EBike Conversion Kit from Ebay - Build your own Electric Bike 48V 1000W

Рет қаралды 145,969

Күн бұрын

Watch my step by step video on how to build an electric bike using a conversion kit I bought on Ebay for $450.
Feel free to ask me any questions or leave a comment and tell me how your e-bike build went.
Watch my other video on painting an aluminuim frame to see how I prepared my 2003 Cannondale CAAD 3 BadBoy • How to Paint an Alumin...
Or skip to my other video on how I installed my motor cut off switch here • EBike Brake Hack - Mot...
Links to the items I bought on ebay here (but I cannot confirm they will remain active or at the same prices I bought them at. They are from independent sellers, not from me.)
I've only added these links to assist, if any stop working please let me know and I'll delete them.
Violamart 48V E-Bike kit www.ebay.com.au/itm/112310971157
48V 10AH Battery www.ebay.com.au/itm/184612091872
Brake cut off sensor switch www.ebay.com.au/itm/133621341234
Rear Torque arm www.ebay.com.au/itm/144002501225
Controller case www.ebay.com.au/itm/164800802227

Пікірлер: 178

@omnipresentvideo7686 29 күн бұрын

This man has built the exact bike im trying to build now: all black with tanwalls, and only want throttle use. My mind cant comprehend this; i just started researching ebike builds and this popped up.

@dolts1234 2 жыл бұрын

Hi I have attempted this today with no knowledge of bikes/ebikes and have given up already, this is the best video I have found so Mabey I'll give it another shot 🤦‍♂️🤣

@goonbreathfpv Жыл бұрын

So 5 months on, did you get it to work?

@angierobbins3308 Жыл бұрын

Did you get it?

@19skater9 Жыл бұрын

Hahahah

@Aw4ken3d Жыл бұрын

......

@Watermelonsone 10 ай бұрын

Did you get it?

@MrBenG3 2 жыл бұрын

Very smart placement of the cut off sensor

@zyadnouh2647 2 жыл бұрын

I have a kit coming and this is the best tutorial yet. Great job mate. Cheers.

@W4WEnglish 2 жыл бұрын

Nice job! You can use a pvc pipe to hide the excess wires coming out of the controller. Just cut it in half and "clamp" it on the frame with the wires inside it. That's how i had it on mine.

@Mikey2hands 2 жыл бұрын

Pro tip. Thanks I might try that.

@6ettinold 2 жыл бұрын

Did the same with my last build. The piece of 22mm poly pipe sat perfectly in a recess on top of my battery. I covered it with some carbon fibre effect wrap, so that it doesn't resemble a length of pipe.

@davidcrowson4745 2 жыл бұрын

The BEST tutorial I've seen on making an E-bike 👍

@pkf4124 2 жыл бұрын

Nice job, no fuss and straight forward. Thanks

@kspann6583 2 жыл бұрын

Made a couple of ebike kits, this is one of best, and most helpful. I've learnt a few things cheers 👍

@kevinz2000 Жыл бұрын

cutting the full length throttle is a brilliant idea! Using full length is dangerous. Just placing my hand on the handle with a slight grip triggers the power, I had the bike rushing out a couple of times before changed to a thump throttle.

@rippydippy_fpv7304 2 жыл бұрын

Bro! the brake magnet location is GENIUS

@badnomad357 2 жыл бұрын

I agree. Very clever mod

@charlesmaybank6323 Жыл бұрын

Mate that was the most educated e bike Bild video I have seen ..THANK YOU SO MUCH ,It has Wright helped me with when my kit arrives..china to uk 4 to 5 week's

@robertbrawley5048 Жыл бұрын

Thanks for showing me the chain tensioner. . I didn't know they made 'em. I use my 21 speed bike in a single lowest gear and with that belt tensioner I can eliminate the derailer

@lookylookielokob.5493 2 жыл бұрын

thos is the very first installation video that is fully detail on how to install a diy ebike kit, completeto the wires.. keep up the good videos.

