Echo Hedge Clipper Carburetor Cleaning and Rebuild

Рет қаралды 16,108

4 жыл бұрын

In this video I show you how to clean a carburetor on a Echo hedge clipper. The carburetor is similar if not the same to lots of other brands like Poulan, Ryobi, Husqvarna, Troy Built, Craftsman. The technique I used cleaning the carburetor is the same if you have a Zama or Walbro type. This is the same way you would clean weedeaters, chainsaws, and mini tillers. They just attach differently. One additional note......if you have adjustment screws H L or just one screw on your carburetor once you have removed and cleaned it the typical setting is 1 1/4 turns out after bottoming out the adjustment screws. Just FYI..

Пікірлер: 25

@dgomes265 Жыл бұрын

I run the expensive engendered fuel 2 stroke mix from Home Depot and both of my echo units have been running well for years.

@Jugeye1 3 жыл бұрын

This video is underrated - excellent and comprehensive with the years of knowledge showing through - thanks very much 👍👍👍

@JasonJonieBuilds 3 жыл бұрын

Thank you sir. I have been focusing on our Bronco lately but will throw in odd repairs along the way as they pop up. If you ever have a request let me know maybe I have something in the works that might be beneficial.

@heathwilson2572 Жыл бұрын

Jason & Jonie Build’s I use 91 octane premium unleaded ethanol free gas for all my lawn equipment has no ethanol in gas I got that gas at Stewart’s gas station. Never had issues with it

@jonathanwever8188 4 жыл бұрын

Awesome video Jason! Perfect timing as I've just been working on a fairly old chainsaw. You did a great job showing and explaining every detail especially compared to a lot of other videos that cut things too short and don't offer tidbits of useful insight. If you ever make more of these kinds of general tool repair videos it'd be great if you kept up the same attention to detail!

@JasonJonieBuilds 4 жыл бұрын

Thanks Jonathan, Jonie is trying to build the channel and won't let me do anything without the camera LOL. I appreciate you watching. If you have any topic suggestions let me know.

@emmanueldavis2010 Жыл бұрын

Thanks

@davidray4655 2 жыл бұрын

Been looking all day for this much information. BRAVO

@JasonJonieBuilds 2 жыл бұрын

Thanks for watching! We will have a few more small engine videos soon.

@gvxrlole 3 жыл бұрын

It's amazing how much valuable info I gleaned within the 30 minutes of this video. Thank you! Also a plus was how well thought out everything was presented, which helped glide things along at a smooth pace without the usual amount of afterthoughts added that should have been mentioned earlier. The good picture and audio quality didn't hurt either! First time I've seen one of your videos, and I've already begun checking out some of your others.

@JasonJonieBuilds 3 жыл бұрын

Thank you! We are still relatively new. We try to get better each video. Please subscribe if you haven't and let us know if you have any content ideas. Thanks again.

@user-wk8gg2uj8b 9 ай бұрын

It does have an adjustment screw it’s right under that brass ring by prime bulb. Remove the black cap in side and then you can adjust

@a-tecumseh9relic392 3 жыл бұрын

thank you ! i just picked up one of theese for free, dont look used much but the carb is plugged up for sure, i appreciate the way you did your video ! and your an honest man too. great idea getting that plug out, im gonna watch more of your channel now, i enjoy playing with small engines too, theres always something new to learn. have a great day!

@JasonJonieBuilds 3 жыл бұрын

Thank you for the kind comments. I enjoy small engines and worked on them for many years. Our channel has been mainly Bronco stuff lately but we try to fit in repairs as they come up. Thanks for watching.

@andrewbratos6907 2 жыл бұрын

great video and great job, I have 3 of them 2for working 1for parts, I never opened up one like that, thanks for doing the hard part for me

@JasonJonieBuilds 2 жыл бұрын

Thanks for watching

@KTHKUHNKK 11 ай бұрын

Nice job buddy no kidding

@JasonJonieBuilds 11 ай бұрын

Thanks for watching!

@jamesbabcock1332 3 жыл бұрын

One issue that I thought I saw happen is the throttle barrel sticks a bit as it rotates from idle to full open. I had the same problem. There is a small (2mm) roller that goes over a post at the periphery of the barrel housing. It just slides on and off and is easy to lose. A new one comes with the rebuild kit. Without it the throttle will stick and bind.

@JasonJonieBuilds 3 жыл бұрын

Thanks James