70 years later and they still will not use center bolt valve covers
@whatroads4x48 күн бұрын
This thing is like 7k. Might as well put a v8. Math doesnt make sense
@user-rp2zh8lj2m10 күн бұрын
Do they make them for a 351w
@joshwilliams691011 күн бұрын
Can this supercharger be rebuilt? I’ve googled and can’t find any parts for the Edelbrock e force.
@burrvisiontv12 күн бұрын
Whats the part number for the Washers for the banjo bolt on the fuel arm?
@alanmeyers395715 күн бұрын
I don’t use lube, I just use oil, the lube creates a barrier and retards the oil, but whatever.
@Titan-uy1qy16 күн бұрын
Yes..... I shall be purchasing one very soon. Thank you sir. God bless
@anthonydelee20 күн бұрын
How much is this motor in a turnkey form
@Chrisp_az21 күн бұрын
I have a stock 5.3 Vortec in my 04 Yukon..planning to cam with my first Edelbrock. Already have my cold air and exhaust. What would you recommend for a daily driver looking for some fun?
@phoenixrisingharley24 күн бұрын
Hi we are in Australia, we have a custom built engine, 350 chev with edelbrock heads and manifold ............. we need to install the temp sensor what are people doing since there is no threaded place provided , thanks. Is the only alternative to put temp sensor inline radiator hose.
@johnbehneman154624 күн бұрын
GREAT FOR ANY APPLICATION.
@johnbehneman154624 күн бұрын
HIGH QUALITY PARTS SPOKEN HERE.
@richardgetsitdonedone624624 күн бұрын
Can I keep my intake ?
@belloa302624 күн бұрын
So the hole on the adapter goes on back side?
@justahick323625 күн бұрын
What could be the eeason a 350 sbc loudly pops and dies when i rev it up from a stop
@AHeuvelman-su8ji25 күн бұрын
Verschrikkelijke muziek, denk u zo de mensen zand in de ogen te strooien? Wilt u liever dansen, dan een goed product maken?
@Haffschlappe27 күн бұрын
Dont sell Comp crap
@Haffschlappe27 күн бұрын
I dont buy comp products
@ckwireyАй бұрын
Curious if the current kit Edelbrock has for the 3.6l Wrangler will work in the 2024 model? If not, is Edelbrock going to create a kit for it?
@donaldbingham8990Ай бұрын
It looks like the price starts at $2,261.95 not $1599.95 as claimed.
@grizzlygamingGGАй бұрын
Where did you connect the vacuum line for your brake booster?
@revolutionday1Ай бұрын
Say I wanted to run this head on a 2002 (WJ) Grand Cherokee.... Could I get away with retrofitting the older style exhaust manifold, and keeping the stock cats etc., or do you absolutely have to find something aftermarket in a header configuration?
@Travis8126Ай бұрын
Confused why someone would do this on a Coyote with factory EFI which is pretty rock solid. Totally get it for a pushrod carbureted engine. I am running the PF4 on my Dart 427 and it has been great.
@merakrutАй бұрын
I bought some cheaply made heads for my c4 corvette. The heads were bent 2.6mm between in the middle when I placed them together. I torqued the mid bolts first, so I could find out how much torque was wasted to make them flat. The heads are the crappy Edelbrock RPM, Poorly made in the U S A.
@user-iy1uq9xf5jАй бұрын
is the foundry still functioning?
@mekial2222Ай бұрын
I have my 1405 on my 289 set to the top whole is it's VERY responsive... I've been have a stumble or rpm drop on braking and turning though, I'm guessing a float adjustment is needed... just not sure which way to go with it...
@mechi1430Ай бұрын
Hello, how are you, sorry, I wanted to know if these cylinder heads are also for Y Block 292 engines, thank you very much for everything.
@johnbehneman1546Ай бұрын
THANK YOU SO MUCH. THE PERFECT UPGRADE FOR ANY DAILY DRIVER. ESPECIALLY WITH THE HIGH COST OF GAS.
@johnbehneman1546Ай бұрын
THANK YOU SO MUCH. EDELBROCK DID THE HOMEWORK. SO, YOU DO NOT HAVE TO. YOUR ONE STOP SHOP FOR ALL THING HIGH PERFORMANCE.
@deerslayer5863Ай бұрын
Now make the avs 3 with 4 annular boosters
@CarputingYT2 ай бұрын
This gentleman has a great speaking voice
@jeremy01952 ай бұрын
Where are the pieces cast? Not assembled where is it made?
@sweetgomez85292 ай бұрын
Y'all make this for BBC?
@zAvAvAz2 ай бұрын
Ok, now i want a 4500 series design
@ManojNazir2 ай бұрын
Dear sir we are the foundry of cylinder head in china
@walkinshawkiwi2 ай бұрын
Its just a Holley copy
@ashaw8012 ай бұрын
Really useless vid. Unless you're a total Gump.
@latoren822 ай бұрын
Just installed an elderbrok and that’s exactly my problem. If I’m barely on the throttle it surges or as I’m coming off the throttle it surges until I stop or even sometimes when I’m stopped. Guess I have to go back to the mechanic.
@airlife2u3 ай бұрын
Thank you for sharing your video.😊
@d.l.horton20933 ай бұрын
I never gave Chrysler a second look until they came out with the Hemi. When I found that they crap valve seats and cams. I wish I never heard of the Hemi. I wish I still didn't love them. Even with all their flaws I still find them better than most engines. Sorry to hear its not going to be around anymore.
@jodaddysdodgegarage35333 ай бұрын
They clearly misspoke and mislabeled the shot. If you look at the video the dotted line under the lifter is convex but the voiceover and on screen text say concave. Producer-idiot mistake and talent is simply reading off a teleprompter.
@stevenr86063 ай бұрын
😡 NO ONE HELPED ME IN 2002 WITH MY CONVERSION. 😡 I DID IN ON MY OWN❗️ AND WON (🏆 1st Place) in the Hawai'i Top Truck Challenge in 2003❗️ No thanks to Holley or Edelbrock 🤬
@lonzgarage3 ай бұрын
Awesome. Thank you for the tip!
@deerslayer58633 ай бұрын
Will the vrs work with big cap hei distributors
@rafaeltorres28863 ай бұрын
Will these work on the 87-90 4.0 Renix
@ml93423 ай бұрын
This video is six years old. Is it emissions legal now?
@johnbehneman15463 ай бұрын
THANK YOU SO MUCH. I LOVE THE JEEP 4.0 MOTOR!!!!
@XxFalametartxX3 ай бұрын
So would I need to keep that tablet hooked up to my k5 Blazer while I drive?
@bobbydelamar6064 ай бұрын
That doesn't work. My car still won't idle unless I hold the throttle.