Easy way to Install a Freestanding Tub- Part 2

Рет қаралды 269,159

4 жыл бұрын

Easy way to Install a Freestanding Tub- Part 2. This video shows the installation and setting of a freestanding tub and tub filler. Universal rough-in components make it much easier to install a freestanding tub. Using Delta Faucets tub filler rough-in "DR4700" and Jacuzzi "JMZ-20000", the trim can easily be installed without disturbing any of the other finishes or connections from below the floor. Watch this video to see how simple this process can be.
To see part one of this video series, click on this link. • Easy Freestanding Tub ... . It will show how I installed the rough-in components.
Please leave your comments in the section below, or leave me a message on instagram @tilecoach.
If you are new to the channel, welcome and I look forward to you being part of our wonderful community here...where we teach, learn, and inspire.
If you are struggling at life right now- I understand. Life is hard and I have been where you are. Just remember- it's always darkest before dawn, and you are one decision away from everything changing. Sometimes it's just a matter of letting go of old ideas, traditions, and attitudes that were impressed upon us as children.
I love you, I love being your tilecoach, and I'll see you on the next video.

Пікірлер: 224

@tankdeezel76 Жыл бұрын

This little kzfaq.infoUgkxVoi3B4CB6Oygq1-vo4OTL1M_M5JkrXif tub works perfect in our 6 x 6 shower and is easy to get in and out. Also easy to drain.

@Tatman1212 4 жыл бұрын

Again Isaac, you relate very well to the average Joe. You communicate on a level we can all understand and you NEVER come off as condescending or as a “know-it-all”. I wish all contractors were as humble. God bless.

@mgscheib 4 жыл бұрын

I just install this drain for a freestanding tub. It was great to see you install the tub and drain assembly. That is my next step! Thanks for all of your videos and positive vibes!!

@MsBeasley0783 3 жыл бұрын

This is super helpful since I am planning to install a freestanding tub in my Master Bath end of this year. I have to do this on my own. This gives me much more comfort/confidence.

@Klevra96 3 жыл бұрын

Really appreciate you taking time to teach others the right way things are done.

@c.jordan1320 Жыл бұрын

Thinking about 5 things you're grateful for is a winner! Good tip. Change the way you think, can change your life! Very thorough video, I don't usually do the plumbing on my remodels, but the customer wants to keep her freestanding tub so I might as well learn. Thanks a lot 👍

@jeromestsauver 3 жыл бұрын

Putting in my free standing tub and this video gave me the extra confidence to get after it.

@openyourmind742 4 жыл бұрын

Thank you for the small details but very significant in performing these tasks in your videos.

@buyontrust 2 жыл бұрын

Thank you guys for making these videos, especially for showing both that its okay to make mistakes, and why its important to see where those mistakes are before finishing a job! I'm in Colorado and learned several keys from you: 1.) Measure and measure again before cutting because the placement of the fill spout needs to be dead-on accurate and hang over the tub some, 2.) Buy a pipe cutter to fit inside the down drain, 3.) there are different types of cement for different types of pipes so I need to know what type of pipes I will be working with, 4.) Rough-in the drain first (using a rough-in tool like the Delta Faucets tub filler rough-in "DR4700" and Jacuzzi JMZ-20000, then install finished flooring, then install the tub with drain assembly, 5.) Use plumbers putty as it makes for a better seal than the manufacturer gasket, 6.) lube up down drain, washers, and be careful to not over-tighten hand-tight fittings, 7.) check to make sure there are no leaks before caulking in tub. These are more for me to reference to haha, thank you again!

@herbmartindale7018 3 жыл бұрын

This is one of the first videos I've ever subscribed to, I just want to thank you, for explaining things that anyone can easily understand. I love your work. You've helped me, slot. Two thumbs up

@evillemonkey 4 жыл бұрын

Thanks for videos like this where it’s a little outside the comfort zone for some of us tile guys where things like this we would end up telling the customer to get a plumber. Thanks!

@toemblem 3 жыл бұрын

Greetings from San Diego. Thank you for the videos and thank you for showing the minor mistakes. We all make them and it helps to see it happen so we can try to skip doing them. Keep up the good work.

@datsall4now 2 жыл бұрын

really helpful video. I just rebuilt my entire bathroom and put in a free standing tub. I ordered the drain assembly and it made the job easier. I had to relocate my drain about 3 feet. I had to bust up concrete floor because the tub we chose was a center drain. The end result was worth the work,

@MrVampiro82 3 жыл бұрын

That's what I love about some of your videos, you don't edit them and we are actually looking at the mistakes you do over the installations and that help us NOT to do the same. Best regards from San Francisco Ca🙏🏼

@jocaraway 2 жыл бұрын

You are such a knowledgeable and upbeat guy!!!

