EasyTeak Wood Turning Simple Tenons Plus SURPRISE GUEST!

Рет қаралды 6,329

ThePapa1947

29 күн бұрын

I turn a simple easy Teak dish and show how I use tenons hot glued to the blank.
Surpise guest at the end.
Check out Rav's channel:
/ @secondlifeofwoodturning
How I use abrasive paste:
• Five Minute Finish for...
ackswoodpaste.com/
If you found this video entertaining
Please Like and Subscribe and Share if you are inclined
The video is for entertainment purposes only
You are watching how I do things and not suggesting others should do it the way I do.
You need to know your machines and how to use them. Follow how the manufacture says to use them safely.
Look up other turnings I have done:
Dizzy Twister Turnings Segmented Turnings
Illusions
Great gift or a craft show sales
Tumbling bowls Emerging Bowls Black Locust Vase
Droop Bowl Offset Bowl Barrel of Blocks Star Bowl Bowl in a Bowl
Droop Bowl Lathe modifications Lacquer Shellac Friction Polish
Abrasive Paste Polishing Paste Wipe on Poly Black Locust Hollow Form
Multi Axis Square Bowl Siberian Elm Hollow Form
Dodecahedron Soccer Ball Sphere Olive Wood Turnings Illusions Segmented Vase
Tangent Stave Turning

Пікірлер: 139

@kevinbooth2063 26 күн бұрын

Gary thank you for the video. It is wonderful that we can get to know people that we meet over KZfaq.

@ThePapa1947 26 күн бұрын

Thanks Kevin. It was pretty special. Thanks for watching, Gary

@tonyturnswood 23 күн бұрын

so wonderful to get to meet the folks we all spend so many years communicating with online! Great turn to Gary! Appreciate you!

@ThePapa1947 23 күн бұрын

Thank you Tony. I have met a few others but this was pretty special as we never really thought it would happen. Thanks for watching, Gary

@mikeyoung8126 20 күн бұрын

Hello Gary the bow turned out absolutely beautiful teak is such a beautiful wood and so glad you were able to meet your friend that was an amazing surprise

@ThePapa1947 20 күн бұрын

Thank you very much Mike. It was a fun little bowl to do. Yes it was cool meeting up with Rav. Thanks for watching, Gary

@toddlajiness 27 күн бұрын

I always look forward to Fridays for a new turning video. I really enjoy your videos.

@ThePapa1947 27 күн бұрын

Thank you Todd I appreciate your comments and thanks for watching. Gary

@alinmayerthorpe7801 27 күн бұрын

Lovely bowl Gary, teak is such a beautiful wood! It is nice that you were able to visit with your online buddy Rav at the wood working show, meeting friends like that makes the world a whole lot smaller, thanks! Cheers Al

@ThePapa1947 27 күн бұрын

Thank you Al! I am not big on these shows but I was not going to pass up meeting him in person. Take care, Gary

@user-tx1jt7ub7i 27 күн бұрын

Beautiful little turning Gary thankyou for sharing

@ThePapa1947 27 күн бұрын

Thanks Ronnie. Happy you liked it. Gary

@UPwoodturner 27 күн бұрын

Thanks Gary for sharing. I look forward to your videos.

@ThePapa1947 26 күн бұрын

Thanks Dwight I appreciate you watching. Gary

@vincenthunter465 27 күн бұрын

How nice that you and your friend got to meet! Now it's you turn to go to Poland!!

@ThePapa1947 26 күн бұрын

Thank you Vincent it was pretty special.

@scottbeilsmith4261 23 күн бұрын

Very nice little bowl Gary 👍. Now that is a really special guest. I enjoy watching Rav’s videos. Thanks for sharing and take care.

@ThePapa1947 23 күн бұрын

Thank you Scott! Yes that was pretty special hanging around with Rav. Take care, Gary

@Secondlifeofwoodturning 27 күн бұрын

It was a short meeting but priceless. One of my dreams came true - to see with You, Gary 👍 For sure we have to reapeat it. All the best for You my Brother from another continent 💪🙏 Rav

@ThePapa1947 26 күн бұрын

Hey Rav I feel the same way. Plenty of comments saying that part of the video was the highlight and loved it. So from another continent take care my brother. Gary

@alangibb3100 25 күн бұрын

Gary that turned out a cracking wee Teak bowl with some very nice grain, well done.

