EdgeTX Bootloader Masterclass • Learn How to Flash Your Radio Like the Pros

Рет қаралды 31,124

3 жыл бұрын

In this video we're going to stop playing around and get down to business with the Bootloader. When you learn to control the bootloader, you'll be able to flash your radio between OpenTX and EdgeTX at will. You'll also be able to quickly and easily update your radio when you've made the migration to EdgeTX.
LATEST COMPANION (as of 8/7/21)
www.open-tx.org/2021/07/23/op...
LATEST EDGE FLASHER (rolling release)
github.com/EdgeTX/flasher/rel...
RCVR CHANNEL LINKS
► Support the work I do here on Patreon: / rcvideoreviews
► RC Video Reviews Website: rcvideoreviews.com
► Discord - Hang out with the RCVR Crew: / discord
► RC Pilot T-Shirts! teespring.com/stores/rcvideor...
AFFILIATE LINKS
► Amazon Affiliate: amzn.to/3lEz5ZL
► Banggood Affiliate: www.banggood.com/custlink/3DD...
#RCVideoReviews #edgetx #opentx

Пікірлер: 300

@edhodgson6725 2 жыл бұрын

I never comment on a tutorial video, mostly because they’re horribly edited, uninformative, and usually leave me even more confused than I was before searching for a tutorial video. I got a Radiomaster TX16S today. I literally took it out of the package and followed your video as I was handling it for the first time. This was 26 of the most helpful and useful minutes of my life. Thank you so much!

@RCVideoReviews 2 жыл бұрын

Glad the video helped you out.

@rayconverse7618 Жыл бұрын

Unfortunately I didn't watch this first so 3 hours were spent trying to figure out why the radio and computer software wouldn't communicate. After watching this video, I was done in about 15 minutes with the radio updated. Thank you!

@siingsing2187 2 жыл бұрын

You are the king of tx16s.you play it well.but i played by tx16s many many time.😢😢 you are best.

@sunsetpark_fpv 2 жыл бұрын

Wow this is.....just......frickin....INCREDIBLE. Thank you for this - NOW "BOOTLOADER" actually makes sense......

@RCVideoReviews 2 жыл бұрын

Glad to help.

@Ice-FaceMedia Жыл бұрын

I DIDNT THINK I COULD DO IT SO FAST, NOT THAT BAD......ITS AMAZING TOUCH SCREEN!!!................THANKS MY FRIEND.

@PilotInstitute 2 жыл бұрын

What a fantastic explanation. Absolutely the best way to flash EdgeTX. I will be using your video for all future students in my course.

@RCVideoReviews 2 жыл бұрын

Awesome, thank you!

@anthonyzanze5946 2 жыл бұрын

The best ts16s vids, watched most of them two three times each!

@williamcox3852 3 жыл бұрын

Couldn't get any easier. Great video John. This will help a whole lot of people.

@RCVideoReviews 3 жыл бұрын

Thanks Bill. I hope it does. Even for those leaving thumbs down.

@donaldputtenaers79 2 жыл бұрын

Thanks, the flash did not work at first, but the SD card flash works!!! So easy to do 👍🏻 Thanks man grtz from belgium 😁

@cohibamatt8117 2 жыл бұрын

I followed the steps that were described here and I did run into problems. My radio would not turn on. The lights would come up but nothing else. If this happens, don't panic. Download the edge TX flasher and plug in the USB and re-flash with the edge tx flasher he showed in the video. My first time I used the flasher it didn't work either. I did it a second time and it came up and every thing works. Now I can go back and fourth as he does in the video. Great job with the video and Thanks for helping the community.

@tobiasoreteg9598 3 жыл бұрын

Thats perfekt! I'm so glad you did this video. After I followed JB's video on it I thought I bricked the radio, but it works great now thanks to you.

@RCVideoReviews 3 жыл бұрын

Always glad to help.

@merakifpv2500 2 жыл бұрын

Exactly the same happened to me! Thanks so much for this video 🙂

@maxun1 Жыл бұрын

wow my computer did not reconized open tx companion, so I got the radio for a year with open tx, and tonight I said lets do it is a new year and founded you video, I said lets do it and guest what! works like a charm. Thanks so much.

@RCVideoReviews Жыл бұрын

You're welcome. Glad to help.

@bentslattsveen2208 Жыл бұрын

Nice and clean - thanks RC Video Reviews🙂 Winter is coming and finally I have time to move from OpenTx to EdgeTx. Will proceed to how to convert models, images etc. from SD card👍

@RCVideoReviews Жыл бұрын

Enjoy the new firmware. It's awesome.