@image662 4 жыл бұрын

I’m grateful you made this video!!!

@a.randolph8112 4 жыл бұрын

After watching your vids I've decided not to do a custom shower in my tiny house, instead I'm doing a standalone with shower. This vid is hugely helpful. Thank you!

@dalewoodiel3572 2 жыл бұрын

Great instructional video. I appreciate the time you take to film and share for us DY’s.

@DanR-vh8bt 6 ай бұрын

Thank you for this video. We had a house built 2 years ago and have had moisture and bugs coming out from under our free standing tub. After watching your video I understand why. The margin around the drain was exposed allowing moisture and critters to come up from under the slab. Also, the drain was installed with no gasket or plumbers putty which allowed water to leak under the slab, and lastly there was no indication that the drain tube was lubricated before installing. Thanks to your video I'll be reinstalling the tub the correct way!

@LokiStyle34 3 жыл бұрын

Great videos, this one alone gave me the nuts to install one of these by myself.

@abelalvarado276 2 жыл бұрын

Installing the valve base video will be really helpful, thanks man God Bless you and your workers

@jamessprow7116 4 жыл бұрын

Isaac I know you know what you're doing all the time I noticed lately some products insist on no plumber's putty. I love your work and your videos.

@sliqu7946 3 жыл бұрын

You are the man brother!!! All you’re vids are great!

@FJVillar91 4 жыл бұрын

Thia video came at the perfect time. Thanks!!

@queensmarine6506 4 жыл бұрын

Thanks Isaac, great video!

@neriortiz3978 4 жыл бұрын

GREAT JOB, WELL DONE EXPLAINED

@codylister7964 Жыл бұрын

You’re awesome dude. I always love your videos and they’re insanely helpful and easy to follow.

@maddys9782 Жыл бұрын

Excellent video--thanks much for this and all of your videos!!

@neilshupak8603 2 жыл бұрын

Awesome drain fitting..ordered one today !

@camselkirk7248 4 жыл бұрын

Thank you so much for making this video. I really needed it and it helped so much! You've earned a subscriber for life man! Awesome work!

@jke2125 4 жыл бұрын

Where did you buy the kit?

@winstonbachan9884 3 жыл бұрын

I appreciate and love your video and skills!!!!

@marylouswihart3622 5 ай бұрын

Awesome video. You are a perfectionist which is expected.

@jeromestsauver 3 жыл бұрын

Great channel Tile coach!

@JC-ts7tc 2 жыл бұрын

Lube up the pipe real good bro! Appreciate you making this videos man. Learnt a lot! Keep up the good work 💪🏼

@westcoast6645 2 жыл бұрын

I like the lubricants part it makes it easier for the pipe to slide in 😄

@fidencioyoucanbuyinlowesor4672 3 жыл бұрын

Thanks man for this video master God bless you 🙏

@lockwooddave 4 жыл бұрын

One thing I'm always grateful for is the good people spreading positivity throughout the world. Thanks Isaac!

@lucybelcher5918 3 жыл бұрын

Great videos. Learned alot

@danielharris5343 Жыл бұрын

Great video man!!!!

@helloworld-ow9tf 2 жыл бұрын

That jacuzzi thing is genius design

@realgamer1789 6 ай бұрын

This guys lubed up a few pipes. He has a great technique

@andrealaphilippe5926 Ай бұрын

Isaac, if you install one in a blue moon, it’s worth getting this rough in; however, if you install quite a few a month, those rough ins at 200$/pop adds up really fast. You can use a trap adapter at 5$ a piece instead of the rough in, lift up the tub and drop it on 2 batteries or whatever blocks you have, enough to slide your hand under the tub and tighten the trap adapter nut . Then at the same time, slide out the blocks with your helper and drop the tub in. Don’t forget that floors are never 100% level, those tub feet need to be adjusted at 1/8” or so from the floor and the tub should be dry fitted to make sure it doesn’t wobble. Put silicone over the feet and drop the tub in. Adjust , fill the tub with water half way and open the drain. That’s how you check for leaks… Code says the tub has to be completely sealed to the bottom. So use your choice of sealant and seal the entire perimeter or as much as you can.

@Gallo903 2 жыл бұрын

Thanks man!!! Is all I can say!!

