EASY ZBRUSH - UV / UNWRAP - USING UV MASTER PLUGIN

  Рет қаралды 177,954

RaveeCG Tutorials

RaveeCG Tutorials

7 жыл бұрын

UV / UNWRAP - USING UV MASTER PLUGIN
raveecgtutorials.gumroad.com/...
Easy Zbrush explaining shortcuts that I use in most of my projects. Hope you find it it helpful!
Donate if you want: www.paypal.com/cgi-bin/webscr...
Hope to enjoy it!
if you like, so these movies pop up in searches.
Thank you again
GoPro that I use : goo.gl/EOTur7
Camera that I use over 2 and half years now: goo.gl/fqKHYr
Lens: goo.gl/B4hmtl
goo.gl/r1Cuom
Card: goo.gl/4h8a0w
Time to Time Fun with: goo.gl/ADXBN8
Microphone : goo.gl/b6AY2I
Book that I read right now: goo.gl/Ybj52s
I recommend this albums: goo.gl/vtktxJ
goo.gl/M2RXDc
goo.gl/9kzwJn
Follow me on FACEBOOK:
/ raveecg_tuto. .
Follow me on INSTAGRAM: / raveecg_tut. .

Пікірлер: 169
@peterlucier7756
@peterlucier7756 7 жыл бұрын
great simple explanation! thanks man i really appreciate these kinds of videos when you need quick answers
@oswaldcobblepot764
@oswaldcobblepot764 6 жыл бұрын
Exactly what i was going to say. Quick, simple, exactly what i was looking for without going into 20 mins of tutorial where 90% of the explainations are useless.
@ooedoranvu
@ooedoranvu 7 жыл бұрын
Thank you so much for this! My teacher just gave a super fast explanation so all I had was notes that I randomly wrote down... did my UVs in maya before sculpting, but apparently I left one part out. Was at a loss on how to do UVs in zbrush, but you gave me perfect understanding in just 2 minutes. Even better than learning in class... :D
@allenal1839
@allenal1839 7 жыл бұрын
awesome! straight and to the point! Watched over half a dozen videos for over an hour and did not find what I was looking for until I came across your video!
@AkinJanet
@AkinJanet 6 жыл бұрын
hey bro l just watched tons of unwrap tutorials never get happy till yours, great effective, simple and best good result
@RaveeCG
@RaveeCG 6 жыл бұрын
Thank you!
@MrSoulast
@MrSoulast 6 жыл бұрын
Amazing!simple and quick!that all what I just need it!Thank you!
@Jimzip
@Jimzip 4 жыл бұрын
That was great! A quick and simple tutorial which helped me a lot. Thank you!
@STILLTHINKING656
@STILLTHINKING656 6 жыл бұрын
This video is perfect for me. Cuz so simple. Some other video is too long and include too many things which makes me dizzy. Thanks for this video
@DavidAllen_0
@DavidAllen_0 5 жыл бұрын
Amazing quick and simple explanation! Thank you!
@AkashKumar-ty3qn
@AkashKumar-ty3qn 6 жыл бұрын
direct to the point! saved a lot of time. thanks, dude 😁🤩
@d00dlefreak
@d00dlefreak 4 жыл бұрын
Thank you for this quick, simple explanation!
@cosmicechoes42
@cosmicechoes42 3 жыл бұрын
Damn, short and really helpful tutorial, lul ! I came here after 15 minute tutorial, and I learned more things from this video.
@AlmightyPolarBear
@AlmightyPolarBear 6 жыл бұрын
Only more teachers need to be like this. Everyone will learn so much better. :)
@JesusCondeArt
@JesusCondeArt Жыл бұрын
how do i leave the uv master tool tho, its all great until i dont know how to go back
@RaveeCG
@RaveeCG Жыл бұрын
Uv Master will create another Subtool, just go back to original Subtool where you have your peoject!
@Alexander-em7kn
@Alexander-em7kn 4 жыл бұрын
Awesome, you are good at teaching man. Thanks a lot, it was really quick and helpful.