@PIDtoolbox 2 жыл бұрын

This is the go-to vid on flashing opentx or edgetx! Thanks man for clarifying all this. This info goes a long way

@RCVideoReviews 2 жыл бұрын

Glad it was helpful!

@gfurey9163 Жыл бұрын

Thanks man, I have looked at plenty of videos that didtn work. This tutorial worked first time. Appreciate it man!

@RCVideoReviews Жыл бұрын

Glad to hear it

@SuperBlazer20 Жыл бұрын

Great video. Just updated my TX16S. Looks and sounds great

@RCVideoReviews Жыл бұрын

Very nice!

@sstfpv8651 2 жыл бұрын

Gold, absolute gold. So easy. Now a repo of EdgeTX builds with various build options (like noheli, lua and so on) would be awesome, so one can further customize their build. Thank you for this no hassle method!

@RCVideoReviews 2 жыл бұрын

Glad to help :)

@fartpolice666 2 жыл бұрын

oh hey fancy meeting you here

@woofie7520 3 жыл бұрын

Great video John. Keep it up.

@RCVideoReviews 3 жыл бұрын

Thanks, will do!

@deezyfpv 2 жыл бұрын

Thank you for this. Much appreciated.

@arminwagner4189 2 жыл бұрын

This is great stuff man! Thank you! Please now do the follow-up video on how to do and handle with SD card content when switching back or forth.

@RCVideoReviews 2 жыл бұрын

Use different cards. That’s the best thing you can do to avoid having your models changed in a way that can’t be changed back.

@agpereirav 7 ай бұрын

Awesome video!! Solved all my connection issues, so no conectionns anymore, thank you for the video!

@RCVideoReviews 7 ай бұрын

You're very welcome.

@alefpvc.r.4540 2 жыл бұрын

Thank you so much for making this video. I got edge installed very smoothly.

@RCVideoReviews 2 жыл бұрын

Good job! Edge is excellent. Best Radio firmware available IMHO.

@ROBERTLAYTON-ff3nn Жыл бұрын

your a god, I've been messing around for days, all good now, cheers buddy

@RCVideoReviews Жыл бұрын

Glad you got squared away. With this info under your belt you're in the driver's seat with the radio.

@garrykraemer8993 3 жыл бұрын

John, you forgot to tell everyone to 'select' the proper radio configuration in Companion before downloading the firmware! I have a Horus 10, X9D, X9D+, and a TS16S! So I 'must' select TS16S radio configuration to download the proper firmware! I use Companion to update all my Frsky radios, so Companion may not be set for the TS16S, like yours was! Awesome video, This is what I have been doing! Sure beats copying across the USB cable! Keep them coming!

@RCVideoReviews 3 жыл бұрын

I didn't really forget. This wasn't really meant to be a Companion training video. I wanted to stay focused on the bootloader. It's a fair point, but on a fresh install of Companion, it will force you to create a profile.

@RyanCooperOfCapeTown 2 жыл бұрын

Thanks for this! I was stuck at getting my TX16S into DFU mode, but dumping the firmware on the SD card bypassed all of that silliness.

@RCVideoReviews 2 жыл бұрын

Glad you got it.

@bradleypowell8228 2 жыл бұрын

Thank you so much for this video.....I've been nervous about doing this and this is awesome....thanks so much.

@RCVideoReviews 2 жыл бұрын

You're very welcome. I'm glad it helped you.

@vladz1177 2 жыл бұрын

Got here from Joshua. Many thanks!! Guys, you're great!

@RCVideoReviews 2 жыл бұрын

Welcome!

@h2o-fpv623 3 жыл бұрын

this is a process that u need to pay attention if not then u have to go back and start from where u made the mistake really and in my case i do have to watch the video over and over again because of something i miss thank men for a great video

@bobfin4291 2 жыл бұрын

Thanks man I have the Eachine TX16S this was great to watch.Owned ar 3 moon's Cheer's CE

@alejandroviola6077 2 жыл бұрын

That is very straight forward. Thanks for the video makes my life easier!

@RCVideoReviews 2 жыл бұрын

You're welcome. Glad to help.

@thompaulson5152 2 жыл бұрын

I have watched this video 5 time and probably will watch 5x, thanks teach

@RCVideoReviews 2 жыл бұрын

Glad you found a reference you can use. Thanks for the comment.

@barnyard5176 2 жыл бұрын

Yesss! The only vid that worked for me, thank you!!!

@RCVideoReviews 2 жыл бұрын

Glad to help. You're very welcome.

@gavinlarissa 2 жыл бұрын

Subbed! Your videos are great.

@RCVideoReviews 2 жыл бұрын

Welcome aboard and thank you.