@ThePapa1947 25 күн бұрын

Thanks Alan! I have some candle holders I turned many years ago from a teak plank that came off a ship that was being dismantled. Very pretty wood. Thanks for watching, Gary

@54lespaul3 27 күн бұрын

Very cool Gary. So very nice to see you touching bass with an old KZfaq friend! Thanks for the glue up trips with a small bowl blanket!! Cheers, Rick

@ThePapa1947 26 күн бұрын

Thanks Rick it was a great time. I think the tenon's are really handy for a thin board. Thanks for watching, Gary

@stephendonathan6782 26 күн бұрын

I would be great to meet you and Rav both. I really enjoy watching the videos. Take care and GOD BLESS 🙏🏻!

@ThePapa1947 26 күн бұрын

Thanks so much Stephen and God Bless you as well. Gary

@travisgreen3533 25 күн бұрын

I enjoyed the video Tem million years ago, I worked with a cabinet maker in Corpus Christi, Texas who worked for the same construction company I worked for. I got to help him work on some of the teak furniture he was making for the owner of the company. The owner had large planks of teak in a huge shed in the construction yard. I wish I had asked for some of it. Beautiful wood. Your bowl is really nice. That is neat that you got to meet with your friend.

@ThePapa1947 25 күн бұрын

Thank you Travis! It was not ten million years ago but many years ago I turned some candle holders(Sconce) from a piece of Teak that came from a ship. It was the rails they tied the ropes to. It had huge holes here and there for bolting it down. I made us a pair then turned our mothers single ones. It seems I have those back now. Might see if our kids my like something their grandmothers had that came from me. Thanks for watching, Gary

@travisgreen3533 25 күн бұрын

@@ThePapa1947 I hope the kids are interested in them. It will be some good memories.

@TheMessyStudio 24 күн бұрын

Another beautiful piece, Gary! And it's always nice to meet our online friends in person.

@ThePapa1947 24 күн бұрын

Thank you Billy. Especialy from so far away.

@PhilAndersonShadyAcresWoodshop 27 күн бұрын

Well, OK, nice job on the Teak bowl, Gary! I always forget about sealer and then Ack's after. Quick, easy and food safe. I gotta remember that! But, the star of this video was you and Rav sitting side by side! How cool is that! I'm sure it was a special feeling and time for both of you. I'm so glad you could finally meet in person. Take good care, my friend and keep'em coming! 😊 Phil

@ThePapa1947 27 күн бұрын

Thanks Phil. I picked that easy turning so I would be able to add the ending. Best for last. I asked Rav's wife to record it using my phone. They are both wonderful people. Next the glamor will be the wood 🤔 Take care buddy, Gary

@calmwoodcreations3709 27 күн бұрын

Gorgeous wood, and a very attractive shape! I did a double-take when I saw the very nice shape. Several years ago, I turned a silver maple catch-all bowl that's a nearly identical match for your bowl, right down to the four ring grooves on the base. A happy surprise! 😲 😁 😂

@ThePapa1947 27 күн бұрын

Thanks Dave. If you think it is a nice shape that's a fine compliment. I have seen some of the beauties you have done. Thanks for watching, Gary

@paulsandeen2754 27 күн бұрын

Nice looking bowl. Small is good. Great for change, keys, paperclips or whatever. I always know where my keys are because of a bowl.

@ThePapa1947 27 күн бұрын

Thanks Paul. I like the small ones as well. Good for snacks like cheese. Gary

@anitabier2114 27 күн бұрын

Cool video Gary, nice to see the bonus video as well. Cheers

@ThePapa1947 27 күн бұрын

Thanks 👍 Happy you enjoyed the video. And the ending, Gary

@DavidBird-uu8km 27 күн бұрын

Very nice, another great project.

@ThePapa1947 27 күн бұрын

Thanks so much David happy you enjoyed it. Gary

@albertdawson6814 27 күн бұрын

Cool like always Gary. Yes I highly believe in the hot glue. Yes denatured alcohol just removes that glue for sure. Pretty piece. Thank you for sharing. See you next week

@ThePapa1947 27 күн бұрын

Thanks Albert and I agree with everything you said. Take care, Gary

@MANJITSINGH-ko2oi 7 күн бұрын

HI gary simple but beautifull.