@mrw1054 2 жыл бұрын

Great job Dude looks great and thanks for all the tips! Very informative video!

@thetruthz13 Жыл бұрын

Thinking about doing this conversation.... Found this video really helpful. Great tips and great build 👍

@rwcoley3057 2 жыл бұрын

Nice job, very clean!

@craigdoriety9798 Жыл бұрын

This is probably the route I will go on getting an e bike. I'm 6' - 5" and have an existing Trek mountain bike with XXL frame. Hard to find that size in factory e bikes unless you are willing to pay a premium price for a Trek. Specialized, etc.

@WoodoakWilderness 11 ай бұрын

Fab video, I went the other way and made all the wires longer, that way i could make a small hole in the bikes frame and had ALL the wires run inside the frame. Took some messing with a small nut on the end of the wire and a magnet to move it along the poles from the outside but all the wires have vanished, hidden inside away from sight and the rain.

@Kumari_44 10 ай бұрын

I was going to do this exact same thing for my first build last year. 👌🏽

@blackpearl209 Жыл бұрын

Enjoying my first ebike

@davesmith3884 2 жыл бұрын

There is a difference when using an aluminum frame bike and a steel frame bike. The aluminum frame will have wider material where the rear axle is installed at the hub drive than the metal frame. You could find your rear hub motor axle does not have enough threads left when you install torque arm after tightening down the axle nut on either side. The metal frame has thinner material in that area so if you install torque arm or drop out you have more material to work with on the axle shaft.

@stevearkie5722 Жыл бұрын

There’s one thing knowing about electricity not a good idea to ride your e -bike in rainy weather .

@republicfryslan 11 ай бұрын

Oke so get a metalframe. Thx bro

@bobikbobikowy5458 11 ай бұрын

@@stevearkie5722 well if i use it as a commuter bike it must take me to work even in heavy rain. There is no mercy xd

@Tolbens Жыл бұрын

Great job 👍 The best video of this kind. I was wondering if I use a dynamo on the front wheel (using it at downhills) and a panel(on sunny days) somewhere back would keep the battery charged for a long distance.

@googleuser2170 10 ай бұрын

That brake switch is sweet.

@mohammadsohel510 2 жыл бұрын

Thank u so much. I love my light weight v break bike. I will definitely do exact same thing what u did slowly. Those grips and extra wire gotta go.

@annscanlon8877 2 жыл бұрын

Great video. Nice looking bike!

@shaunhall6834 7 ай бұрын

Very helpful video! Im getting ready to build my first ebike.

@simontate1262 9 ай бұрын

thank you so much for this. by following your instructions i set mine up easily.

@gadgetcaches5485 2 жыл бұрын

Brilliant tutorial! Very clever wire management and kit modification. I'll be saving this video for future reference.

@dalefernandez129 Жыл бұрын

Really awesome video! I would love to try this as a fun project ..... With the 10ah battery ... How many km distance do you get out of it? I'm wondering if I should get a larger size Ah hour battery to possibly be able to ride around a 50km range on a single charge

@Samkoutloud 2 жыл бұрын

You certainly can and should use the gears on your bike, you'll get the most out of the motor, and it'll run more efficiently, gears help it along.. As in you'll make it uphill faster.. It's not always about "just give more throttle" .. You won't necessarily go any faster or farther giving it more throttle could easily burn the motor too..

@stevieboy4302 2 жыл бұрын

Nice and easy,not like some vids. Very good dude.

@benpar8120 10 ай бұрын

Excellent video. Does it have regenerative braking?

@dazzelya 2 жыл бұрын

Very clean. Nice.

@dereksecore63 Жыл бұрын

Very clean 👍

@ipodtouchtony6027 2 жыл бұрын

nice bike...just one question how many Km does the battery last with throttle? and assist?

