echo srm-225 pe-225 throttle repair. trigger replacement.

No video

echo srm-225 pe-225 throttle repair. trigger replacement.

Рет қаралды 22,230

small engine guys

Күн бұрын

Пікірлер: 31

@bigfunky74 6 ай бұрын

Cool thanks. My lawn guy gave me a pe2620, that he warned me had a bearing going, when I finally purchased a good mower. Bearing finally went a year later and I found one complete minus shaft for $60 that runs well. Will be swapping it out tomorrow. This video helped, thanks. Eventually ill replace the bearing in the old one but that is definitely not something I want to tackle right now.

@ghostofreagan3181 2 жыл бұрын

Just fixed my pas 266. Easy money. Your video definitely helped. Thanks

@smallengineguys 2 жыл бұрын

Glad it helped

@willienunez5280 2 ай бұрын

Thanks Big Guy very helpful BUT on mine you let go the trigger and safety and it shuts off? HELP

@smallengineguys 2 ай бұрын

just the idle screw on the carb. its the Phillips head one. turn clockwise a turn then when its idling adjust to where the head just stops spinning

@jeancottereau3259 3 жыл бұрын

Thank you for the video!! HUGE help

@smallengineguys 3 жыл бұрын

Glad it helped!

@NoNew42 10 ай бұрын

Have you found anyway to possibly loosen the stiffness of the trigger? Thanks

@josephjones2988 10 ай бұрын

You can't see what you doing the camera us moving to much.

@TheRustyRooster 3 жыл бұрын

Man those triggers are always getting broken

@smallengineguys 3 жыл бұрын

its been threw hell but ready for more again

@MechInvent Жыл бұрын

I'm building a paramotor and just wanted to see how this looked inside

@smallengineguys Жыл бұрын

use the hedge trimmer one it is capped off on top so bar only goes in to the bottom

@benjaminbass2065 Жыл бұрын

Thank you very much for the video! Once I found the parts locally was a breeze

@smallengineguys Жыл бұрын

Glad it helped!

@juanarredondo9312 8 ай бұрын

Puedes hablar español gracias

@keith2198 3 жыл бұрын

I was replacing my carb last weekend and lost one of the bolts on the handle. Do you know the size of those nuts?

@smallengineguys 3 жыл бұрын

first why would you take apart the handle to do the carb. second i think its either 4mmx1.00 or 5mmx1.00

@keith2198 3 жыл бұрын

@@smallengineguys haha. I have no clue why. I watched another video because it was idleing fast and they said the cord was to tight. I now know the truth. Haha thanx for the reply. Appreciated

@mgomez5606 3 жыл бұрын

T27 not in description.

@smallengineguys 3 жыл бұрын

sorry here you go amzn.to/33UKHQF

@mgomez5606 3 жыл бұрын

@@smallengineguys TY

@wagohowardmusic Жыл бұрын

Doesn’t say how to change length of line throttle… only Say yep There’s the throttle. Pulls. So if you can me here to see how to shorten the line and make the unit spin faster.. this ain’t the vid for you .

@smallengineguys Жыл бұрын

First it's a trigger replacement video. Second, what?

@bigfunky74 6 ай бұрын

Somebody woke up on the wrong side of their moms basement. It's a trigger replacement video bro.