@ThePapa1947 7 күн бұрын

Thanks Manjit. Sometimes simple is all it takes. Gary

@michaelross8794 26 күн бұрын

Sir, as always, thank you so much for sharing. Every time I power up the lathe, I apply yet one more thing I learned from watching your videos. Your explanations are perfect. And, of course, you demonstrate/model such wonderful techniques. I pay very close attention to the tool angles and how the cutting edges contact the wood surface. And yes, your videos are ALWAYS greatly anticipated.

@ThePapa1947 26 күн бұрын

Thank you very much Michael for your very kind words. They are much appreciated. Happy turning, Gary

@johnd5805 27 күн бұрын

Awesome. Thanks for sharing the video of your friend. One day I will buy me a lathe. Nice bowl. Makes me want to eat a bowl of cereal now.

@ThePapa1947 26 күн бұрын

Thank you John. I chose a simple turning for this as meeting him in person was the highlight of the symposium. Both Rav and his wife were fun to hang out with. Thanks for watching, Gary

@AlienLeader4 27 күн бұрын

That is an awesome bowl. Very cool when you get to meet friends that you meet through the channel. I will check out his channel. Keep up the awesome work. 👽

@ThePapa1947 27 күн бұрын

Thank you very much. It was pretty cool for me. Especially since he lives so far away. Thanks for watching, Gary

@DougMilleratWoodSpunRound 27 күн бұрын

Very nice Gary. Love the simplicity.

@ThePapa1947 26 күн бұрын

Thank you!

@markduggan3451 27 күн бұрын

Great turning, weirdly, we were cleaning my shed out today, and my wife found a piece of teak, so I'm going to have a go at turning it soon. Nice to see you meeting up with your friend.

@ThePapa1947 27 күн бұрын

Thank you Mark. I was rearranging (cleaning up) and found another piece of teak. Years ago my nephew (an old man now lol) worked at a cabinet shop and gave me some wood from the scrap barrel. Had a good time hanging out with my friend. Thanks for watching, Gary

@STMwoodturning 27 күн бұрын

YOU GOT TO MEET RAV!! That’s so cool!!! So glad he was able to come to the USA. Sorry Gary but seeing you talking with Rav is the best part of the video even though the little teak bowl was a nice one.

@ThePapa1947 27 күн бұрын

Wait just a minute Stuart...Rav got to meet me 😊😊 Just kidding I was very excited to meet him. A down to earth carrying man . It was an honor. Sure happy it had. Gary

@STMwoodturning 26 күн бұрын

@@ThePapa1947 My bad LOL

@mashmade-airth 27 күн бұрын

À great wee video Gary, full of good tips, especially for myself & my experience level & a nice wee bowl at the end of it. Nice to see you meet up with your mate after a while. 👍🏴󠁧󠁢󠁳󠁣󠁴󠁿

@ThePapa1947 27 күн бұрын

Thank you Jim, happy to hear you liked the video. It was pretty cool meeting up with Rav. Long time in the making. Thanks for watching, Gary

@glencrandall7051 27 күн бұрын

I have trouble traveling across a couple of states to meet a KZfaq buddy but he traveled half way around the world. It's really great when that can happen. Thank you for sharing your meeting. Have a great day and stay safe.🙂🙂 PS The turning was pretty good too.

@ThePapa1947 26 күн бұрын

Thanks Glen It worked out well as he was going to meet his good friend in Seattle. And they had planned on the AAW and was hoping I would go. Well it was a very short drive for me (7 miles) only concern was if my ankle could handle all the walking. It worked out. Thanks for watching, Gary

@RadioFaceWoodWorks 27 күн бұрын

Also it's good to finally see your face...the man behind the miracles 😀😀😀

@ThePapa1947 27 күн бұрын

Thanks so much. I wanted to get Rav in it and figured I should be as well Thanks for your comments. Gary

@ClaytonsWoodArt 26 күн бұрын

As soon as you said Poland I was hoping it was going to be RAV!! Nice bowl, Gary, but nicer still is the meeting! Take care both of you!

