Edelbrock VRS-4150™ Race & Street Carburetors

Рет қаралды 24,604

Күн бұрын

One of the most anticipated new-product announcements from Edelbrock at the 2021 SEMA Show is the introduction of the all-new VRS-4150 Race and Performance Carburetors. The VRS-4150 series carburetors are true race carbs that are street friendly in 650, 750, 850 and 950 CFM sizes. Edelbrock’s Manifold & Carburetor Product Manager Brent McCarthy and Product Engineer Wesley Cameron examine the many features that make the VRS-4150 series the best choice for race and street applications.
The new VRS-4150 carbs are available now with applications and pricing at www.edelbrock.com/vrs-4159-carburetors

Пікірлер: 71

@elreyyakko Жыл бұрын

Good job Edelbrock. Filling in the void that will be left when Holley goes full EFI.

@jerrycoon3369 2 жыл бұрын

Wow! Looks like Edelbrock really did their homework on these. Great adjustability. Nice job!

@jessicaembers924 Жыл бұрын

Jimminy, that's a lot of fricken jets!

@zAvAvAz 3 ай бұрын

Ok, now i want a 4500 series design

@johnbehneman1546 Жыл бұрын

THANK YOU SO MUCH!!! THIS CARB HAS ALL THE BASIS COVERED!!! THANKS FOR SHARING!!!

@williamsanders468 2 жыл бұрын

Amazing carburetors great for any build that you do plan on driving on the street and drag racing on the weekends.

@IggyEGuana 2 жыл бұрын

Great job Brent!

@stevoschannel4127 2 жыл бұрын

Need to pull the bowls for jetting still…are parts interchangeable with a holley? AND where is it made???

@SmackeysGarage Жыл бұрын

I'm looking forward to trying one of these out on my 390.

@oldcarguy6863 2 жыл бұрын

Looks like a killer carburetor

@css-centralspeedsupply103 2 жыл бұрын

We are excited for these!

@BOOT 2 жыл бұрын

Looks interesting, hopefully get to try one out someday.

@jamesspain5049 Жыл бұрын

After playing with old school double pumpers on a tunnel ram and street driving it, I see so much about these that are just awesome. With a O2 sensor and some thinking involved, these are going to be unbeatable. I am tickled I haven't bought a Carburetor for my simple old school dual point big cammed 460 project as they just made the sale.

@save16thave 2 жыл бұрын

The guys from Two Lane Blacktop would love this carb, they were always changing jets.

@jamesspain5049 Жыл бұрын

Check the points. Yep, still there

@tinkeringtrucker5196 2 жыл бұрын

Cool, edelbrock made a holley

@randylear8264 Жыл бұрын

More than that. Did you watch the video?

@captiansnickers5201 Жыл бұрын

Well Holley's going to stop making Holley 😂

@edvisme Жыл бұрын

I'd love to try one of these.

@liberaltears6328 Жыл бұрын

Uncle Tony's Garage likes it

@nnperformance76 Жыл бұрын

commented & liked & subscribed. awesome new technology for carbs. lots of older stuff is not getting the tech updates. great job. 👍 what about ignition? any ideas?

@barneymiller7894 2 жыл бұрын

Ok Edelbrock, you've got my attention 🧐

@DRaysShop 2 жыл бұрын

It's a Holleybrock... 😀

@shaneyoung5567 2 жыл бұрын

Will there be kits to convert it to blow through?