@rsunghun
@rsunghun 5 жыл бұрын
wow. Such a quick effective tutorial
@ayan6174
@ayan6174 7 жыл бұрын
nice quick and easy...thanks RaveeCG Tutorials..
@yuxiaoliu2989
@yuxiaoliu2989 4 жыл бұрын
This is the best and easiest UV unwraping Video ! Love your video! :)
@badboycg144
@badboycg144 6 жыл бұрын
I was sure to find a video on UV unwrap on your channel . This is my today's lesson . Thank you so much . Now i will watch your video of Carey turtle when you paint the UV texture map in photoshop and apply it . Let's see how i will do it , haha .
@martinoneill7116
@martinoneill7116 5 жыл бұрын
After coming from blender. This is like a gift from God.
@RaveeCG
@RaveeCG 5 жыл бұрын
😆
@Robinssoncravents
@Robinssoncravents 3 жыл бұрын
amazing tutorial....quick, simple...enough!
@Andydemelo
@Andydemelo 5 жыл бұрын
I subscribed!! thanks alot bro! Quick and to the point!
@AbhiMoz
@AbhiMoz 5 жыл бұрын
Will you show the UV mapping for the entire model. It'll be really helpful and it's a gorgeous model
@gabrielherrera6651
@gabrielherrera6651 5 жыл бұрын
Great tutorial, thank you!
@im_crisl50
@im_crisl50 8 ай бұрын
amazing tutorial, simple and effective
@jfcomposition
@jfcomposition 5 жыл бұрын
Master of 3d !!
@moncefouubahi
@moncefouubahi 10 ай бұрын
fast simple and very usefull ! great thanks
@ShuvrodeepDutta
@ShuvrodeepDutta 4 жыл бұрын
this was very helpful. thank you!
@rafaelquintero7148
@rafaelquintero7148 2 жыл бұрын
Thank you. it was very simple and very useful for me
@frankcastle472
@frankcastle472 3 жыл бұрын
Thank you! This helped me out so much!!
@spector969
@spector969 7 жыл бұрын
Thanks dude, very simple and helpful!
@RaveeCG
@RaveeCG 7 жыл бұрын
Awesome to hear this!
@grimventures
@grimventures 3 жыл бұрын
Great tips, thanks very much for sharing
@crtmojo2705
@crtmojo2705 7 жыл бұрын
Quick concise and awesome. Thanks for the video.
@RaveeCG
@RaveeCG 7 жыл бұрын
+CRT Mojo Not perfect, but I am glad that you found it helpful!
@crtmojo2705
@crtmojo2705 7 жыл бұрын
I'm using it right now to unwrap some pieces of a tavern. It's soooo smooth. Way easier then Maya!
@aqibamin7665
@aqibamin7665 7 жыл бұрын
That's Great, keep up the good work!
@375kg
@375kg 3 жыл бұрын
Thank You! very good description!
@Cactuspractice12
@Cactuspractice12 7 жыл бұрын
Great tute, cheers my g.
@tahershowkal5482
@tahershowkal5482 5 жыл бұрын
you are very funny ,thank you very much for your tutorials , excellent
@andrepeersil
@andrepeersil 4 жыл бұрын
straight to the point, thank you :)
@Matrinique
@Matrinique 2 жыл бұрын
Great video! Thank you!
@yaroslavb.2589
@yaroslavb.2589 6 жыл бұрын
thanks very cut tutorial without waste information
@upendhrad4344
@upendhrad4344 5 жыл бұрын
Gud mate very helpful
@angiemon897
@angiemon897 6 жыл бұрын
thanks, that helped without dumb wasted minutes of someone explaining how to open zBrush :) (not what I'd do first if I were to first open zBrush, how to do the UV, lol, dunno what some people think)
@RaveeCG
@RaveeCG 6 жыл бұрын
+angiemon Glad that this tutorial helped you! Well, I do try to be concise.
