For Galaxy Watch 6 and Watch 6 Classic try out this method. kzfaq.info/get/bejne/mJihbLydq62thnk.html

Thank you so much for the detailed instruction. I am a 73 years-old female and have only a basic knowledge of computer. By following your instructions and it worked! 😊

Thank you so much, you saved me from sending back the watch, the main reason I bought it was for the blood pressure/ecg app and pretty mad at samsung for advertising that it was included without being clear that they would not support it in the US. Dante and you did an amazing service for so many of us. I read his instructions but will admit that it intimidated me until I watched your video several times. Don't think I could have managed it without the Bugjaeger site either. So, I want to thank all of you. The app does work on my watch 5 pro now and I am grateful. While I do have a medically approved cuff blood pressure reader and am able to use it to calibrate my watch, it's just not convenient to take it with me everywhere. When I have chest pains and the ecg app indicates a problem, I like to check my blood pressure before deciding if I should bother the people in the emergency room.

Oh, my gosh, after two hours of struggling with this, I finally got it after reading many of your comments. THANK YOU! I am 65 but "fairly" techy, but I've never gone into a device this deeply. I think the biggest issue was opening the correct Samsung Health Monitor. The icons are slightly different. Once I saw the difference, I uninstalled the old one, restarted my phone, and then reinstalled it during the process in the video. Do not install it directly from the Play Store. Good luck, and don't give up!

Thank you so much. Bought the Watch 5 for the BP monitoring specifically and couldn't find it until I followed your tutorial.

Straight to the point! This was great. Thank you

Super helpful and detailed enough to install myself. We'll done. You have a new follower. Cheers for the information and detailed step by step guide!

Working like a champ on US Watch 5 Pro version. I now have separate modified Samsung health apps on watch and on phone...Original apps are untouched...This is perfect, Thank you so much.

I spent a lot of time before discovering that the blood pressure app is not available in the USA. I was able to use my Galaxy Watch 5 PRO to check my blood pressure using this EXCELLENT video!

Amazing video thank you so much. I especially appreciate the tip to turn off the developer settings to save battery when done. A+

Really appreciate this! Almost loosing hope because BPM and ECG are not available on my location as well.. Thanks for this!

I followed your instructions, and it was done, without any problems. my watch is Galaxy Watch 5 Pro, the phone is S22 ultra. just one little advice, please compose a manual with pics based on this video, that makes followers much easier to understand rather than repeatedly rewind your video

Thumbs Up! Process worked perfectly on a Watch 5 and Samsung Galaxy Note 20 Ultra.

Extremely helpful video. Quick and easy. Thank you for this.

Best introduction I found. It worked easily and right away with Samsung watch5. Thank you

Thanks a lot dude!!! You made my day! I have purchased galaxy watch 5 but having pixel mobile!! I followed the steps you told and it is working like charm!! Thanks a lot. I am subscribing also for future this kind of videos 🙏

Yessir is working perfect! Thank you!

Thank you so much for the explanation. I have followed your suggestions and installed SHM in my watch. I'm able to calculate BP and ECG.

A while ago I was diagnosed with atrial fibrillation and hospitalized. Bought this galaxy watch 4 to monitor it but I was disappointed when I realised that function is not available in my country. Thanks to you, now it's enabled and I can be peaceful.

Thank you for this video! You made me very happy. Somehow downloading the files to my Pixel 7 did not work, but from my laptop to drive did, and the rest was a piece of cake due to your clear video (although I was a bit nervous as I have never done things like this before, and my BP did go up a bit I noted :). Now my SW4 is also measuring the BP and ECG. Thanks to you and of course Dante63!!!

Man. I honestly can not thank you enough for this video.

Just tried it and it really works, it was very well explained and app was installed without any issues, thanks a million,

Brilliant. Thank you 😊 Needed to switch Wifi from 5G to 2.4G for phone to watch connection , then worked perfectly. C'mon Samsung make this work across all Android devices.Thanks again .

Lifesaver! Thank you. I bought the doggone watch to have a quick bp checker and other uses obviously and doggone it if samsung didn't remove the freaking ability! Thank you!