@ThePapa1947 26 күн бұрын

Thank you Clayton. I think "Poland" gave it away. Glad I shared that moment. Take care, Gary

@grambear8 27 күн бұрын

Nice little bowl

@ThePapa1947 27 күн бұрын

Thank you grambear8 I appreciate you watching and commenting.. Gary

@garyp8471 27 күн бұрын

Great little bowl, and another how to video, hey Thank you for sharing your meet up with long time you tube friend from nother country. All the best from Lincolnshire UK

@ThePapa1947 27 күн бұрын

Thanks Gary. I enjoy making this video and I'm happy you liked it. For sure it was great meeting Rav in person. Gary

@copperowlwoodturning5929 27 күн бұрын

Beautiful bowl, Gary. 😊 nice to see the glue on tenon technique with DA removal too. How awesome it must have been to finally meet Rav. This makes me happy. 😊😊

@ThePapa1947 27 күн бұрын

Thank you Rob. I do like the hot glued tenons. As long as I have some ready it sure makes it easy. It was great meeting Rav and his wife. We had a great time. Thanks for watching, Gary

@BobbyGriffett 24 күн бұрын

Love it nice bowl

@ThePapa1947 23 күн бұрын

Thank you Bobby I appreciate you watching and commenting, Gary

@JordanWoodwerx 27 күн бұрын

That’s awesome you and Rav! You guys look like you’re having a great time! Nice bowl too! Thanks Gary!

@ThePapa1947 26 күн бұрын

Thanks Bruce! We sure did have a good time. Thanks for watching, Gary

@tompuskar4426 27 күн бұрын

Nice little project, Gary. Teak is a nice wood to turn and finish. Glad you could meet up with your turning buddy--great to see someone in person that you have been cyberfriends for a while.

@ThePapa1947 27 күн бұрын

Thank you Tom. I have another piece of rough saw teak. Might make some nice segments. It was nice meeting Rav And for all those who asked they got to see me. Thanks for watching, Gary

@tuffymartinez 27 күн бұрын

Thank You Gary.... This was a fun one ( Well Gary U were doing all the work & I'm just sitting here drinking coffee) Very nice show today on how to turn with out using the traditional holding techniques. I like this one and I am surprised at the holding power of hot glue and how quickly it can be removed.... Until Next Time Gary.... TM

@ThePapa1947 27 күн бұрын

Thank you tuffy. A lot of people do not trust hot glue. But it does work. Will I use it on a 20lb turning? Nope! But I trust it for what I do Thanks for watching, Gary

@jonmartineau1004 27 күн бұрын

How neat Gary ! Finally meeting your " brother " from Poland ! Those kind of meeting just don't happen that often . Oh , and you are looking good ! Now for the bowl . I love it . I love the little detail you put on the outside . And awesome chatoyance from where I sit . A beautiful bowl . Have a great weekend and thanks for sharing both video's .

@ThePapa1947 26 күн бұрын

Thanks Jon! Happy you liked the bowl but even more so the end of the video. Plus all those who wanted me in front of the camera...there ya go LOL! It was fun to do. Gary

@MarklTucson 27 күн бұрын

That is a very nice piece Gary. Had no idea teak had that kind of figure and grain patterns. The dish shape is also very good. So neat that you got to meet Rav (sp?) in person -- that is one of the neat things about this maker community - the connections we get to make electronically and then sometimes in person.

@ThePapa1947 26 күн бұрын

Thanks Mark. While straightening out one of my storage places for boards I found another piece of Teak. Who would have ever guessed we would have met in person. Thanks to Rav's friend in Seattle it happened. Take care, Gary

@RadioFaceWoodWorks 27 күн бұрын

Nice little project...nice to see Rav here...have been a fan of his for quite some time...stay safe...press on 😎Joe

@ThePapa1947 27 күн бұрын

Thank you Joe. It was nice meeting him and his wife. Take care, Gary

@mikeguschke 27 күн бұрын

Beautiful bowl, Gary, thanks for sharing your tendon process. I’ve used the hot glue technique on a segmented turning with great success.