@papowart
@papowart 3 жыл бұрын
thanks! I was trapped doing it manually, but your video saved me
@RaveeCG
@RaveeCG 3 жыл бұрын
Glad I could help
@TuisManko
@TuisManko 6 жыл бұрын
pretty useful thanks!
@Relivino
@Relivino 7 жыл бұрын
Nice! Are you about to make also a retopology tutorial using ZRemesher/Topology Brush/ZSpheres?
@RaveeCG
@RaveeCG 7 жыл бұрын
Thank you for your comment, I can add this for my next video!
@Relivino
@Relivino 7 жыл бұрын
Don't mention it. Keep up the good work! :)
@freddrabble
@freddrabble 5 жыл бұрын
great video!
@mhayakally4599
@mhayakally4599 6 жыл бұрын
Ugh! i love you so much! Thank youuuu ♥
@RaveeCG
@RaveeCG 6 жыл бұрын
😀 you welcome!
@honeybadgerftuw
@honeybadgerftuw 5 жыл бұрын
great king
@ZainKhandesigner
@ZainKhandesigner 7 жыл бұрын
Very nice, not complicated at all but still does the complex job easily :)
@RaveeCG
@RaveeCG 7 жыл бұрын
+Zain Khan Indeed!
@vinhannguyen9919
@vinhannguyen9919 4 жыл бұрын
thank ! it's so useful
@tanvinawale2134
@tanvinawale2134 6 жыл бұрын
All u r videos are very informative,thank u for those sir,and please keep on uploading more videos on zbrush...sub🤗
@RaveeCG
@RaveeCG 6 жыл бұрын
Thank you for subscribe. I will!
@3.S
@3.S Жыл бұрын
perfect! thanks!
@rurus_rurus
@rurus_rurus 4 жыл бұрын
Thanks I'm korean animaion student. It's very helpful to me
@hanifbahari6606
@hanifbahari6606 4 жыл бұрын
Thanks for this great tutorial. What happens for the painting on the subtotal? Should I do this process before painting? I'm asking because I wanted to unwrap the UV and then make texture out of painting and finally export as FBX
@RaveeCG
@RaveeCG 4 жыл бұрын
As long as you don't change the polycount of the model, dosen't matter when you add polypaint on your mesh. Also depending on how much you change the mesh, most recommended is to make UV after you done with modeling!
@crimsonBen
@crimsonBen 6 жыл бұрын
hah! what a great tutorial! Thanks alot!
@juancayo2319
@juancayo2319 4 жыл бұрын
Thank you for sharing!!!
@blackopsone2501
@blackopsone2501 5 жыл бұрын
thanks amazing !! work
@soon-kv5rq
@soon-kv5rq 2 жыл бұрын
Nice ~ Thanks a lot~ very helpful ~
@juozaszutautas6757
@juozaszutautas6757 6 жыл бұрын
Thanks, i did find this video helpful...
@RaveeCG
@RaveeCG 6 жыл бұрын
Awesome!
@RomboutVersluijs
@RomboutVersluijs 6 жыл бұрын
Very good bro! thanks
@RaveeCG
@RaveeCG 6 жыл бұрын
Glad that helped you!
@leatherandpoemscharmyman5774
@leatherandpoemscharmyman5774 6 жыл бұрын
hi , firs of all , thx for the video , but is it possible to NOt work on a clone and work in a manual retopo ? I do not feel confortable with the loops of the clone. If the seams of the clone are not 100% the same as the LP character , I should use an extra editor to fix areas to match uv? and if I want to bake normals in external program as Xnormal for example that seams are not so clever, clone has their own seams , but not the same as the final retopo piece of the character?.
@RaveeCG
@RaveeCG 6 жыл бұрын
+Rheifuss Stripxssons Hi, if you have low topology you don't need to go in clone mode for UVnwrap in Zbrush. But for better UV, I think the best way to control it,is to make them manually in other software like 3ds max, Maya etc.
