Firstly I meant to say 120cm not 120mm in the Video sorry it's 120cm in width...

Came with no instructions, no foil tape. Bolts were mystery - even after several YTvids. YOU explained that & other details. Best video I found. Thorough & good pedagogy. You could be a teacher. Thanks.

Excellent. You work the same way I do. I have onset dementian so saving ideas like this is very helpful to me.

I've got a 3 metre one of these to put up, 3 separate sections, and that template idea will massively help.

Very helpful video. The wooden template with drilled holes is an excellent idea which made the installation sooo much easier and fail proof! Sellotaping the spirit level, also an excellent idea which helped a helluva lot! Also, I like the explanation of how those expansion bolts worked. Thank you for sharing your ideas. Great video!!

Brilliant video - just bought one of these canopies and this is really helpful learning how to fit it properly. I didn’t even know anything about the special fixing screws so this really helped me get my head around that and the template idea is so helpful as I have a 2m canopy to fit so your method will make it much easier and will get it up perfectly fitted. Thank ever so much.

Hi Andy, thanks so much for your instructions. I followed step by step and was able to complete the job successfully. I bought our single door canopy for $60, Melbourne, Australia, postage included. Looks good. Thanks again, Chris.

Thank you for tips, putting mine up in the morning.

Template idea brilliant, just fitted ours, took an hour from opening the box. Easy. Thanks

Brilliant idea with the wood template. I'm gonna do that right away in the middle of installing an eighty inch wide thanks for the tip Mate !

what a great idea, well done, saved me a shed load of time and hassle, thank you

Seen some good videos on you tube but this is one of the most useful ways of fitting anything single handed..... well done

Hi just saw your video....and I must say it is by far the best and easiest way to put it up. Top man!! Stay safe

Thank you for the instructions, absolutely helpful !!

Great video and down to earth instructions ,il be doing it on my own,that template is the best way 👍

Just bought one of these and the instructions don’t show how to put it up, your video was extremely helpful..thanks for posting it

I was thinking of making my own but after watching your vid I'm onto eBay😉 , nice one mate.

I watched your video and I found it really useful my wife ordered one from Amazon came this afternoon, it’s now up, so thanks for you tips be safe. Best regards Pete .

Excellent video, very clear and methodical

I love this idea, Andy 👍

This is brilliant. Very helpful. Thanks.

Great idea for the wood template i got mine yesterday and going to install it tomorrow thanks for the tip.

Good tips! Will help me putting up a very similar canopy - thanks very much

Great video and perfect ideas all round, you made it look so easy. I liked and I subscribed. Thanks a millions

Thanks a MILLION!! GOD Bless you always

Just got mine, you were a great help. Abit of a struggle by yourself.

You sir are the man!! Thanks

just put mine up, got it right first time thanks to this video :-)

Thanks a million for your video....very very helpful for a DIY dummy here!

You saved my sanity and my son from killing me. We have a 10 foot awning (4 brackets, 3 panels). It came with lame instructions and none for securing it to siding. We put it together first, then tried to mark the holes by holding it up and marking the siding. It was horribly awkward and one end fell off despite my caulking the panels to each brace. We laughed a lot. But seriously, the panels aren't secure and easily come unseated. So we'll take your advice from another video and use caulk in the bracket channels to secure each panel. Our panels were cheap and came in 2 sections that were spliced together with a plastic bracket. Don't get those! The corrugated panels should all be one piece. I'm ditching the cheap panels and buying corrugated sheets from the hardware store. I've never used those anchors so thanks for showing how you installed them. Very good video!

Thanks for sharing the information, very well done.

Thanks for your video, am going to buy one of these.

Nice work Andy. Looks good

Thanks for this video. I have just bought one and this will help me to make a good job of fitting it. They say that the instructions that come with it are not up to much. CHEERS!!

thats a great idea...thank you for sharing the video

Thanks mate this is very helpful.

Nice one I was going to do it simular but yours is better thxs

Great video .. very specific love ir

great video- thanks -I'm about to put a canopy up myself.

Belting tips on the installation pal. After reading the comments. I will also be gluing the parts together for extra rigidly. Storm damage prevention. Good idea using the wooden jig. Perfect drill holes. Bet you were well chuffed after installation.