@simo2161 2 жыл бұрын

Amazing video great job

@feature_creatures Жыл бұрын

Hey could you please telll me/go more into detail about how you connected the battery connector to the controller? what are those connectors called?

@diegudr 2 жыл бұрын

I made a torq arm out of a single piece of steel. It was a pain to cut the hole for the axel but I think it is more solid than those two piece ones. Anyway They are probably both good enough. I am just a cheapskate that makes things if I have the stuff laying around anyway.

@dgib1694 2 жыл бұрын

Great job

@trumangates3592 3 ай бұрын

The only advice I'd say is have the controller inside the frame to avoid damage from rocks and pebbles and also hides the electrics. It makes for a nicer aesthetic

@ianmangham4570 2 жыл бұрын

Good looking bike mate

@TheMegaTheseus Жыл бұрын

FIY This motor can handle about 3000w no problem. All you need is a 3000w controller and 72v battery capable of at least 40A continuous discharge. 72x40 = 2880w

@adamkostan8671 2 жыл бұрын

Nice work work 💪 ✅ +👍 💪 Keep more video's coming 📹

@icecave89 Жыл бұрын

Built myself a Dillenger StreetLegal kit in 2016. Just wrapped the cables when necessary. (Great Video) What app did you use ?.......I'm off to look for it 🙂 Found an app....although the StreetLegal display has all the info, always nice to play a bit........

@UltrafiAV 2 жыл бұрын

Brilliant! Love the tan side-wall look. And the cut-off switch idea is great. Question: Do you find the V-brakes adequate or would you recommend/prefer disc brakes?

@Mikey2hands 2 жыл бұрын

Thanks. Yes I find these V brakes are fine, but I know a lot of people prefer disc brakes with their e-bikes.

@McGoogger 3 ай бұрын

looks great

@djVania08 Жыл бұрын

Any updates on the ebike? Will this work with any bike? Or does it depend on the wheel size?

@BeepingMad 2 жыл бұрын

Thank you so much for posting this. The mountain bike I am thinking of converting has got quick release wheels. Is this conversion compatible with the quick release spindles?

@Mikey2hands 2 жыл бұрын

Yes good question. You will probably find the rear drop outs are too narrow for the thicker ebike axel. Simple fix to just file out the rear drop outs until it fits. Stay tuned I’m about to drop a new vid on converting an Electra Townie to an ebike where I’ll widen the rear drop outs.

@BeepingMad 2 жыл бұрын

@@Mikey2hands thank you for getting back to me. I will keep a eye out for your next video

@ianmangham4570 2 жыл бұрын

Nice break levers 🤣 real old school monsters, av a gud'n mate 👍

@stan464 Жыл бұрын

Built mine from a near identical kit. Just some things to consider. Weight of Bike. Weight of rider with the above in mind. My spokes had come lose causing 2 spoke nuts to disconnect (self-unscrew) and they now rattle inside tire. other spokes become lose causing the tire to be very very wobbly, i have resolve this sort of but the tire is now longer 100% straight.

@Kumari_44 10 ай бұрын

A 250 watt motor done this exact same thing to my spokes over the course of a year and a half. Cracked the frame at the holes in three points. The rims typically just arent built for that power. Letalone 1000watts. Go to the shop and get the wheel straightened. And buy a spare rim to reattach your motor to. just incase your current ones crack over time causing your current rim to fail completely.

@tbirdtim56 8 ай бұрын

Well done tutorial, just enough info. One question though, how far can you go with the 10 amp/hour battery?

@Mikey2hands 8 ай бұрын

About 20 good km on the 10ah battery. After that there’s a noticeable loss in power.

@hot_shot_arman6302 2 жыл бұрын

Hey mike wanted to know how long does a 36 volt 500watts 12ah or even higher ah last? Im looking to do it for delivery purpose

@Mikey2hands 2 жыл бұрын

You would need to ask someone with that set up. Too many variables.