@Chaosium
@Chaosium 5 жыл бұрын
I don't wanna sound like a dick because this was super helpful and i thank you for the explanation, but holy crap your accent was so hard for me understand because I'm deaf in one ear and hard of hearing in the other, but I'm so happy you used the closed captions, thank you so much for the video and getting straight to the point of how to do it.
@RaveeCG
@RaveeCG 5 жыл бұрын
Glad that at the end you find it helpful!
@Chaosium
@Chaosium 5 жыл бұрын
We really need more people like you who actually are willing to make videos that ACTUALLY teach things and you don't just ramble on for 10-20 minutes just to show us how to do something that takes 10 seconds, thanks again, im subbin.@@RaveeCG
@ronak8637
@ronak8637 6 жыл бұрын
Thanks man
@fabriziasullivan
@fabriziasullivan 3 жыл бұрын
Thank you!!!
@waleedjohn1300
@waleedjohn1300 4 жыл бұрын
Very Helpful
@RaveeCG
@RaveeCG 4 жыл бұрын
Glad you think so!
@altberg__
@altberg__ 6 жыл бұрын
but why and how u choose exact location of attract space?
@addycool444
@addycool444 6 жыл бұрын
Thanks bro
@hafiscaps
@hafiscaps 2 жыл бұрын
Tnks a lot sir 🥳❤️
@AkashGupta-cy2so
@AkashGupta-cy2so 4 жыл бұрын
it is really helpful
@RaveeCG
@RaveeCG 4 жыл бұрын
Awesome!
@CherylynnLima
@CherylynnLima 6 жыл бұрын
when I flatten my uvs, they're completely pink-- how do i get the polys to show up?
@RaveeCG
@RaveeCG 6 жыл бұрын
Did you check PolyFrame option?
@motoadrenalin8192
@motoadrenalin8192 4 жыл бұрын
Thank you.
@Rahimi001
@Rahimi001 5 жыл бұрын
Thanks for the tutorial. One question, when I hit "work on clone", it doesn't actually lower the poly count of the mesh like it did in your example
@Rahimi001
@Rahimi001 5 жыл бұрын
Fixed my problem with duplicating subtool, Zremeshing it and projecting it to the original. Thank you for the video again
@RaveeCG
@RaveeCG 5 жыл бұрын
Did you had Divides on the original mesh? If you had, you should try Reconstruct Subsv or what you did that worked!
@marcusk9483
@marcusk9483 6 жыл бұрын
thanks
@assamilabib8188
@assamilabib8188 4 жыл бұрын
This is very helpful ! Can i paint it on substance painter properly now after unwraping like this ?
@RaveeCG
@RaveeCG 4 жыл бұрын
Yes!
@assamilabib8188
@assamilabib8188 4 жыл бұрын
@@RaveeCG Can u please make a video based on a quick workflow how to export from zbrush to substance painter then export it on blender ! Please make it your video is very useful & shortcut process to learn !
@RaveeCG
@RaveeCG 4 жыл бұрын
I have some videos of that at Turtle videos and the latest ones with Substance Painter!
@samlee5745
@samlee5745 5 жыл бұрын
thx!!!! a lot
@villlldan
@villlldan 5 жыл бұрын
thank you thank you thank youu
@abelo
@abelo 5 жыл бұрын
on point!
@omar.moktar
@omar.moktar 5 жыл бұрын
no
@muser7935
@muser7935 Жыл бұрын
thank yyou man
@seanakima50515e
@seanakima50515e 4 жыл бұрын
I hope someone can answer, When I try this method the Control painting ONLY ON THE FACE ignores the Protect and puts the seams on the front of the face. The Attract feature will not work But on every other part of the body, arms, legs, pelvis, torso etc it works. I've been at it for 3 days and I have no idea what's going on. Can anyone help?
@Rocklady1501
@Rocklady1501 4 жыл бұрын
I know it‘s been 8 months but I‘m facing the same issue now... did you find a solution?🥺
@RaveeCG
@RaveeCG 4 жыл бұрын
It happen to me once and far as I find is was because bad retopology.
