I would like to take a moment to acknowledge whoever edits these videos goes out of there way to mute out the miter saw and dub in music. Great job, stylish, simple but noticeable. Really like the 2nd one in white with the accented joints.

I’m not a dumb person, but I gotta say that 45° beveled stop block was really freaking smart. Great video and thanks for teaching me a new trick!

That is a grand slam. Simple yet very functional for a tight spot.

I love the tip for cutting the 45 on the braces. It's simple, but right on. What a great idea. This is a beautiful, functional little table.

‼️❤️I love to watch your videos, over and over, you make it look so easy, is very inspiring what you do, love this console table ❤️❤️❤️❤️❤️‼️BLESSINGS TO YOU AND YOUR FAMILY ‼️

Love this design. I will be adding hidden storage under the top and base. Thanks again for such wonderful designs.

I could envision one made of cedar sitting on a porch loaded with plants. Another great design, thanks.

This beautiful! I'm gonna make the larger version of this for my husband's sitting room! ❤️ 💛 💚 💙 💜

Another hit again. I wonder if I could accomplish this. The last and only time I made a piece of furniture was in wood shop in high school 50 years ago. I'll have to see if my husband's table saw adjusts to those angles. Thanks Ana.

You have stirred my imagination and I am picturing how it would look and the various places it could be used and what I would have to change for it to work in each spot. Thank you very much!

Talent design well planned & simply great - again!!! Thanks

They're both awesome - dressing up the white one with angle brackets was perfect!

I really like the addition of the black strapping that you added on the white version. 😍

Great idea. The angled cuts add a nice touch.

I love the white version Especially the black accents. You did it again Ana.

It’s beautiful. I want to try one. Thank you so much for allowing us to use your plans.

Perfect as always. Easy to follow along and learning little tips along the way. Thanks for sharing, Ana!

I see your current work space becoming your lab for all your wonderful designs once Jacob has the shop up and running! What fun!

Love it! Should work great in our small home!

Another great project Ana!

This is a great table. You are so talented and thank you for sharing all of the plans to your designs. Very generous.

That is a perfect one for the little hallway that connects 2 bedrooms and a bathroom, hard to find right piece we dont bump into walking out of the bedrooms, I bet this would fit nicely!

This is great Anna, another great simple project but with so many options just knowing how to make the legs and get creative. Thanks again.

I love, love, love it. Thank you for sharing!

Thank you for all the free stuff Ana, and of course the kind energy.

Beautiful. Like the White One. Thanks for free plans.

Love it & I'm going to try it! Thanks for the plans.

Beautiful and study. Great instructions. Thank you

That's exactly what I was looking for at the flea market and yard sales!

Great tables. Great instructions. I built two of them and just to let you all know!, It’s 2022 now and it cost me almost $300 for the lumber. And yes, that’s stud grade 2x4’s and pine board. If you want to build them, just increase that budget!

Nice work Ana! 😃👍🏻👊🏻

I'm so making this! Love your woodshop, awesome.

You are just awesome, you have a beautiful family. Thank you so much for sharing, you make your projects look so easy. Thank you for explaining everything. God Bless you and your family. Thanks again !!!!

really like the white ones thanks for sharing the video

Just the right touch you needed! Thanks

Well done. I appreciate your practicality and cost consciousness.

Thanks Ana. I like it a lot. Some people can add storage to the design if they live in small places.

We are watching a very successful channel

Love this piece, looks like Ill be making something soon. Thanks for sharing

That's beautiful!

Love this woman’s work!!! She’s a true gem! Thank you for your videos and knowledge!

Awesome. Gonna attempt and maybe add backsplash just for decorative purposes.

Thanks for sharing, Ana.

That table is just right for the cabin I'm building. It's small scale but useable. Those hard to get areas I would stain prior to assembly. I do buy the foam brushes by the bag full.

It looks easy to build. Looks great! Thanks for sharing.

I need to make this!!!

You have an amazing workshop. I would love that

Parabéns Ana White, pelo belo projeto que desenvolveu, Agradeço por compartilhar. Deus te abençoe muito parra que tenhas outros projetos.

HOW beautiful!!!! 👍🏻❤️👍🏻

Thanks for the share. My husband made me one with a wine rack on it and I love it.

Another stunner as always!!

Ana, you're the best! Period! - Ken in Hawaii

I need a couple of those pieces now !! 👍

Awesome Build Ana. I want to make this one

Thank you so much for this video! I did try to make it I actually made two and I absolutely love them!!!

You’re one of my favorite woodworkers

You and Jacob always make everything so easy! Could you do a video on your dust collection system for the mitre saw?