I was able to successfully install and use BP on both a Galaxy Watch 5 Pro and Watch 4. Both are working great, thanks to this video.

Thank you so much, I can't express how greatfull I am the you explained it so well. Very helpful for someone who is computer illiterate like myself. It worked perfectly for me first try......

This worked great for my Galaxy Watch 5 Pro and a Oneplus 7 Pro phone. Many thanks.

Thanks for this tutorial! Worked great on my phone and Galaxy Watch 5 Pro. Plus, I learned about a new tool.

Thanks for posting this fix. One thing that got me hung up is that you have to load two pieces of software one on your watch 5 and the updated Samsung Health app on your phone. It was shown in the video but did not catch it in the verbal description.

Thanks a lot for explaining it in a so easy to understand manner. It worked amazingly.

5 star video . Well described and works a treat thank you

Amazing! Thank you, I was about to give up on those features since I don't have a Samsung watch.

It works on my samsung, i cant believe. Good job my friend :)

Very helpful. This wiill surely help in maximizing my watch's special features. Thank you very much. +1 subs here from the Philippines.

Thanks for an easy to follow and short video :)

Thank you sir , worked liked a charm . I was about to sent the watch back but you saved my watch

Bravo, so thankful, for it really started working on my watch, appreciate it.

Wow it works for a non-Samsung phone on GW5 44mm. Awesome thanks.

Thanks for the video bro, it helped and both are working fine

Works like a charm! thanks, buddy.

Worked great for me on 5 Pro. Thanks!!

Worked perfectly. Thank you.

Works like magic😂😂😂 It was a bit tough for me having to input my IP manually on the Jag-bla bla app, but it I got it. 😂😂Thanks

I am SO BAD with tech stuff but I got it too work!!! I had a little trouble because they updated it to "wireless debugging" so I panicked haha but if you hit this problem don't worry! The IP address is still present! Everything you need IS THERE....just follow the steps in the video and type in the code your watch will give you!! If I can figure it out so can anyone else haha this vidoe helped a lot thx!

Thanks dude. It's working 🙂

You're great, thanks to you I can use watch 5 blood pressure and ECG. Thank you. Harikasın, sayende watch 5 tansiyon ve ekg kullanabiliyorum. teşekkür ederim.

Thank you very much for your time to show us this.

Thank you! Worked for me!

Funcionó a la perfección, S22 ultra. Excelente tutorial. 👌

It is working very well . Thank you. Hi people, heed the warnings and still check with your doctors as required

Thank you so much. it took just 5 min to download and setup. cheers :)

Thankyou - it worked! Samsung galaxy 5 watch allowed ECG and blood pressure on an Oppo A52 phone

Worked great. Thanks!

Wonderful! Thank you very much!😊

Thank you! I got it to work on US 44mm BT

nice! Thanks Capt! :) Now im using ECG and Bloood pressure. mann the watch is just few points away from being 100% accurate. Not bad!

Thank you for this information- packed video. Please, do I need to use another external wifi or I can use my phone as the wifi source for the watch?

Thanks, this worked well on my Galaxy watch 5 and Samsung A73 5g (IN)

It worked on my watch 5 and huawei p30 pro. Many thanks

Thanks. Worked in Trinidad and Tobago.

Wow Man u made my day... brilliant

Thanks for the viceo, worked fine.. but, after installing, on both phone and on the watch we now have two samsung health apps, is that correct? Only the 2nd one works to do the bp right? Should the original be used for everything previous?

Thanks for the video! I was about to return my watch since I'm using with a Pixel 6 Pro and felt I wasn't getting the most out of the watch without those features. Wife has Galaxy S22 Ultra paired with her GW5 and had those features so I knew it was due to being a non Samsung phone. Now I can get the most out of the watch so I will keep it!

I have a problem. In the Bigjeager program, it doesn't establish conection with my watch, pop up a message "No address assosiated with host name". The IP is the same that shows up in the debug wifi section.