@davidvonanderseck8649 Жыл бұрын

Wow nice

@huskynox1 Жыл бұрын

I just picked up a new 1307 (750). Very nice carb, Very smooth power compared to the double-pumper its replacing, I attribute that to the very nicely done Annular Boosters. The only thing that was way off was the transition, it went from idle 13.0AFR to 15AFR, causing the motor to cough and stumble until the primary booster came in. I had to change the idle bleed from a 70 all the way down to a 42. I also tried a 36 IFR (from the stock 31), which basically had the same affect with the standard 70 idle bleed jet. I also changed the standard 4.5 Power Valve to a 8.5. The engine (445 Ford FE Stroker, Edelbrock Al Heads, RPM Performer, Comp Cam (230/236@.050, .530 lift) pulls clean and hard thru the power band at 12.5AFR, but at light load (cruise) it is pig rich at 10.5. I'm not sure what dial to turn to lean 'cruise' out? I've called Edelbrock Support twice with them telling me they have no literature on these carbs, so they have no idea what to do. This is pretty concerning and disappointing. Edelbrock? Anyone who has knowledge? Advise would be greatly appreciated.

@markh8301 5 ай бұрын

Try a bigger carb? 750 CFM sounds too small for a 440 CID motor.

@UcantBeSerious03 Жыл бұрын

oh wow I must have one or two

@TheAaronmh 2 жыл бұрын

Will there be a USCG approved marine version?

@grizzly766 Жыл бұрын

So is there a tuning class. E4150-101?

@saml3902 2 жыл бұрын

excellent tunability something I had to previously go to a carb builder to get. Looks like a lot of tricks from brasswell and BLP

@vinnylc 2 жыл бұрын

ya agreed, braswell is king of carbs i still want a custom one from him someday.

@69dodgecharger440 Жыл бұрын

Extra height only thing for me not much room with nitrous plate and air cleaner! Will buy one for my other car! Lots of cool things ✅

@Lagrange1186 2 жыл бұрын

I think the only thing not built into this from the start was capabilities for blow thru applications. But wow I can’t wait to see how this does on independent dyno testing. What’s the price point on this?

@vinnylc 2 жыл бұрын

with basic mods this has no problem as a blow through.it already has dual fuel inlets per bowl and brass bleeds through the carb to allow custom sizes for tuning. just add some vent tube extensions, with the annular boosters this comes with it should be able to keep up no problem, dog leg and straight leg boosters no so much but this should be fine.

@ryantucker5903 Жыл бұрын

When can they be bought and where

@tonycolca2241 10 ай бұрын

Is edelbrock going to come out with this carb with electric choke

@alrui Жыл бұрын

I assume (hope) it's made in the USA?

@TheMilchTube Жыл бұрын

Where the hell can I buy one ?!

@bertmorlas3534 2 жыл бұрын

Atta boy!

@superman4401 2 жыл бұрын

What is pricing. And can they be made blow thru?

@vinnylc 2 жыл бұрын

yes very easily, but you need to change the bleeds accordingly and add vent tube extensions for the idle signal to be stable

@michaelcannizzo1076 2 жыл бұрын

Any plans to add a vacuum secondary version?

@rebelscumspeedshop8677 Жыл бұрын

The way the venturies are wide like a salad bowl I'm willing to bet the CFM ratings are actually closer to advertised.

@johngossert3908 2 жыл бұрын

Looks great, but most people including Racers, can’t adjust a regular Holley correctly! Wait until they start monkeying with this piece! Lol

@vinnylc 2 жыл бұрын

I know, when im at the track i cringe seeing people change main jets for WOT, thats power valve jets 101

@mickangio16 2 жыл бұрын

But most Holley carbs don't have replaceable power valve restrictions. My complaint with Holley is that ALL Holley carburetors SHOULD have replaceable power valve channel restrictions AND replaceable idle feed restrictions. The additional 1/2" height of the Edelbrock is a drawback to me and I'd like to see a version with an electric choke with an easier to access fast idle speed adjustment than the Holleys and adjustable choke pull off. Holley needs to step up their game fer sure- especially for what they cost$$$.

@nelsonyurok Жыл бұрын

Noice!

@mrmoparrr Жыл бұрын

Also 2ndary optional Linkages “”

@bryandouglass9997 Жыл бұрын

Can you blow-thru this carb?

