@Reubenirion 2 жыл бұрын
ECM recommends purging the steam wand while the boiler is heating (for steam) so that there is more space in the boiler for steam to build up. I find that purging for 5 seconds, waiting 10s, and purging for another 5s is about right -- you'll get better pressure that way. Other than that, this is a very well presented tutorial.
@Wholelattelovepage 2 жыл бұрын
Good tip, thanks! We'll include that in future ECM videos in this series. AJ
@kenchestnutt8559 2 жыл бұрын
I recieved my Casa V a week ago. Everyday I get just a little bit better with it.
@Wholelattelovepage 2 жыл бұрын
Hi Ken, Thanks for the report!
@Senninha1960 Жыл бұрын
this video is made for people who have never seen a coffee being made before
@DJCJ999 11 ай бұрын
I like the look of this machine... it's what the Gaggi classic should be.
@Wholelattelovepage 11 ай бұрын
Hi DJC, Thanks for the comment. ECM is known for higher level detail in finishing - also costs more! Marc
@Fourwedge 2 жыл бұрын
The real thing that suprised me is how little room there is between the spouts and the drip tray. I need really tiny cups, especially if there is going to be a scale there too. I got my casa V today.
@miguelmeza5519 2 жыл бұрын
I just got my Casa V and yes I'm also surprised how low clearance there is!
@sciencescience9102 2 жыл бұрын
How do you like your casa so far? I’m planning to get one soon. Still doing my research 🧐
@robertomuhammad35 6 ай бұрын
Nice video . What should i do if i follow instructions but still not getting water cone out from group head. Maybe because the machine boiler become hot hot before turn pump on ?
@Wholelattelovepage 6 ай бұрын
Hi r, If you open the steam/hot water valve and push in the pump button (lower right) do you get water from the steam wand? If so, the pump is working properly and machine is drawing water but there may be a blockage in path of water to the group. If the pump does not turn on when you push the button then it's not operating for some reason. If pump comes on but no water from wand then there may be a blockage between the water reservoir and pump. If water reservoir is not fully inserted machine may not draw water. Could be foreign material in line or sticky one-way valve. If sticky valve then force priming the machine usually fixes the problem. To force prime, with the pump running slightly raise and lower the water reservoir multiple times. This helps force water into the system to free up the one-way valve.
@robertomuhammad35 6 ай бұрын
@@Wholelattelovepage thanks for your kind response . Its solved now the reason was the water tank it was only at 1/4 not full of water . When try same instructions with full water tank its work properly . Even that not mentioned in manual . Anyhow thanks alot
@Wholelattelovepage 6 ай бұрын
@@robertomuhammad35 Great to hear you worked it out!
@shannongoulie4085 12 күн бұрын
What about cleaning water basin mineral buildup?
@Wholelattelovepage 12 күн бұрын
Hi s, use a descaling product to remove mineral buildup: www.wholelattelove.com/collections/cleaning-products/products/urnex-full-circle-descaling-powder
@CharliesCanvas 2 жыл бұрын
Edited for clarity: When I’m finished brewing an espresso and follow up with using the steam wand to foam, after a brief purge of steam (to remove milk that might have come up into the wand during foaming), *if I do not wish to brew another espresso or use the steam wand anymore and want to shut off the machine*, should the steam be evacuated (by turning the steam mode button off and the brew mode button on) until a steady stream comes through the wand - is there any reason to release the steam and cool the boiler off a bit - prior to shutting the machine off? With my previous single boiler machine I always did this, but I don’t know if it’s necessary or perhaps just a good habit to get into. I just ordered an ECM Casa V from WLL, it’ll be coming tomorrow and I’m excited to try it. Thanks for a great video!
@cs512tr Жыл бұрын
nice video, 2mins after pulling a shot to texturing milk seems like a long time,
@bibamann 8 ай бұрын
Coming from a simple la pavoni which I just had to turn on and whether push the lever or open the steam knob this machine (arrived yesterday) is still black sorcery for me. Especially milk steaming. I either just get water or there's no pressure / nothing happens. So: the pressure-display just shows up when you do something, right? Not like a la pavoni which is under constant pressure. And after you made a shot, you need to push the steam button, wait until the light turns off, open the tap, wait till the water comes off and after that you'll get the steam?
@carlosvelasco1471 6 ай бұрын
I just purchased this machine. Does anyone know what the clear hose that came with the machine is for ? It was included and packaged with the tamper and portafilter
@Wholelattelovepage 6 ай бұрын
Hey carlo, clear hose is for force priming the pump. It's rather rare to need force priming. The hose would connect over the water intake nipple in the reservoir. As the machine is initially turned on and pump starts to fill the boiler water is manually pushed through the hose to force prime pump. If the boiler fills on initial startup force priming is not needed.