@osorom8016 3 жыл бұрын

Amazing master

@mikes8989 4 жыл бұрын

Nice vid I find it good to check tightness after removing some plummets putty because some times it seems tight but the putty wasn't finished coming out 😅

@Aepek 4 жыл бұрын

4:40 In a pinch, 2 long screwdrivers will work also for holding the drain assembly from spinning (when the drain wrench doesn’t fit, lol). Have always used plumbers putty, which is what i was taught as an apprentice long ago, & I still prefer using even today......as it just works good💪🏼 A other tip for newbies, make sure your tub drain protective plastic is removed before installing drain (if the tub has a protective “plastic cap”.....cuz ya don’t wanna make that mistake 😂). Thx for the tips Isaac along w/ the vid. Enjoyed watching & learning about some new hardware “assembly”👍🏻 Cheers ✌🏼

@danpants8218 4 жыл бұрын

Needle nose pliers work even better especially when working by yourself, 1 hand on needle nose and 1 hand on channel locks

@Aepek 4 жыл бұрын

Dan Pants Thanks for the comment, & tip. Will give a try next time. Have a good one✌🏼

@MrTooTechnical 4 жыл бұрын

great vid. i would have used silicone one the inside and underneath the drain assembly to absolutely ensure zero leaks. i love silicone and stabila

@TwoTracksOutdoors 4 жыл бұрын

Great video highlighting the Jacuzzi JMZ-20000 tub drain rough in. I assume you had to remove the included drain assembly that came with the tub(I've found that most free standing tubs come with a preinstalled drain and flex drain tube of some sort). Great fix for easier install using the Jacuzzi rough in, allowing for easy connection of tub to drain. Good product but, after checking pricing, was surprised to see how expensive it is. Also, love Delta and their rough in valves but again, you need to have deep pockets to afford any of their tub fillers in any finish. Many of them are priced at well over $1000.00. Customer needs to do their pricing research on various brand's rough in valves and tub filler combos before installing a rough in valve. They are not interchangeable between brands, unfortunately and there is a wide variance of pricing among manufacturers. My suggestion would be to choose a tub filler first and then match up with that Mfgs appropriate rough in valve before installing same. This was one of the most thorough tub install videos I have ever seen. Much appreciated.

@rockycon1967 4 жыл бұрын

Great instructions, Love your vids..Tub is just missing a wine caddie!

@travisk5589 4 жыл бұрын

People who drink wine in the bathtub tend to pee in the bathtub.

@nexhathalimi476 4 жыл бұрын

great video man your are the best tiler on here also wish you made a video of how you did the plumbing for the tub filler from begining and how far is the distance have to be from the drain hole to the filler pipes

@chuckjohnston6186 4 жыл бұрын

Great video , as a plumber myself I would have used the washer with the bath waste on the inside off the bath and a small amount of clear silicon and also I would have filled the gap on the bath waste under the bath , keep up the good work and a happy xmas to you and your family ✋️

@timkimone 10 ай бұрын

Look good and pro ..

@kenhoward127 4 жыл бұрын

I really like that tub filler both in style and the way it installs. Then I wandered over to Delta's website and saw how much it costs... ouch! $2170 MSRP plus the install kit for $248. Not cheap, but probably worth it. I see HD has it for less than $1600 and the rough in for less than $200.

@kaylavenezia1079 2 жыл бұрын

We paid much less for everything. We ended up going with a entirely different faucet and i listed all my parts for cheaper on ebay since home depot would not take back "online orders" even though they were new in box.

@jamesallen5824 3 жыл бұрын

Love your videos. I need to know how this tub gets secured. Thanks in advance.

@jedcazier8711 3 жыл бұрын

This particular tub doesn't get secured by anything other than the rubber feet and friction. Personally I like the two-piece applications that allow you to screw it down.

@tonygammalo5602 4 жыл бұрын

I’d add a small amount of teflon tape. You can put it where you don't see it after tightening. Helps prevent leaks.

@snoodle877 2 жыл бұрын

I'm greatful for you man! I'm putting in a freestanding tub this summer. Can't wait to talk to you as I signed up for an hour coaching session! My question will be, over concrete, to waterproof the floor, do I ditra over the drain fixture or put the ditra under it or just cut the hole in the ditra for the drain? Your the best!!

@SoilentGr33n 3 жыл бұрын

Some bathtub drain kits include those metal extensions and if you don't need it, the threads will screw directly in a standard ABS drain

@pukeschannel6882 2 жыл бұрын

You might like plumber putty better, but in situations where plastic (a main component of the plastic is solvent and/or oil of some sort) is involved,...the oil in the putty can and will leech out through the plastic (this is a known fact) over time. Over many years, there is not a track record one way over the other as to how the old standard plumbers putty will do with plastic,. But it is known that silicone hardens much like a catalyzed substance. So once it is hard, it's done and you don't have to worry what will happen over the next few decades. Thank you for the videos.