@danfederer4544 Жыл бұрын

hey mate, loved the video and am getting more confident to build my own ebike. Just worried about compatible parts, abit confusing because I constantly see 48v, 10ah and 40A all the time and don't want to buy the parts without knowing for certain they will work. I am based in Aus and am after a 48v/52v 750-1000w ebike, a bit of help would be amazing... cheers!

@Mikey2hands Жыл бұрын

You just need to buy a battery that matches your ebike kit. Ie 48v 10Ah 1000w. The more Ah = longer distance between charging. If you look on eBay most battery ads will show the watts that battery suits.

@FATTY1990 2 жыл бұрын

i am in the process of building one of these Great Video i actually have the same issue with gears and break levers all in one but can't find that sensor you have that fits directly i am also in australia

@Mikey2hands 2 жыл бұрын

Search eBay for sensor cut off switch. I don’t recommend using the gear cassette that came with the kit. You never use gears again once the kit is installed. I just put a single speed 12 tooth cog on the back with a chain tensioner and removed all the gears and cables. Good luck with your project.

@Tantium 2 жыл бұрын

@@Mikey2hands am i right in thinking that if you decide the top speed is too low, you could swap your 'fixed gear' to a lower gear for higher top end? would lose some torque i suppose but there would be flexibility on top speed?

@Mikey2hands 2 жыл бұрын

@@Tantium yep better top end speed. The motor soaks up the extra torque as you start to pedal. Then as you go faster you can still get traction with the low gearing combined with the motor power. I’ll make a better video explaining this when I build my wife an Electra Townie ebike.

@DaRush-The_Soviet_Gamer Жыл бұрын

I don't understand the problem with full length throttles. All motorbikes have them. Easier to trigger the motor with it. What's the issue?

@lesterroberts1628 2 жыл бұрын

if i use only pedal assist and no throttle, would i be able to not use the brake cut off sensors? since i don't pedal and brake at the same time

@Mikey2hands 2 жыл бұрын

Correct. Brake cut off is only required for throttle.

@sharksfarming836 Жыл бұрын

nice vid man

@wokbok43 2 жыл бұрын

Hi there so only your back break is connected to the controller box ? Is that right ?

@Mikey2hands 2 жыл бұрын

Yep cut off switch is only on back brake. But as you always pull both brakes together that’s all you need.

@stevearkie5722 Жыл бұрын

Excellent more simple compare to others the gas power is to loud ,electric small bikes are in .

@stevehisey389 2 жыл бұрын

Nice, what brand of kickstand are you using and has it survived? Thanks

@Mikey2hands 2 жыл бұрын

Just a generic eBay brand. Still going strong.

@stevehisey389 2 жыл бұрын

@@Mikey2hands thanks

@callmeJollo Жыл бұрын

I am trying to buy a kit for my bmx but the fork opening on my bike is small can i just remove the cassette from the motor and take the gear from my bmx and put it on so that it will fit in my fork ?

@Mikey2hands Жыл бұрын

Only if it is a 26” bmx. It will be easier to buy a new cog on eBay than use the old one off your bike.

@Cheese-Head Жыл бұрын

If you ever get a flat on the rear wheel, how does it get fixed without ha wing to undo all those wires you melted on together?

@Mikey2hands Жыл бұрын

It still has the plugs. The cables aren’t hard wired together.

@Kumari_44 10 ай бұрын

Whats the top speed on a flat?

@onecrazywheel 2 жыл бұрын

How many miles or KM can you expect to get out of this setup with just throttle? With a setup like this could you have installed a little screen or computer or does the battery have an indicator on it? Awesome video. Jeff - Central Florida

@Mikey2hands 2 жыл бұрын

The whole point of my build was to have as few wires and cables as possible. I don’t ride far and charge it up after every ride to keep charged up for the next ride. Can get 10-15kms out of this 10ah battery before it starts getting sluggish.