@Deathwish_fpv 2 жыл бұрын

this looks much easier than doin this on the computer....great vid

@RCVideoReviews 2 жыл бұрын

This is the way I do it..always just put the file in \FIRMWARE and flash from bootloader. It is fast and always works.

@Deathwish_fpv 2 жыл бұрын

@@RCVideoReviews so the tools part that didn't show up is it the same process to add that

@bennyeyeballs880 2 жыл бұрын

If you were in front of me I would bow to you lol you made this so simple compared to other KZfaqrs

@RCVideoReviews 2 жыл бұрын

Thank you for the kind comment. I’m glad to have helped.

@AlexBongRCFunLand 2 жыл бұрын

Thank you!! i'm looking way to make my Radioking TX18s touchscreen work! will be try out this EdgeTX and see. Only I have to migrate my models memory in my T18S.

@greghill9869 2 жыл бұрын

Mate, this is great, so easy. Thanks.

@RCVideoReviews 2 жыл бұрын

You're very welcome!

@pofotiouzois 2 жыл бұрын

Very helpful! thank you

@RCVideoReviews 2 жыл бұрын

You're very welcome.

@williamwhitfield5571 2 жыл бұрын

Great job, just did this, works

@RCVideoReviews 2 жыл бұрын

Nice work!

@majidalhooti1693 7 ай бұрын

It worked........ Thank you

@reefercrazy1 2 жыл бұрын

this was fantastic much appreciated @rc video reviews im good to go

@RCVideoReviews 2 жыл бұрын

Glad I could help

@reefercrazy1 2 жыл бұрын

@@RCVideoReviews very interested in getting personal screenshots uploaded to the radio and do you have a suggestion for a better sd card

@reefercrazy1 2 жыл бұрын

@@RCVideoReviews love the touch screen capabilities

@BAMDrones-MichaelBelshe 3 жыл бұрын

Thank you for this video! I kept getting an error when trying to install Edge. This fixed the problem!

@RCVideoReviews 3 жыл бұрын

Great to hear!

@terrordactyl4425 3 жыл бұрын

Thank You John

@RCVideoReviews 3 жыл бұрын

You're most welcome.

@nh-eq6bt 2 жыл бұрын

Thank you very much ..you are the best

@scott9141 2 жыл бұрын

Hi. Thank you for taking the time to do this. I was having trouble with my Zorro 4in1. Everything was fine, then the bound settings all disappeared and I didn't know how to re-flash. I have learned how to do that, so thanks again. I still can't bind anything any more, but at least I can re-flash!

@scott9141 2 жыл бұрын

Actually, I can't even turn the radio on again. Ain't technology wonderful.

@thutch8097 2 жыл бұрын

And that’s what backups are for!😊

@h2o40fpv Жыл бұрын

This inf its so important thank for all the inf u giving us.I dont think no one want to go to open tx .

@RCVideoReviews Жыл бұрын

EdgeTX is definitely blazing the trail with development. OpenTX remains a solid platform for those familiar with it and who don't need/care about what EdgeTX offers.

@sstfpv8651 2 жыл бұрын

Concise, thanks, no bullshit

@anthonyzanze5946 2 жыл бұрын

Here goes, I've tried to do this but finding it hard. This one seems to be the way to go. I'll let you know when I try this but first I'll watch the vid another 5 times before I start!

@RCVideoReviews 2 жыл бұрын

This method just works 100% of the time.

@AA-cq7pl 2 жыл бұрын

Wishing I had seen this one before the other one with DFU.. now I know what The FU stands for….😂

@11111Rich Жыл бұрын

Thanks!

@RCVideoReviews Жыл бұрын

You're welcome. Thanks for hitting the tip jar.

@AddictedRC 3 жыл бұрын

Ridden hard, and flown harder!

@RCVideoReviews 3 жыл бұрын

Funny right? That really made me laugh.

@lasersbee 3 жыл бұрын

Good explanation on SD card use of the TX16S. I've not yet used OpenTX Companion to load files onto my SD card. BTW... I just copied the 2 files to my desktop and the latest EdgeTX firmware (as of this Comment) seems to be edgetx-firmware-merge (the one at the top of my edgeTX Flasher Screen).

@RCVideoReviews 3 жыл бұрын

You might need to refresh or something. As you saw in the video, main is the branch you want.

@lasersbee 3 жыл бұрын

@@RCVideoReviews Re-installed the firmware and the Merge copy is at the top of the list. Here are time stamps on my screen for the Merge and Main versions as of this comment. Merge -2021-08-08 T06:44:04Z Main --- 2021-08-07 T06:52:09Z The Merge looks newer to me. Am I wrong or does it not matter that Merge is at the top of the list and is a newer file?