@karlandkathleenklingelsmit933 3 жыл бұрын

Thank you for this video. My wife wanted the freestanding tub, but I wasn't sure how I was going to connect the drain without cutting a hole in the ceiling below. One question, is it possible to ever pull the tub and drain back out if you ever had to get to the trap for some reason? It seems like you could, but has anyone ever done this?

@swburke21 3 жыл бұрын

I only wish I had watched video one prior to roughing in my tub drain and tiling...but because of video 1 and 2, I was able to correct my mistake and successfully install my freestanding tub! Any tricks for leveling the tub with the adjustable feet?

@zdeneklesa4046 7 ай бұрын

Tile guy ...pls.dont mess with plumbing😊!

@tkeo2 3 жыл бұрын

Great video - will be installing this tomorrow...very helpful. Anyone consider filling the air space of the acrylic free standing tub with bat insulation to keep the water a bit warmer longer....worth it or a waste of money and time?

@askthisoldtileman5401 4 жыл бұрын

Get a real plumbers wrench from plumbers supply house. Is all yellow Handel makes a difference. Just a thought, coach👍

@alexandrap4753 2 жыл бұрын

Thanks for the video. Could you please tell me how to adjust the hot water? The rational limit stopper thing? Thanks!!

@sfboy888 Жыл бұрын

Thank you for the useful video. Do you have any videos on how to install a freestanding tub inside a shower room? Just wondering what are the considerations and extra steps needed for waterproofing.

@andreitsourkan9495 4 жыл бұрын

Great video! One thing I wish you explained, is how to drain the tub.

@reemnayal 2 жыл бұрын

Good info! So for this type of installation, in case you need to perform any maintainance, the drain simply slides off, correct? We are installing the tub filler behind the tub where the area will be a little tight for any future maintainance of the tub filler, so with this method, looks like we can simply remove the silicone from around the tub and slide the tub out to access the tub filler, correct?

@jfgrivard2 3 жыл бұрын

putting the gasket on the bottom part of the bath will not prevent water to seep through the threads of the assembly. So if the bath overflows it will fill the bottom of the bath pan (i.e. pan under the bath that takes the overflow water to the drain slits) and find its way through the threads of the pipe assembly and leak out around the pipe threads. I'm even thinking that when the main drain action goes the slits on the side of the drain assembly (which were there for the overflow in principle) might also drip water outside the main assembly to the bottom of the bath pan the same way, which will lead to the threads leaking again.

@kenmiller9327 4 жыл бұрын

I am putting in a free standing tub on a concrete slab and need to order a tub and tub filler but not sure of the best path forward?

@dmorrone111 3 жыл бұрын

Great video! I'm about to tackle the freestanding tub... Does the tub get glued down to the floor? What tub model is that? Thanks for all the confidence you give me! Damian from NJ

@rbnjr 3 жыл бұрын

some plastics react to chemicals in plumbers putty and manufacturers provide warnings which is why the silicon gasket was supplied.

@cherylpopescu1590 3 жыл бұрын

What prevents the water from coming back up the Drain line once you drop that brass pipe into it? especially when you have a full tub of water and release it all at the same time?

@extremewhitetail837 3 жыл бұрын

Isaac thanks for your videos. Very informative. I have a big question. I am installing a large walk in shower with a relaxation tub for my wife. I will be making the traditional mud shower pan and then tile. Can a freestanding tub faucet be installed on a mud bed. It will be in the corner a way from the shower water no not susceptible to constant water. I can't find any videos. Thanks

@stevemun9730 7 ай бұрын

thank you for the video. we had a contractor install the island tub using this system. unfortunately the tub shifted and there is a small leak. can you tell me if the red part should be loose?

@willinthearea6318 4 жыл бұрын

Does plumber's putty really work? I always use 100% clear silicone. Great job though. Looking good.

@michaellagzdins8002 3 жыл бұрын

Can you make a video on how to install a tub filler over concrete?

@TheReddangie 4 жыл бұрын

Is it difficult to move a tub drain and expensive on a second floor bathroom? Taking out a jetted deck tub to freestanding jetted tub and I want to reposition it. Thank you!

@kerriferrari4942 3 жыл бұрын

Would you use some tape between the brass pipe and the plastic rain on the tub? I always use tape but perhaps I over-value tape in this situation?

@jw1731 3 жыл бұрын

I got the same drain kit over a year ago but am now finally getting around to installing the tub. I may have lost the lubricant or it wasn't included. Is it a specific type of lubricant that it has to be, and where can I buy it? Thanks in advance.