@onecrazywheel 2 жыл бұрын

@@Mikey2hands Great. Thanks for the response. I too may enjoy just getting a kit which is plain and simple for sure. Great video. I really liked the way you put this setup together. Jeff - Sunny Central Florida

@michaelsMW2movies 2 жыл бұрын

Hello. I am a complete novice when it comes to bikes, but do I need a motor that comes with the same number of gears as my bike currently has? I own a Trek Marlin 5 with an 8gear freehub( I think, might be a freewheel? ) cassette. Most of these kits come with a 7 speed sprocket, would I have to make adjustments to my drivetrain to accommodate losing the 8th gear? For example a shorter chain, or adjusting the shifter etc? Any help would be greatly appreciated :)

@Mikey2hands 2 жыл бұрын

Yes if you want to retain your gears it would be easier to do it on a 7 speed bike. However you may be able to keep the same derailure and replace the gear shifter to a 7 speed. Personally I like to remove all gears and put a single speed cog on the ebike wheel as you will find you don’t use the gears once it is motorised. I’m about to upload a new vid for my wife’s bike that will explain this.

@michaelsMW2movies 2 жыл бұрын

@@Mikey2hands thanks, I look forward to your video!

@VideoNash Ай бұрын

thanks

@marks6309 2 жыл бұрын

Hey, nice build! How long on average does the 48v 10ah battery last? Thanks

@Mikey2hands 2 жыл бұрын

Hey. Starts dropping off power between 10-15km but I usually recharge it every 10km to keep it at full power.

@QUIKCaspa 4 күн бұрын

@@Mikey2hands shouldn't feel power drop on a 48v battery, only really feel it on 60v - 72v batteries

@Budmulla 2 жыл бұрын

Hi man, very cool video! How’s the bike been to ride …is it still going strong?

@Mikey2hands 2 жыл бұрын

Yeah it still goes great. I changed the rear cassette for a single speed 12 tooth cog as you don’t need gears on an electric bike. It flies!

@Budmulla 2 жыл бұрын

@@Mikey2hands yeah nice, would be less noise with just the one cog on the back too I’d guess. I was thinking I would need 1500w but looking at your speedo I figured that’s fast enough! I really liked the way you went about the build with things like the throttle grip mod ect. If you’ve never used rescue tape or self sealing silicone tape give some a try …that would be awesome on the wire wrap.

@Tantium 2 жыл бұрын

@@Mikey2hands can you explain me like im dumb lol, when you replace the cassette for a single gear, what do you do with all the extra room on the axle? just some sort of spacer?

@troytoth8294 Жыл бұрын

Hello was your old rear wheel a 700c x23 size

@Mikey2hands Жыл бұрын

This Cannondale is actually a 26” model.

@byjaime152 2 жыл бұрын

nice bike

@Mikey2hands 2 жыл бұрын

Thanks mate.

@Americasno1917 2 жыл бұрын

Hi there are the rear wheels on these kits strong as I’m a big fella cheers great video

@Mikey2hands 2 жыл бұрын

Yeah super strong. The spokes are a lot thicker than usual wheels to allow for the torque of the motor.

@Americasno1917 2 жыл бұрын

@@Mikey2hands thank you

@ShonTolliverMusic Жыл бұрын

Does anyone know if a rear hub can be used on the front (by leaving off the cassette)?

@e.huss1 Жыл бұрын

no , a rear hub is a rear hub for a reason. if you want to use it at the front you need a front wheel hub. hope this helps

@db7059 2 жыл бұрын

What does road legal wires connect to and what wattage it reduces the motor to? Was this kit bought in Australia?

@Mikey2hands 2 жыл бұрын

Road legal wires connect to each other. When connected it reduces to 250W. Leave unconnected for 1000W. And yes bought on eBay Aus.

@db7059 2 жыл бұрын

@@Mikey2hands thanks for info. I googled if it was legal in Queensland. Whilst it is allowed but Police likes it to be pedal assist and some sort of code on it that it came from a manufacturer in Australia.

