Easy Thread Changing on your Serger / Overlocker - The Pull Through Method
Рет қаралды 735
4 ай бұрынAn easy way to change your serger thread without having to fully re-thread the machine.
This is handy if you're wanting to change color or you notice the thread is about to run out.
The new thread can be tied on to the old thread and pulled through. If your knots are small enough they will go through the looper eyes. The knots will not go through the needle eyes so they will need re-threading.
Please consider supporting the channel at Patreon - / sewingmachines
Web Site - www.institches.co.nz
@jdhtyler 4 ай бұрын
A weavers knot or sheet bend is smaller and might pull through the eye of needle, overlocking thread is quite thin. I have seen it done with just one hand but never mastered it myself. However as a climber I can tie a Bowline also a Clove hitch with just one hand. In the 1980s I used to watch them thread the WARP threads on a weaving loom (the shuttle moves WEFT to right ). there were a lot of weaving sheds in our Lancashire UK town. We were blacksmiths that repaired the machines if the Tattlers could not fix it.
@jeanettewithrow9641 4 ай бұрын
Thanks for video
Sergio Outdoors
Рет қаралды 92 МЛН
oxmanagain
Рет қаралды 639 М.
Trish Newbery Design
Рет қаралды 9 М.
Abi’s Sewing Den
Рет қаралды 132 М.
Seasonally Productive
Рет қаралды 54 М.
Julija Gobere (SewingJulie)
Рет қаралды 231 М.
Фото радужки глаза Владимир ScreenEyes
Рет қаралды 6 МЛН