@jacobnorth8642 Жыл бұрын

I heard they specd a 5/16 " air cleaner hold down instead of 1/4" just for blow thru setups

@joe-hp4nk Жыл бұрын

People are going to be in more trouble trying to tune it than you can shake a stick at.

@pauldhiman8369 2 жыл бұрын

Holley

@Greasyoldmopars 2 жыл бұрын

Eldabrock been beating Holley for ever now they really just knocked it out of the park awesome carb I need one

@f430ferrari5 2 жыл бұрын

Unfortunately for Holley they made various acquisitions at the wrong time. They bought Hooker Headers, Weiand, Flowmaster, MSD, etc pre 2008. Holley filed for Bankruptcy in 2008. Many of the SEMA companies are struggling along. This industry could open back up more of emission controls were lightened up. Any car 30 years or older should be smog exempt. Maybe even 20 years for limited production models. Waivers should be available if you drive less than 500 miles per year.

@vinnylc 2 жыл бұрын

wow at first i thought it was a ripoff Holley and it kinda is but this looks really nice. this is basically a modified Holley with all the tricks you would have to buy separately but with the Eddy its standard. if you really know how to tune a carb this is a one stop shop purchase. the fact that you can change Boosters on the fly without sending it to a carb specialist because of the required tools to press them in and out properly, this makes it more user friendly than the Holley. They really did their homework on this and im waiting for it to come available so i can by one for my BBC. the ONE thing i wish they would have redesigned is the way jets have to be changed, the need to take off the fuel bowl and swap jets with the risk of leaks is not only a pain in the ass but can be a danger at the track when making changes. Maybe drill 2 holes in the fuel bowl with plugs so you can stick a jet tool with a magnet inside without removing the bowls and breaking seals???? but I this is still a nice product and cant wait for mine. And for the people asking about Blow through Applications yes this will work you just need to make sure the jets and bleeds are calibrated correctly and add vent tube extensions to the top tubes and you can run boost. Thats all that really separates a standard race Holley from a blow through. You can even run this on Alky if you want to do the math and make custom bleeds and jets.

@rebelscumspeedshop8677 Жыл бұрын

Lol yey.. Edelbrock finally gets complicated..lol

@walkinshawkiwi 3 ай бұрын

Its just a Holley copy

@joe-hp4nk Жыл бұрын

Too funny, there's more tuning than you can shake a stick at.

@Kokaiinum1 Жыл бұрын

Okey shit... Iam going EFI... Iam going to be an old broke man before that carburator Will be jettet right on whatever i build, Jesus christ thats alot of jets.

@jetmr_5043 2 жыл бұрын

Man, I Wonder who invented the 4150 and already has used most of these features… Hmmmmm

@KingJT80 2 жыл бұрын

This carburetor is actually taller than that one company which is interesting

@mikewilliams344 Жыл бұрын

Barry grant. NHRA screwed the man.

@robpeters5204 2 жыл бұрын

Looks like edelbrock took a page out of the Chinese handbook. Just copy Holley carbs.

@barneymiller7894 2 жыл бұрын

Kind of, but you'd have to go to a custom built Holley to get the same features 🤷‍♂️

@PerformanceEngines 2 жыл бұрын

they are now the same company

@Chevysrule454 2 жыл бұрын

So edelbrock copies holly. Hmmmm wonder how holly feels about that

@anthonyreyes-brown467 Жыл бұрын

Well from what I hear holly is ending production on they're carburetors and going strictly efi so I don't think they care. We should be saying thank you to edlebrock for filling that void

@chrissybert6543 Жыл бұрын

There will be no more production of carb applications from holley. I have been trying to find a split plane race manifold for carb for a ls3. Can't get it, they are not making it anymore even though they are still for sale in jegs and all the big parts salers.

@graydonjones6912 Жыл бұрын

So you just copied a holley carburetor?time to hire someone who can come up with a new carburetor not just copy another piece and say that you have improved it