@KralArtus 2 жыл бұрын

The black paint on alluminium controller looks good. But works worse. Alluminium works as cooler, and black paint attracts heat - so the color is contraproductive. And one more thing - the rear wheel pours water directly on it, so you need some "rain shield" on wheels (however water could add some coolink on controllers surface, it makes eletcric contacts wet)...

@russelledwards8703 Жыл бұрын

How do the old brakes hold up now that the bike is electric?

@Mikey2hands Жыл бұрын

I’m a fan of the V brakes, they still work well with the e bike wheel. Disc brakes are probably the best option, followed by V brakes.

@DirtDigglerDetecting 2 жыл бұрын

I want to do this. :)

@hot_shot_arman6302 2 жыл бұрын

Ive got rear v brake is that ok for electric conversion.

@Mikey2hands 2 жыл бұрын

Yes it’s fine. I use V brake.

@hot_shot_arman6302 2 жыл бұрын

Mike can i have ur Instagram or fb im actually having trouble with the battery

@hot_shot_arman6302 2 жыл бұрын

Also does that mean i dont need the brake disc for my rear wheel as its v brake?

@AD-xn7pt Жыл бұрын

do you need the cassete on the rear wheel?

@Mikey2hands Жыл бұрын

No you don’t need the cassette, I removed it and put a single speed 12 tooth on instead. When you have an electric motor you don’t need the other gears. Keep it light and remove gears and derailleur too.

@scipanovgenadij7732 Жыл бұрын

HI.How did you adjust the chainline? With a single speed rear cassette? Can you give a video or a photo.

@db7059 2 жыл бұрын

You took it for long distance run?

@Mikey2hands 2 жыл бұрын

I mostly do shorter runs to and from work. About 7km each way then charge battery up fresh for the next day. Still going brilliantly, and fast.

@MOVtelevision Жыл бұрын

Is this battery prone to catching on fire?

@Mikey2hands Жыл бұрын

Not so far! 😎

@ianmangham4570 2 жыл бұрын

Did you know if you connect the pedal assist and you don't have a cut off or wire up the cut off levers you can just blip the throttle to shut off the motor so you can brake easy 😅 it over rides the assist

@Mikey2hands 2 жыл бұрын

I’ve tried pedal assist on a couple of different ebikes and just don’t like the way it feels. Much rather having the control of a throttle. 👍

@ianmangham4570 2 жыл бұрын

@@Mikey2hands i like both although every pedal assist I've had has broken after only a few weeks

@ssteam-lw5pi 2 жыл бұрын

How long did it last you?

@Mikey2hands 2 жыл бұрын

Still going strong. Same battery too. I’m building one for the wife now, vid coming out soon.

@ArticReaper Жыл бұрын

Hey just letting you know. The Battery you have linked they want nearly $3000 for it now. And the Break, Rear Arm and controller case links no longer work. c:

@Mikey2hands Жыл бұрын

Thanks. As they were eBay links for other retailers I expected they would end eventually. I recently bought a battery on eBay for $300 so you can still get deals if you shop around. Stay tuned for a new eBay ebike video dropping soon.

@ArticReaper Жыл бұрын

@@Mikey2hands Def will be keeping an eye open for one. Look forward to watching the next one. This video has got me planning out my first one. So thank you :D Its nice to see a fellow Aussie doing the videos cause then its a better look at the price.

@brianvandy4002 2 жыл бұрын

By the time you buy the battery separately, you're over $500 these days. At that price, I'd almost just spend a little more for a Lectric Lite. The onlything that has me considering what you did here is it's a little more stealth than a Lectric, so maybe less likely to get stolen.

@Kumari_44 10 ай бұрын

Nah. Building your own is far better for obvious reasons.