@paolo9535 3 жыл бұрын

5 star tks, super super easy

@RCVideoReviews 3 жыл бұрын

Thanks!

@barrydunkley9613 2 жыл бұрын

Thank you so much you are very much appreciated sir.

@RCVideoReviews 2 жыл бұрын

Thank you for the kind comment. I'm glad the video helped.

@barrydunkley9613 2 жыл бұрын

my pc will not let me download edge tx . Can you help?

@barrydunkley9613 2 жыл бұрын

Got it working great stuff

@billfpvtrain 2 жыл бұрын

U are great!!! Thank u so much. All another things dont work.

@bamatube5318 2 жыл бұрын

By following your steps, I was able to get Edge running on my X-lite, but my OpenTx models to didn't sync. I used EdgeTx Companion, and the Write Files button, which worked. I also wasn't able to get the EdgeTx soundpack, but downloaded the files off EdgeTx and transfered them on the SIM card. Thanks for this video!!, and I hope that helps someone

@Yogenh 3 жыл бұрын

never mind I got it working

@jeffirwin485 2 жыл бұрын

This is a FANTASTIC VIDEO - it eliminated a bunch of questions I had as to whether I was doing it right - but - I'm still having a ton of issues with the card. Even though I have all of the files on the SD card and EDGETX loaded up, it shows no files on the SD card.

@jeffirwin485 2 жыл бұрын

Reading the comments below, someone had the EXACT same issue I did. You totally solved it with that the card was bigger than 32GB and formatted as NTFS. Reformatted the card, added everything back onto a smaller card and bam, done. THANK YOU FOR THE GREAT WORK YOU DO CREATING CLEAR AND USEABLE CONTENT!

@RCVideoReviews 2 жыл бұрын

Thanks for the comments, very glad to know the videos have helped.

@TAllori13 Жыл бұрын

spent four hours trying to flash edge tx to my radio with a different video next watched this and got it first try. thank you so much for making this easy

@RCVideoReviews Жыл бұрын

Excellent! Way to stick with it. Now that you have Edge, it should be much easier to update going forward.

@scrc511 3 жыл бұрын

Hi John, it’s funny but this is how I do my flashing back and forth 😂 By the way I received my RadioMaster Max Talon Edition and since I only have 3 Heli’s think I’m gonna run EdgeTx in it. Thanks John

@RCVideoReviews 3 жыл бұрын

There are a lot of people unsure of what to do about the OpenTX bootloader. Now they at least have a video showing them 100% of the options available.

@scrc511 3 жыл бұрын

@@RCVideoReviews Yes John, it’s a good way of teaching them all those other options. Believe me, at the flying field I go to most of the people I fly with flying helicopters has Vcontrol Radio, and whenever they see me out there with my RadioMaster the fist question all the time is if it’s hard to use as far as programming. Most of them really can’t deal with programming and updating the radio when they need to, some of them rely on others for setup and updating the radio. I told them how great RadioMaster is, that there’s is plenty of tutorials out on KZfaq now a days. One guy at the field has Vtouch a $1300 radio, he was having a hard time updating it at one time and ended up messing it up but it’s fixable, he end up getting another vtouch 😂

@shaneellasdaicastrestorati3675 2 жыл бұрын

Oh man I hope it works out this easy for me to flash my q7x I've not even been able to use it after I tried to update opentx to it.

@matthewwilken2051 2 жыл бұрын

best one i've seen yet, i almost tossed this radio and went back to my ix12 or x9. now if i can just understand this frysky issue . i understand the difference between accst and acess but i have a xm accst 2.12 i thought it would bind to my taranis x9 because its still acsst. but it doesnt.am i correct that you can put any n access but not accst on non frysky hardware. as they made it exclusive so no 2nd or 3rd party selling receivers im guessing. thanks again!

@atamargo99 Жыл бұрын

Thamks a lot for you video. I just applied on my radio Master tx16s MarkII. I just have a problem with the telemtry. Do you recomend to load the multi protocolo? When i tray to bind in multi futaba shome module status no telemetry detect..... Thanks in advance, but i can bind my new radio with any model

@FlyZoneFpv 2 жыл бұрын

This is great . Thanks for such a great tutorial on this. 👍 I’m having a issue on my Tx16 s max. After I downloaded and put in the the edge tx it’s not recognizing my external or internal module. And nothing will bind and I have crossfire as my external . It also says no multi Telemetry detected . Why is that can you please help . I’ve been going nuts over a week on this trying to figure it out. Hope you can help . Thanks 🙏🏻

@RCVideoReviews 2 жыл бұрын

Check your baud rate. Set it to 115,200.