@reezo619 4 жыл бұрын

Good video i like how youre not afraid to admit your own mistakes on video and correct them accordingly its hard for alot of contractors to do that they'd rather blame someone else

@lockwooddave 4 жыл бұрын

I don't sub many accounts but Isaac earned my respect long ago with his honesty and humility. He seems like a great human being to me.

@srserpicol 3 жыл бұрын

What an awesome video... thanks, but how do you apply those techniques to a cement slab?? Cutting a drain and fitting a tub does not seem as easy...

@detectivekimble6932 2 жыл бұрын

Is this floating LVP? Did you silicone the edge of the tub to the LVP? I can't find a definitive answer anywhere on this.

@soco405 Жыл бұрын

Great video! I lost the lube, does anyone know what replacement lube I should use?

@hansgrober1058 4 жыл бұрын

Hey Isaac...how do you secure the tub to the floor? Is going to pivot around the drain point...left or right...if I glue those four legs......I will never be able to take the bathtub out in one piece...Thanks

@CaseyEricson 2 жыл бұрын

Issac, do you mind sharing the make/model of tub filler you installed in this video?

@yvettereeves1894 3 жыл бұрын

I'm taking out my fiberglass tub shower combo and putting in a freestanding tub. However I can't get one of the faucets off because once I pulled off the faucet tab, there's a pin under the faucet tab I can't get out. It doesn't have an Allen wrench hole. Do I need a special tool? It's a Moen faucet.

@nikbraccio2826 Жыл бұрын

hi after you dropped the tub in place what keeps the tub from moving ... how is it anchored to floor ?

@danpants8218 4 жыл бұрын

What happens when the p trap gets clogged and water starts backing up? Isn't there a good chance that water will come up between brass pipe and PVC. So you are just hoping that grease on brass pipe is enough?

@controlsengineer 2 ай бұрын

This video was really helpful, thank you! Do you use anything to keep the bathtub from moving on the floor once it has been placed? Such as should you put a silicone bead around the base of the tub on the floor?

@realtortarrah8682 3 жыл бұрын

Hi, Great video! What kid of tub was installed in the video? I have a client looking for a similar style. Thanks.

@gajillion 3 жыл бұрын

Any thoughts on installing a 400lb stone tub? There's no way two people are going to pick it up and place it precisely.

@genxhustler Жыл бұрын

I have a similar spout but the water doesn’t get hot enough.. how do I modify the water to have more hot water come out?

@TheMrjt09 2 жыл бұрын

The drain on my freestanding tub came preinstalled. It’s a Vanity Art from Home Depot. Should I pull it out and use plumbers putty?

@BouncingBaller 4 жыл бұрын

How do you keep the tub from moving? seems as though it's just sitting their. I'm installing a freestanding tub in the next couple of days. Still need to figure out the water supply thing first. I just removed a 1980's garden tub. What a pain it was to remove and the water piping is another story.

@melissaalhezayen4108 4 жыл бұрын

Gil Galaxy you add some silicone caulking to the bottom of the tub and the leveling feet to prevent it from moving. Place a bead of clear silicone caulk all around the base of the tub (you do not want this to be visible, so make sure you don’t put it too close to the edge of the tub). Don’t forget to caulk the leveling feet. Make sure that the tub is flush to the floor and level before you caulk it or the leveling feet.

@escapism2to1 3 жыл бұрын

I was wondering the exact same thing. Thanks so much for asking the question... and @Melissa Alhezayen thank you for the reply!

@ColoradoCanyonEnthusiasts 3 жыл бұрын

@@melissaalhezayen4108 how do you do this once you’ve placed the tub? Seems like you can’t really lift it anymore with the way the drain is. You have to apply the silicone before you drop the tub?

@derekmcdowell2547 3 жыл бұрын

I’ve hooked up multiple free standing tubs but all had over flows witch meant I had to cut drywall ceiling below to ensure the drain was connected properly I wish all free standing tubs had just straight drains no over flows great vid

@duanelundell4257 4 жыл бұрын

That drain part is a little pricey but works great

@jameslydon3314 2 жыл бұрын

Do you need to caulk the base of the tub to prevent it from being bumped sideways?

@TufRiverboards 4 ай бұрын

What do you cut the brass down with when its to long?

@gregoryrivara9003 Жыл бұрын

I think I tightened the brass downspout too much. The plastic seal between the brass downspout and the drain squeezed out inside the pipe just a bit. Can I pull the tub out from the rough in and fix the plastic gasket seal and re-install tub into rough in?