@beezysbeatz4924 9 ай бұрын

I have a 2020 Ecotric Rocket with 36v 500 watt geared rear hub. That was cool until I got a Catahoula Leopard dog pup and a 😊

@charlesmaybank6323 Жыл бұрын

I have saved this video..mate make a d.v.d ..sell it ..its that good 👍

@dannydyer2879 Жыл бұрын

Hows u get ur throttle work without a sensor

@Mikey2hands Жыл бұрын

Throttle doesn’t need a sensor. You are thinking of pedal assist which is different.

@dannydyer2879 Жыл бұрын

@@Mikey2hands thats what i mean hows it work without the pedal assist sensor, because I unplugged mine thinking it would be like rev and go but nothing happened

@Mikey2hands Жыл бұрын

It will work fine with just throttle and no pedal assist connected. Maybe check brake cut off cables, they may be preventing throttle from engaging.

@dannydyer2879 Жыл бұрын

@@Mikey2hands sorted it mate had go into the tune settings on display

@aayantheangler7101 2 жыл бұрын

my bike is 29 will it be alright?

@Mikey2hands 2 жыл бұрын

If you get a 29” wheel kit it will be fine.

@aayantheangler7101 2 жыл бұрын

@@Mikey2hands But the thing is that one is from us and I'm in aus plus that one was cheaper so I don't know any other cheap ones.

@Mikey2hands 2 жыл бұрын

@@aayantheangler7101 don’t pay over $300 in Aus. They are out of stock at the moment on eBay but I recommend waiting until new stock arrives. There are some rip offs charging $600 or more that aren’t worth it.

@ianmangham4570 2 жыл бұрын

@@Mikey2hands These are £200 here without the battery £380 with a battery 🇬🇧

@verofpv6152 2 жыл бұрын

I saved your link for the conversion kit but there still out of stock and they have not replied to emails, i cant believe u got it for that price $219 or something thats like half the price as every other seller on ebay.. i cant wait much longer will probs pay the $400 for the 1500w kit from aus dealer

@ronaldharris6569 2 жыл бұрын

I could do this kind of conversion

@bonon0_ 10 ай бұрын

whats the top speed

@Mikey2hands 10 ай бұрын

Watch til the end I do a test ride and speed test.

@mdweed1 Жыл бұрын

😀

@wobb_ Жыл бұрын

Is this kit good?

@Mikey2hands Жыл бұрын

Yeah it’s the best one I’ve found.

@wobb_ Жыл бұрын

@@Mikey2hands nice.

@YkitzWorm Жыл бұрын

Great video but I feel like you took alot of shortcuts and I'm kinda confused

@mayabetravelvlogs Ай бұрын

Can you help putting mine together? I'll pay you if you help me set it all up. I have the bicycle and the conversion kit.

@0s0sXD 2 жыл бұрын

I have a Dutch bike I doubt I can fit any of this on it. No way

@CezannieMelchor 2 жыл бұрын

I think you were getting false reading on your speed meter

@Mikey2hands 2 жыл бұрын

Yeah I’m not sure how accurate those speedo apps are. I think they judge speed by GPS signal so may be a bit off. Do you think I was going faster or slower?

@anotheraggieburneraccount Жыл бұрын

Probably don't use that exact battery. Doesnt list the battery chemistry or cell manufacturer. Look for a 48V battery with Samsung, Panasonic, or LG cells, ideally with LiFePO4 chemistry, though those can be a bit expensive.

@ianmangham4570 2 жыл бұрын

She's no Slouch

@chrisneeds6125 2 жыл бұрын

Everything is a work around? Must be a cheaper way of doing this, instead of throwing away all these parts.

@Aussiem8e Жыл бұрын

Anderson plug? 😆 that's a xt90 plug.

@Jake-bt3fc 2 жыл бұрын

Dang, I came here to see how to get my derailleur back on but it looks like you just decided to delete yours entirely. That might work for an aussie living in the flattest continent on the planet, but most people do need gears, lol. If full twist throttles were that dangerous then you probably wouldn't find them on every single motorcycle, either.