No video
ECM - How to clean the brew group.
Рет қаралды 119,282
In this video, ECM shows you how to clean a brew group.
We are using a Mechanika IV Profi (rotary pump) - part of the ECM family.
You require: One blind filter and either ECM cleaning powder or ECM cleaning tablets.
01) Insert the blind filter into the portafilter.
02) Fill the cleaning solution into the blind filter.
03) Clamp the portafilter into the brew group. Repeat the following process 5 times: Start the flush. Lower the brew group lever half-way and let soak for 10 seconds. Lower the brew group lever slowly so remaining water can be flushed from the release valve. 04) Unclamp the portafilter and clean it.
05) Re-insert the portafilter and flush 5 times as shown.
06) Repeat the cleaning about every 150 cups brewed.
Thank you for watching!
@grindstm Жыл бұрын
Helpful, pleasant video. Thanks 😊
@phizzak 2 ай бұрын
Do you fill the blind filter with powder and run it 5x or just 1x and flush with water only 5x?
@CS21dude 8 ай бұрын
can I use any detergent? I have a can of stuff made by Rancillio
@rohrek 6 жыл бұрын
Hi, My Synchronika’s brew group lever got harder to pull after a few cleanings, and there is a slight squeaking noise at the start of the extraction. Should/Can I grease/lubricate the brew lever?
@AlexMQQ2273 5 жыл бұрын
rohrek I’ve had the same issue with my Profitec Pro 500.
@firebladerio 5 жыл бұрын
try to clean the pump start button head.
@LK-hd5ct 4 жыл бұрын
Don't backflush with cleaning powder too often. I had the same problem and just reduced the backflushing. Only like once or twice in the evening and every two weeks with cleaning powder.
@charles_f 4 жыл бұрын
That’s why you pull a blank espresso shot afterwards. You removed the oils (coffee bean) so pull a shot will then put some of the coffee oils back into the mechanisms and good to go. You will hear squeak stop after a shot or two.
@Allabertina 10 ай бұрын
Thx. You deviate from the instructions that came with my machine.... And, the coffee starts tadting off after 50 brews, so 150 is just not practical.
@chilango7777777 4 жыл бұрын
Wie lange dauert jeden ,,Backflush''? z.B. 4-5 Sekunden?
@JCisGreater 6 жыл бұрын
Wie hoch sollte der optimale Brühdruck bei einer Mechanika IV Profi beim Bezug sein?
@ecmespressocoffeemachinesm6972 6 жыл бұрын
Hello! 9 - 10 bars
@keddyphotoeclecticphotogra6120 6 жыл бұрын
How do I Descale my new Classika?
@YoutuberJeremy 3 жыл бұрын
Is it safe to drink a shot of espresso right after this
@s.p.4029 3 жыл бұрын
Why not, after the 5-time-clear-flush the machine is ready to use...
@brendanconaway 4 жыл бұрын
Next time spend the piano money on narration please?
@YotamIshay 2 жыл бұрын
and spend more money on the piano too
@sudeshsingh9706 2 жыл бұрын
Hmmm you couldn't follow a simple video ?
Whole Latte Love
Рет қаралды 35 М.
Rinaldo's Speciality Coffee & Tea
Рет қаралды 19 М.
Sergio Outdoors
Рет қаралды 49 МЛН