I love this console table. I think I'll build but I have a walnut live edge for the top

How about a design same height, same width but place the support posts at the back of the table, where the table top and base would be cantilevered? A middle support could be added to hold shoes in a vertical, toe down position supported by a peg. Might even have enough room for two rows of shoes for a more than two person family.

I have to Agee with the below comment. This was one excellently produced video not only do I love the video and the music, I’m so jealous of your shop, so clean it’s ridiculous😁 This is my next project. !!

Nicely done once again 👍🇨🇦🤗

Awesome video

I really like your repetitive cut set-up. Nice spline idea on the white one. Any sealer before the stain? My stain on pine never turns out right, looks splotchy.

Cool project. Looks super nice. Greetings from Munich, Tom.

Very cute, thank you

Love your videos! They are so helpful for beginners. I can tell other newbies to make sure your boards aren't twisted. My 2X4 was were worse than I thought, making fitting the pieces a nightmare as I didn't notice how out of whack it was until putting on (or trying to put on) the 1X10. Eventually, I triumphed, but I could have saved myself hours as my attempted fixes that made things worse :)

Awesome!!!

You do amazing work!! You are so appreciated

That looks great. Simple, sturdy, & looks awesome w/the rest of your theme. I might be able to handle this one & use it as a TV stand. Could even add a 3rd shelf in the middle. What's your thought on a 3 shelf TV stand? Could it be done & sturdy enough w/the boards also going around the edge like the top & bottom shelves w/the trim boards on the edges? Am I making any sense to you on what I'm saying? Well it looks amazing, Chris from Missouri

I was was thinking about requesting a video of this because I needed to build one for my home. Haha Would you consider doing a video on building a custom garbage can that slides out from the cabinet under the kitchen sink?

إبداع جميل لامراه اصيله 👍👍👍

This is adorable, but what happened to the apothecary-style desk/bar with the hidden chairs that was on that wall? I LOVE that piece! ❤️

YA GUY ARE AWSOME THANKS FOR ALL THIS VIDEOS I JUST STARTED WITH ALL OF THIS MY BROTHER PASSEDWAY SO THIS HELPS ME IM JUST SCARED OF THE BIG TOOL LOL BUT IM TRYING AND YOUR VIDEOS HELP ME ALOT SO THANKS

It’s beautiful

WOW! I love that x x

You give me confidence that I can actually build something :) I already followed your kitchen drawer video. By the way, I saw your wood is from Gorman Mill which is in Kelowna where I live :)

Ana, you're the best, listen, I really enjoy your musical choices can you share?

Nice!

HOME TOUR!! What are the colors of her walls I wonder?!

Love the table! Can I ask why you didn't cut the stud 45 braces on their side and just turn your saw table to 45 degrees? Cutting at such a steep angle with your saw is a bit more difficult and ungainly. Love your his and work!!!

Ana!!! You should consider selling piece. I would totally buy

Ana, I need a drop leaf table that, when the extensions are down, is no more than 12 inches. When the leaves are up, It should be about six feet long. Probably a width of 40-42 inches. I live in a small space and need a work table for my sewing, which also serves as a dining table. Thanks.

If I wanted to make this taller like 3×6ft what size wood would do I need? I want to make this stand for my daughters urn area. She passed away last month and I'm trying to make this perfect. The sooner the better.. Thanks! Love all your work..

Nice project Ana. Turned out wonderful. Would go nice with the hall tree project as a place to throw keys , gloves , etc. So are you FB Native ? If so what Nation. My wife is FB Navajo (Dine') from Arizona and I am 2/3 white.....but I cant prove it. LOL

I would use dowels to connect the top

Nice piece. :) did you have to rip your 2x4s ?

The link Thales me to desk plans! There are over 400 plans and I can’t look through over 400 to find the right one. Can you post a better link? Thanks!

can you do a thinner one like 6-7 inches wide?

Ana, best wishes from Russia!

So I said to Sylvia... "those look like Gorman boards...." sure enough... Great to see Canadian forest products making their way to Alaska!

Does anyone know if you gave the measurements to let's say home depot if they could cut everything there for me and I just nail them in place? Never used a saw lol

Nice Madam

👍🏻👍🏻

Did you plan the wood (with a jointer or planner machine) at first?

I keep trying to guess, but who does your camera work?

It takes up so little space - this would be perfect behind a couch...

I envision this with a bunch of geraniums on it.

Ad a drawer 😊

👍

Wait a minute... I bought this EXACT table from Wayfair for $115 lol...