@Rocklady1501
@Rocklady1501 4 жыл бұрын
RaveeCG Tutorials Will try things out! Thx for the fast reply! :))
@TigerBunny97
@TigerBunny97 Жыл бұрын
Is it saved now, or do I have to do anything to make it on the main sculpt.
@RaveeCG
@RaveeCG Жыл бұрын
copy amd paste from Clone one
@sohakelaya
@sohakelaya 6 жыл бұрын
That was great, thanks a lot for it. Just a cuestion, i did it but i got a problem, if I try to paste de Map UV Zbrush show me a problem mesage "You can´t get a optimal UV map whit the curren map UV size". Anybody know how i can increase UV map, cause non foro or tutorial say than. Thanks, hoppe someone can help me.
@RaveeCG
@RaveeCG 6 жыл бұрын
Hi, you need to go on the Tool panel and look up for UV Map and you can increase your uv up to 8192 x 8192.
@sohakelaya
@sohakelaya 6 жыл бұрын
Its do not work, i dont know if i have to encrease the UV from clon before paste to the model. I have tryed diferent ways changing UV map but its doesnt work there, i think i have to do it in UV master, it is that posible??? Thanks a lot for your help
@user-fl4wp9cu2q
@user-fl4wp9cu2q 4 жыл бұрын
thx tutorial
@wsoulless
@wsoulless 4 жыл бұрын
What's the next step after this? How do you export and import to Substance Painter?
@RaveeCG
@RaveeCG 4 жыл бұрын
Look up videos about subtance painter on my channel!
@zshawn676
@zshawn676 3 жыл бұрын
thanks...and how you go back to your high poly model..
@RaveeCG
@RaveeCG 2 жыл бұрын
Go Copy paste from Clone Model, go back in subtool to High poly podel and Paste the new UV
@zshawn676
@zshawn676 2 жыл бұрын
@@RaveeCG thank u Sir
@user-fv9gt8yf4x
@user-fv9gt8yf4x 11 ай бұрын
after you work ith clone you put the map color on low poly and others maps?
@RaveeCG
@RaveeCG 11 ай бұрын
Map color I put in high poly and paint !
@user-fv9gt8yf4x
@user-fv9gt8yf4x 11 ай бұрын
thank you
@slamtronx5834
@slamtronx5834 5 жыл бұрын
why did your work on clone button reduce the polygons?
@RaveeCG
@RaveeCG 5 жыл бұрын
I work in clone because usually I have lot of polys on actuall mesh!
@Funkinessful
@Funkinessful 5 жыл бұрын
I wish I could know this so I won't have to go and come to Maya and come back
@ClaudiaShifferLA
@ClaudiaShifferLA 5 жыл бұрын
You can use this UV for 3DMax???
@RaveeCG
@RaveeCG 5 жыл бұрын
Yes
@Anik4Life
@Anik4Life Жыл бұрын
how do you transfer the uvs from the clone to the original? please reply.
@RaveeCG
@RaveeCG Жыл бұрын
You have Copy and Paste on Uv master! Copy from Clone and then select Original on your Subtool and press Paste!
@Anik4Life
@Anik4Life Жыл бұрын
@@RaveeCG thank you!
@cr0uchingtiger
@cr0uchingtiger 2 жыл бұрын
Zbrush crashes every time I hit unwrap. Not sure if you've ever had this?
@RaveeCG
@RaveeCG 2 жыл бұрын
Try to export your mesh on a software like 3ds max, apply xform, them import in a new Zbrush and try if still crash!
@thisGuy481
@thisGuy481 3 жыл бұрын
Must be nice. Any time I do this it just erases the protect or attract areas.
@RaveeCG
@RaveeCG 3 жыл бұрын
Try to export your object as obj and import it back on a new Zbrush and try it again!
@thisGuy481
@thisGuy481 3 жыл бұрын
@@RaveeCG or export it, and uv it somewhere else haha
@RaveeCG
@RaveeCG 3 жыл бұрын
@@thisGuy481 haha, should work, I use all the time uv in Zbrush for the speed !