Thank you. Works great with Xiaomi smartphone!

Thanks for this tutorial. I tried it on my Poco F3 and it works great.

Got it to work in less than 5 minutes! Should we delete the watch APK file on the phone? Or keep it in case of updates? I've never side loaded before so unsure what to keep

Muchas gracias!!!, funciono sin problema, saludos desde México.

Thk you guy!!! My GW5 is now complete

I used ADB debugging through laptop. Thank you. It is working well.

Thank you man it really works in BAHRAIN

Thank you so much for sharing this, very helpful. I was facing issues before, but this was super easy to follow , appreciate it

Great video!!!!! Thank you

Thank you.. 💪 works great for me here in 🇵🇭 Philippines.. 😀

you are goated bro. thanks for sharing this

I hated that my Surface Duo 2 wouldn't let me use my watch 5 Pro to is full potential... Thank you so much!!!!

Works great! Thanks!

Wow, God bless u U helped me Thank u so much

Thanks, just installed on Galaxy 5 watch and OnePlus N20

Thank you guv. Just got it fired it up on my Xiaomi Mi 10 5G

Works great mate. Two questions. Do these affect overall battery consumption? and what's the difference between heart rate and blood pressure monitors? They seem to do the same thing

very nice and clear guide to enable blood pressure on my Galaxy watch 5, thanks!

Bro, you're the best Screw the FDA for stalling approval on a freaking BP and ECG feature. But they have trouble approving other things! Maybe Samsung should ask for an emergency authorization And it'll be approved straightaway.

thank you so much for this tutorial video. =)

Thanks for the video ... I was able to install the app onto my watch 5Pro.. I live in Ontario Canada. When I bought my Watch 5Pro it came with Sasmsung Health installed . But it only had the ECG and No Blood Pressure... My watch 4 classic had both and worked great. So I installed both apps for the watch and for the phone .. so now both phone and watch have 2 apps each.. seems to be the app on the phones the stock installed icon looks normal and the one I installed has the wear W emblem on it. Inhale the 2 icons on my watch . The stock one has No BP and the one ininstslled has both ECG & PB. So when I use your app on the watch it tells me to open phone app.. I click the one with the Wear icon and it works .. when it tries to calibrate it says phones Disconnected but it's still connected . I tried uninstalling rebooting then reinstalling again and u getnthe same thing .. dosent recognize a compatible watch or says it's disconnected...

Wow...Thanks bro

"Allow debugging" did not show on my watch until after 2 attempts to connect. After that it went smooth. Thanks!

Thanks it worked

Worked out on my watch pro, but you have to first download the watch shm then the phone apk, and it worked

Worked perfectly for me

Nice! I got my to work on a non Samsung phone . And features are turned on .

NICE buddy thanks

Workes perfectly, Just one question. I can't see the button where i can enable the Irregular Heart beat in the settings. Any idea how to fix tthat?

Thanks Brother This works

Well done. Thank you

thanks !!! its works

Thank you it works 🎉

I had the same problem with an UK version watch, after following the initial steps, the Bugjeager couldn't find the watch, so I tried this: same settings as in the video but also Wireless debugging, there in the watch you could see Pair Device, a number XX.X.XX.XX:XXXXX, and a pairing code of 6 numbers, so after many times trying, in the Bugjeager, as ip address I typed just the first numbers before the two dots, thats XX.X.XX.XX and the 5 numbers after the two dots is the port so type them below, and below that is the pairing code from the watch, and then instead of connect, hit PAIR, and thats it, then continue as per the video. Worked for me ;-)

Thanks, worked fine in my Galaxy Watch 5.This doesn't work on the Galaxy Watch 6 though right...?

Hi, many thanks for your guide. I have a Galaxy watch 5 and only bought it to monitor my BP. Unfortunately, it is showing readings which are 10/12 points less than the digital monitor used by the doctors. Furthermore, sometimes it shows reading exactly the same as previously taken reading. I need your advice on how to get it to work properly. All the steps you say in your video, would they produce more accurate readings? Please help out. Many thanks my friend.