@adriennesmith6234 2 жыл бұрын
I have just purchased the ECM CASA V how do I know how much water is in the boiler - is it how many minutes/seconds you prime the boiler? Also why is it necessary to purge the boiler? If purging is required is this required after say 2 cappuccinos or after a few coffees. Does purging wreck the boiler. My old Breville croaked (brought in 2014) repaired once. I love my coffee so researched snd watched your videos and decided on the ECM Casa V due to the short heat up time and positive reviews. Thank you for your time.
@Wholelattelovepage 2 жыл бұрын
Hi AS, Thanks for the question. The boiler fills to the appropriate level automatically. Purging does not hurt the boiler. After steaming milk, be sure to cool down the boiler. To do that, open the steam valve and turn on the hot water switch. Allow the pump to run until you get a solid stream of water out of the steam wand.
@adriennesmith6234 2 жыл бұрын
@@Wholelattelovepage thank you for explaining much appreciated. I am making coffee efficiently now. With regards to steaming milk when you say “whole milk” are you talking about full fat. I live in New Zealand we have green which is trim which is awful, blue has more fat in it then we have silver which is what I call full fat milk with the cream. Reason I’m asking is I’ve tried to make a cappuccino with (the blue milk) I get foam/froth but When I go to pour the milk it’s watery and I end up with a milky coffee which i don’t like. Trying to perfect this and have thrown out a few coffees. Many thanks for your time.
@Goenzelsen 2 жыл бұрын
It is frustratingly close to my idea of a perfect single boiler machine. Please ECM, at least consider integrating a PID. I don’t think I’m the only one looking for a compact but capable machine.
@Wholelattelovepage 2 жыл бұрын
Hi Cornel, How about an ECM made, single boiler, PID, E61 group with flow control? They have one! Check out the ECM Classika: www.wholelattelove.com/products/ecm-classika-pid-espresso-machine-with-flow-control
@Goenzelsen 2 жыл бұрын
Hey there, Latte team. I'm aware of the Classika and it's a fine machine. However, I'm looking for something smaller regarding boiler size and dimensions. The Lelit Victoria looks promising. You may want to look into it some day ;)
@hom296 2 жыл бұрын
Hey gang. Where's your links to the two main products here (machine + grinder)?
@Wholelattelovepage 2 жыл бұрын
Good catch, thanks! I just added the links in the video description. ECV Casa V Espresso Machine: www.wholelattelove.com/products/ecm-casav-semi-automatic-espresso-machine ECM S-Automatik 64 Espresso Grinder: www.wholelattelove.com/products/ecm-s-automatik-64-burr-grinder
@eatdoku 2 жыл бұрын
is there a way to adjust the boiler temperature, my unit blast out steam during normal brewing
@Wholelattelovepage 2 жыл бұрын
Hi Eric, It should not blast out steam during normal brewing. Any chance you have the steam switch on when doing normal brewing? Or maybe you are not cooling down and refilling the boiler after steaming?
@eatdoku 2 жыл бұрын
@@Wholelattelovepage thanks, i ensure stream button was off, and I usually brew first before steaming anyways :) I confirmed with ECM that it's the problem with the temperature control or boiler. I'm sending the unit back for reparing :(
@publicname515 Жыл бұрын
Can I remove the Caution Hot Surface? Is it a sticker?
@Wholelattelovepage Жыл бұрын
Hi PN, Yes, it is a sticker and can be removed.
@davidhawkinson9797 2 жыл бұрын
That was an awfully wet puck!
@Wholelattelovepage 2 жыл бұрын
Hey David, A bit moist.
@davidisaiv 2 жыл бұрын
Hello, Do you have to pump water into the boiler before pulling a shot, or does the water transfer as soon as you start brewing?
@Wholelattelovepage 2 жыл бұрын
Hi David, On first use out of the box you need to prime the machine and fill the boiler, using the pump switch and pulling a little water out of the steam wand. After that, no need to pump extra water into the boiler when brewing - the brew still will activate the pump and do that for you. One caveat, after steaming milk, you'll want to cool down and refill the boiler before brewing again. This process is shown in the video at 13:45. AJ
@davidisaiv 2 жыл бұрын
@@Wholelattelovepage thank you!
@mbd8531 2 жыл бұрын
What a mess! I definitely wont be buying a single boiler.
@chadgregory9037 2 жыл бұрын
Not gonna lie, for a 1000 dollar machine, kinda feel spat in the face for such cheap tools to be included... what gives?
Кушать Хочу
Рет қаралды 6 МЛН
What the Meowk!
Рет қаралды 9 МЛН
Seven Miles Coffee Roasters
Рет қаралды 2,9 МЛН
Coffee Coach | Ryde Jeavons
Рет қаралды 79 М.
Кушать Хочу
Рет қаралды 6 МЛН