Thanks, I really hope Ecovacs brings Yuko to their budget friendly models. They could also offer the X1 with a basic charger too.

@@RobotMasters Yes!

Go to the map section, bottom right corner. Verify a complete map. There should be area tab once you edited and create rooms for your map.

Still having trouble as well. I went to Map Management and dont see anything. Is the “map section” you referenced different?

Auto and Custom are both 'buttons' that can be tapped. They just like text. Took me 5 days to figure it out.

If I get a S10 Pro I will definitely talk about that feature.

Usually the robot can update the charger location without needing to remap.

I believe in the app there a multi map saving option. Than you tell it to create a new map. You will need to bring the station for that one time for Mapping.

Open Ap> Tap Enter Smart Cleaning>Tap Map Management (lower Left> There are three screens where you can save a floor map. Do not take the base station with you. Once it has finished cleaning that floor, It will let you know and ask to be returned to base station. Once returned to base station the map is saved. If all three panes are used, you will need to erase or overwrite one.

Just select a new map and you should see a quick mapping option.

So the Ecovacs have a self washing mop interval timer aka 10 minutes, where as the self emptying based on when the robot done cleaning the room or area. So if you want to do more self emptying within a room, schedule area cleaning and make each area smaller.

Hmmm I think you have to be careful to physically remove the mopping pads or the robot will pre wet the mopping pads if the are installed. The only other way is to try the schedule feature and specify if you want to vacuum or mop, I believe there option to specify rooms and set the mop and vacuum levels.

@@RobotMasters Thank you for your reply--awesome channel, and super helpful!

@@someguy5073 Sure have a good one ☝️

Hello, so once you have a 3D map, you have to manually add all the furniture and carpets into the map. It similar to creating and editing Cleaning Zones via the 2D map.

Go to the main Ecovacs Home Screen where you can see your map. Swipe from the bottom of the screen upwards. You will see the settings to change the vacuum and water levels.

@@RobotMasters AWESOME found it thank you so much!!!

Awesome 😎, hope you like the S7 MaxV Ultra!!! It by far one of the most impressive robots to date!!!

So how all three devices Smartphone, Dock and Robot are initially connected is through the same 2.4 GHZ Wifi network. There only a few models that support 5GHz networks. Once the initial pairing process has been established than the Smartphone can be on a different WiFi network or Cellular Network as long as it has an active data connection. The Robot and Dock are usually still connected to the original 2.4 GHz WiFi network. Sometimes the Robot will connect to the dock using Bluetooth or another from of short range connection. As for the Data being stored like the Maps, user settings and AI photos they are stored both locally on the Robot and encrypted through the company Data Cloud. Once you remove the Robot off the Acoount depending on what model, the Map and all other user data is deleted automatically. Some companies like iRobot will allow you to save your Data prior to deleting the robot off the account so you can restore the Data to a New Robot or the same robot. Most robot vacuum companies will keep the Data as long as you have the robot paired to a user account. So this allows the user to delete the APP from a Device and once the user installs the APP to a new device and log back into the same account the Robot's Data and map should still be there. Hope this helps explains things.

LOL, I may have to test out the excessive dirt feature. Thanks for sharing the adding room part. Can you delete portions too?

@@RobotMasters Nope unfortunately I don't see anyway to delete a room without deleting the map.

Mine just keeps doing the same rooms over and over

@@Wayniesgirl Hmmm does this happen if you press the clean button. I do you have room sequencing setup. The robot will always start with the room that selected first.

@@RobotMasters So, I just went into the app and added a new map. Did a quick map and it's now doing everywhere . Thank you so much

Try restarting your phone and see if the app loads the page

In the App just go to settings, maps and delete map. Or you could select new map.

@@RobotMasters That's what I did. Thank you so much 😊

Hahaha thanks 😊

Thanks for sharing your experience, good to know Ecovacs could improve the mapping and App experience and I hope they do.

Thanks for watching 😁

Hello sorry to hear about your Roomba. So yes iRobot has the ability to push updates to certain customers and they are not the quickest at doing so. My recommendation is to delete the iRobot App off your phone. Don’t worry everything is saved on the iRobot server Map, settings and user information. Also desert the robot WiFi holding the two outer buttons. Now reinstall the App, log into your account and link up the robot to the smartphone again. This may force the robot to look for recent software updates.

@@RobotMasters thank you. I will try. Will I still have my smart maps?

@@TheVacCorner Yes the maps will still be saved. Just make sure you log into the same iRobot account. I would try just the deleting the App and reinstalling the App first. See if that works. If not you can try the delete the robot off the account and reinstall. Sometimes the smart Maps take awhile for them to transfer over. It is finicky with my experience, so you might not want to risk losing your map.