@ThePapa1947 27 күн бұрын

Thanks Mike. I think once someone tries hot glue they see how well it works. Thanks for watching, Gary

@skipflorey2511 25 күн бұрын

Gary, great bowl! I’ve found teak to get good results. Like your design. I also visited Rav’s channel and enjoyed it.

@ThePapa1947 25 күн бұрын

Thank you Skip! Rav is a down to earth guy.

@janeoverby2151 27 күн бұрын

What a wonderful day, you got to meet your friend in person! And that's a beautiful bowl. The Chaytoyance is fantastic!

@ThePapa1947 27 күн бұрын

Thanks Jane. A very pretty wood for sure. It was great meeting him. Was in the works for a year. Thanks to his friend in Seattle it happened. Thanks for watching, Gary

@jarmstrong2843 26 күн бұрын

After a hectic week, I finally got to sit down an watch some wood turning videos. That is a nice teak wood bowl. It's a simple and quick design that is pleasing to the eye. Nice one, Gary!!

@ThePapa1947 26 күн бұрын

Had one of those myself getting the motor home ready for a family reunion trip. One reason I did the simple turning. The nice grain was a bonus!

@charlesallen4702 27 күн бұрын

I’ve been using the hot glue tenon trick ever since I saw you do it years ago. And thank you for the nice story at the end. Really enjoyed it. Thank you Gary

@ThePapa1947 27 күн бұрын

Thank you Charles. I know the idea of hot glue might worries people. But I have done good sized segmented turnings using hot glued tenons. Happy you liked the end! Gary

@dtork47 27 күн бұрын

That was fun Gary, thanks for sharing and glad you got to meet your buddy. Stay safe.

@ThePapa1947 26 күн бұрын

Thank you very much. Nice to do something easy. Thanks for watching, Gary

@qapla 27 күн бұрын

That is a truly nice bowl. Teak is a versatile wood with nice grain. If I could have given this video two likes I would have. Not only was the turning great - the surprise video at the end was priceless. Thanks for sharing that with us.

@ThePapa1947 27 күн бұрын

Thank you my friend. I turned a number of matching sconces(candle holders) from Teak that came off a ship that was being scrapped. Beautiful wood. They still frame our fireplace after 50 years. For me the ending was the whole show. Take care , Gary

@carolriley8472 27 күн бұрын

The bowl is really nice! I also met him in Portland...we were on the same elevator and I said, "Wait, I know who you are and I introduced myself." I have watched him for years and he gave me a key fob. He told me I was the only person who recognized him. This was after the banquet on Saturday night. I wish I could have met you, too.

@ThePapa1947 27 күн бұрын

Thanks Carol. I sure wish I had known you were there. Could have got all 3 of us together. I left right after the banquet. My ankle said no more walking. Maybe next time. Gary

@garthkeck2003 25 күн бұрын

Cute little bowl and aren't friendships wonderful

@ThePapa1947 25 күн бұрын

@@garthkeck2003 thanks and yes they sure are.

@OldMtnGeezer 27 күн бұрын

Neat little bowl, Gary, and great story of making the world just a little smaller. 👍

@ThePapa1947 27 күн бұрын

Thanks so much. I have viewers from all over but never really thought I would meet them in person. This idea was started a number of years ago. Thanks to Rav's friend in Seattle who made it happen. Gary

@WoodenItBeNice 26 күн бұрын

That is a lovely looking bowl Gary. Sorry but the little video at the end stole the show for me. So great for you to meet Rav. Take care my friend. Cheers, Huw

@ThePapa1947 25 күн бұрын

Thank you Huw. The only reason I made the video at the start was to show the video at the end. And to feed my turning addiction 😁😲🥴 Take care buddy! Hwyl, Gary

@kimseyjustkimsey5256 22 күн бұрын

Looks Awesome Gary! Fun project and I think I’m going to do your denatured alcohol in the squirt bottle seems to work very nicely 😎 That was Awesome also that ya got to meet Rav and was really cool seeing the both of you sitting together a moment too remember! 😎

@ThePapa1947 22 күн бұрын

Thanks Kimsey. It does work well. Meeting Rav was the highlight of the AAW and this video. Thanks for watching, Gary

@danielbuck 27 күн бұрын

I would have never thought to use hot glue, I will have to try this! Seems like it would be quite a bit cleaner to remove than wood glue. Thanks for the video :-)

@ThePapa1947 27 күн бұрын

Thanks Daniel. Just make sure the glue is hot. My gun will do 60 and 100 watts. Both work but I use 100 mostly. Gary

@danielbuck 27 күн бұрын

@@ThePapa1947 thanks Gary! I will make sure it's hot!