@raulramirez3724
@raulramirez3724 3 жыл бұрын
So how do you export the map??
@RaveeCG
@RaveeCG 3 жыл бұрын
UV Master = Copy UV and Paste UV to your original model.If you want Texture Map to be exported you go to Texture Map in Tool and New From Polypaint.
@crzymlk
@crzymlk 4 жыл бұрын
it keeps cutting my Mesh, why is that?! :D
@sarah8713
@sarah8713 Жыл бұрын
@NativeDoomPuzzleGame
@NativeDoomPuzzleGame 6 жыл бұрын
can you share UV Master plugin?
@RaveeCG
@RaveeCG 6 жыл бұрын
What do you mean?
@NativeDoomPuzzleGame
@NativeDoomPuzzleGame 6 жыл бұрын
The plug-in UV Master installed at Zbrush, i cant find the plugin on official site :/
@RaveeCG
@RaveeCG 6 жыл бұрын
The Plugin comes with Zbrush!
@Nekotico
@Nekotico 11 ай бұрын
perfect flawless explaining
@RexArtTv
@RexArtTv 6 жыл бұрын
Its not letting me paint
@RaveeCG
@RaveeCG 6 жыл бұрын
+Rex Art Hi, did you checked Rgb ? And have standard brush selected?
@RexArtTv
@RexArtTv 6 жыл бұрын
Thanks man! it worked now :)
@RaveeCG
@RaveeCG 6 жыл бұрын
Good!
@nostalgikstudio9425
@nostalgikstudio9425 6 жыл бұрын
thank you!
@Mari-cn3kc
@Mari-cn3kc 7 ай бұрын
start 0:22
@thisisajoke0
@thisisajoke0 5 жыл бұрын
you were sooo close...but then you didn't say how to copy out the uv's
@RaveeCG
@RaveeCG 5 жыл бұрын
Is it hard to do that?
@V-95K
@V-95K 4 жыл бұрын
Not working for me no matter how I paint Edit: Its fixed now, thanks for this simple but strong tutorial!
@RaveeCG
@RaveeCG 4 жыл бұрын
Not working ...what? Not unflolding?
@V-95K
@V-95K 4 жыл бұрын
RaveeCG Tutorials its unfolding and everything but zbrush ignoring painted areas, the seam doesn’t changing :(
@V-95K
@V-95K 4 жыл бұрын
@@RaveeCG oh its fixed now. Thanks for the Tutorial!
@jerodvel
@jerodvel 3 жыл бұрын
then what.. tell me..i'm stuck..
@RaveeCG
@RaveeCG 3 жыл бұрын
What do you mean?
Quick UVs with UV Master in ZBrush
10:47
FlippedNormals
Рет қаралды 113 М.
UV / Unwrap Carey Turtle using Zbrush 4R8   - Part 03
10:04
RaveeCG Tutorials
Рет қаралды 49 М.
黑天使遇到什么了?#short #angel #clown
00:34
Super Beauty team
Рет қаралды 31 МЛН
Create UVs with Polygroups in Zbrush
6:33
IR Sculpts
Рет қаралды 39 М.
Blender 4.0: How to UV Unwrap Anything
7:36
On Mars 3D
Рет қаралды 220 М.
Baking High Poly To Low Poly (Zbrush And Substance Painter)
14:18
MadPonyInteractive
Рет қаралды 101 М.
MetaHuman Animator Tutorial | Unreal Engine 5
14:02
Bad Decisions Studio
Рет қаралды 404 М.
The Secrets of Photorealism
24:38
Blender
Рет қаралды 825 М.
Easy Zbrush - Creating Skin Pores in Zbrush 2018
10:15
RaveeCG Tutorials
Рет қаралды 104 М.
How to Sculpt SKIN using TEXTURE XYZ in ZBRUSH
5:58
Jared Chavez
Рет қаралды 55 М.