Brilliant solution! I'm going to use it to install mine!

Spot on video 👍

Thank you for sharing this video! I didn’t know how to use that installation screw until I saw this! I thought they gave the wrong screws!

good job mate

cool vid mate well done

Very helpful 👌

Outstanding

Been pondering how to do this without involving the wife. Cheers :)

Thx for posting, gave me confidence to do it myself. You didnt mention you had a cup of tea around to help think things through ! :-) . Maybe add how it fared through the winter ? I want one to stop me getting dripped on as I unlock the front door, so maybe I'll find one with a lip on the front edge to direct water off to the side.

good work

I switched out the dynabolts for galvanized screws and plugs, have had them rust and blow out the bricks before

nice video mate. cheers👍

Nice job

You did well. I can not screw into the holes and did not grip into the wall. How can I fix it?

Thankyou , for that. I am now just unsure how the princpal of the bolt works as it currenty stands the 10mm bolt just loosely slides in and out of the hole i drilled, therefore I am unure why the need to hammer in . Also since the bolt doesnt stick in the 10mm wise hole i am unsure how ot would tighten

good idea

Best template ever…

Nicely done, I've just got one and will be putting it up tomorrow, now where's that bit of wood.......

Thanks for the vid cheers mate

Thank you so much. I tried to install mine today but got stuck with the screw to the wall part. Can’t figure out how to use that kind of screw. I finally gave up. Tomorrow, I’ll get back on it and hoping I don’t need my husband’s help. 😅 Good luck to me.

Thanks. I was looking to find what size drill bit to use for the anchor bolts. The instructions that came with my pack didn't have it.

Can also use masking tape instead of wood. I've always used this method for hanging picture frames.

Please advise how wide and deep the drill hole needs to be for the bolts to go in thanks

Great work ! What did you use to seal the gap between the wall and the canopy ?

What kind of bolts are those?

Hi, how long does the drill hole need to be for the bolts to go through, also is it 10 mm drill bit i uses ?

Wondering are these awnings, cheaply made, wondering how long rhe woild last in the outdoor elements

If you can't attach them, you can use them as hang gliders.

It will be very help full if you have add the drill bit size you use to make the holes

I read your responses and found that you used a 10 mm bit for the hole. I'm assuming that the bracket screws should be snug with putting them in the hole in order for it to expand properly. Am I correct? In addition, what if you are attaching to a mobile home?

did you seal the edges of the polycarbonate sheets with tape or silicone before you put it together,cheers

Good job. A bargain too

Do you have strong rainstorms where you live? I am considering buying one of these but I live in Florida, worried about durability.

i just install ome today 190cm wide very tiring lol, its also for the dog

How did this handle uk stormy weather. I am debating getting one but not sure how strong they are?

Thank you...can you tell me how wide the door is... How did you know what size canopy to order

Do you know if I can trim the side of the canopy to better fit my door frame?

Did you put any kind of sealer between the canopy and the brick wall.

Can you combine more than one kit to make a bigger awning?

What size drill bit did you use to make the holes? Excellent video btw

Would you know what size the bolts are? I’ve ordered one of eBay but none of the fixings were included.

What is the size of the drill bit yo use? How deep do you drill holes?

Would it be the same principle if I purchased a 6 foot or 8 foot one ?

will those bolts work on plywood and would this canopy work on aluminum siding?

How does it hold up with the weight on snow on it?

What are they like in a wind?

Hi do you need plugs in holes

nice jod

Does the door open as it should ??? you didn't show that part

i was a bit scared for a second that he might try drilling into the lintel

Got a Link to where this is on eBay?...Do they sell a tinted plexi-glass version?...That clear one must look a bit grubby very quickly and probably scratches every time you clean the top side of it too.

Where can you get It

Goodness gracious!! I have a hard time understanding what he says!!!

How do you know all this stuff lol

do not bother, i bought one 150cm width. first real storm we had the panel blew out. i put it back, next time we had a storm it blew out again. waste of money.

How much cost?

Why didn't u just use the cardboard for template 😆

Good idea but I'm sorry to say your house need a good scrub.

I’m hoping that bowl of nasty water isnt for your pup

You should watch a video about how to make a good video 😂