@Bramsshed1913 27 күн бұрын

Hi Gary and an excellent little project ,I use hot glue fairly often and my way of releasing it is using a hot air gun. Cheers and take care ,Bram

@ThePapa1947 27 күн бұрын

Great tip Bram. I will have to give that a try on the extra strength CA. Thanks for watching, Gary

@jayscott306 24 күн бұрын

Great dish, Gary! And how neat to meet someone in such a way. Met Gord last summer, but that was only 600kms to get there. :)

@ThePapa1947 24 күн бұрын

Thanks Jay. A few years ago we did a motorhome trip to Banff and did not realize we were close to where Gord lives My wife's sister and husband lived in Red Deer years ago. My wife and her mother took a trip up there. Thanks for watching, Gary

@jayscott306 24 күн бұрын

@@ThePapa1947 Yes, just a few hours drive. We'll be close to Jasper this summer. I prefer it to Banff. More quaint, less tourist-y. Both are gorgeous, though.

@gils_designs-4yahoo8.. 27 күн бұрын

Glad you had the chance to meet your YT buddy in person. I could easily see that both of you were happy. I've used the hot glued tenon myself on small turnings. I have reservations, however, on using it on larger bowls, especially on my lathe which the slowest speed is 700 RPM. What do you think any limit of size and or RPM limits for this technique?

@ThePapa1947 26 күн бұрын

Thanks Gil. I had this one spinning around 1200. Also have used it on decent sized segmented turnings. The bigger the turning the larger the tenon. Much more hot glue contact.

@williamellis8993 27 күн бұрын

Nice bowl, Gary. Even nicer that you got to meet your friend in person. When did you lose the beard? Bill

@ThePapa1947 26 күн бұрын

Thank you Bill. Yes we had a great time. Thanks for watching, Gary

@Zzrdemon6633 27 күн бұрын

If you get the bowl too hot during sanding or aggressively drilling out the center with a large dia forsner bit it will also loosen up the hot glue joint and the bowl will depart the chuck! Leaned that the hard way🤣

@ThePapa1947 26 күн бұрын

If it is getting hot uou might be pressing to hard or spinning too fast. Both of prevent a good sanding job.

@Zzrdemon6633 20 күн бұрын

@@ThePapa1947 Yes I have one of those generic wood lathes that the bottom speed is 600, I just keep a feel for the temp and it works out ok! I bought a dc motor to put on it but it's needs a lot of work to make it fit and time is scarce!

@bobbyshelton8781 27 күн бұрын

Stay safe and healthy.

@ThePapa1947 26 күн бұрын

Thanks Bobby!

@valeriehenschel1590 27 күн бұрын

Not every bowl needs to be large. Now I know why I never caught up with you in Portland!

@ThePapa1947 26 күн бұрын

Thanks Valerie. We saw you come into one of the demos and I text you. Was hoping to catch up but you were gone before we got out. I think I replied last night but we were at a family reunion out in the boonies. Bad connection! Gary

@valeriehenschel1590 25 күн бұрын

@@ThePapa1947 I saw the text, but not you. You are not the only person I did not catch up with, in spite of trying. So many good demos, there was not enough time to socialize except at night.

@ThePapa1947 25 күн бұрын

@@valeriehenschel1590we were about 10 rows back. Really crowded and may angle slowed me up a lot.

@WoodenItBeNice 27 күн бұрын

1st

@ThePapa1947 27 күн бұрын

Wow that was fast.

@williamritter7054 27 күн бұрын

Nice. Enjoy seeing your turnings.

@WoodenItBeNice 27 күн бұрын

@@ThePapa1947I do try you know

@RadioFaceWoodWorks 27 күн бұрын

@@WoodenItBeNiceI think Huw stays up all night with his hand on the button to be first🤣🤣