

@erictracy9213 2 жыл бұрын

What is the part model # of this kit

@SuperATVMedia Жыл бұрын

This is kit TSK-CA-DEF-004-001. You can check it out here: www.superatv.com/can-am-defender-toggle-plug-and-play-turn-signal-kit?sku=TSK-CA-DEF-004-001