@muhammadsteinberg 24 күн бұрын

Great video! I got firmware loaded but Taranis x9d+ doesn't appear to have an option that updates bootloader under sdcard.

@Sarthe_Vader 5 ай бұрын

Hi, just wondering if you could advise on how to make a change to the bootloader. I have rewritten some of the code relating to the Status LED on the front of my Boxer radio and simply want to overwrite the existing file with my amended one. No matter what i try i can't access the file system within edgetx bootloader. Thanks.

@anthonyzanze5946 2 жыл бұрын

Edge comes with elrs lua already installed! That's enough for me. Touch is better than nirvana.

@budokaiboy Жыл бұрын

Hello, When I put the firmware binaries on my sd card on my pc and then place the card back into my Zorro, they are gone when I go to the firmware folder where I put them. Also, if I go into to DFU mode the old firmware keeps showing back up?

@egonverleysen695 2 жыл бұрын

Hey and thank you for this video, still thinking of changing to Edge on my TX16s but I have to ask, is the functionality the same as OpenTX? As I have seen, after migrating to Edge the only you need to do is setup your screen again, right? Or do you have setup all your aircraft again? Thx again for the awesome video’s!!

@RCVideoReviews 2 жыл бұрын

I'm not aware of anything that can be done in OpenTx that cannot be done in EdgeTX. Here's a video showing what to expect when migrating: kzfaq.info/get/bejne/gNKbrdBmt62WfGg.html

@jerryghoujalou5150 2 жыл бұрын

Can you do the same way for sound to get the new version of it please let me know

@TDPro1 3 жыл бұрын

Oke, by jhos bardwell.. this more simple than your latest tutor.

@fpvkabo 2 жыл бұрын

How do you flash boodloader on NV14, if long press on the edgtx file under firmware copy-delete-rename ? Never mind, used Edger flasher, had problems, ran impulsedriverfixer which if your dev is in dfu mode, it will load the dfu driver and flasher did it's thing.

@chesterjohnson1695 Жыл бұрын

Question??? Could I download the opentx and the edgetx files that you put on your desktop to a iPad Pro connect a card reader transfer the firmware to the card and put the card in the radio and then update like you explained it works the same way for camera firmware updates on a iPad thanks

@RCVideoReviews Жыл бұрын

As long as you can write to FAT based SD cards from your iPad, I don't see why not.

@jasonstation Жыл бұрын

14:05 'yes' 🤣

@RCVideoReviews Жыл бұрын

Fun little easter egg. I don't even know where that came from.

@terminsane Жыл бұрын

any chance you could do tutorial for LUA programming on edgetx? basic overview of how it all works?

@RCVideoReviews Жыл бұрын

Not much of a chance.

@beefybeef1326 Жыл бұрын

Brilliant tutorial- thank you. I baught a second hand tx16s and its got a load of old model files and stuff from the previous owner as well as an old version of open tx. I want to install edge tx and literally do a fresh install. Should i format the sd card and then make a "firmware" folder and then flash edge tx firmware or should i leave the old folders? Do the old folders get overwritten after the firware update?

@RCVideoReviews Жыл бұрын

Old folders do not get overwritten in a firmware update. If you use the EdgeTX flasher or buddy to setup your SD card they will, but not just for flashing.

@beefybeef1326 Жыл бұрын

@@RCVideoReviews thank you!

@christopherreyes5245 Жыл бұрын

Hi john, my radiomaster is tx16s (se) edition opentx , can i convert it to edgetx firmware. Thanks.. Please answer back thanks again

@RCVideoReviews Жыл бұрын

Yes.

@kheshavdheereess5243 2 жыл бұрын

Hello, I've flashed my qx7 to edgeTX, I'm using a crossfire v2 module and for some reasons I can't access the module through my transmitter. I cannot see the Power and other options in the tools page, only things showing up are the "bind, multi-bind and region". Any idea where I screwed up?

@RCVideoReviews 2 жыл бұрын

Check the baud rate and make sure it's set to 115k or lower.

@samavella8831 3 жыл бұрын

Thanks for the great video. This may have been asked before, but I’ll go ahead and ask again, just in case it hasn’t: (1) Does it support Yapoo Horus Mapping and LUA scripts; and (2) Will it eventually import the OpenTX models such that you.don’t have to reconfigure the look and feel of the imported OpenTX Models? Thank you.

@RCVideoReviews 3 жыл бұрын

It supports LUA now. In fact, they're working on incorporating LUA screen presses, and button capture to extend the functionality of LUA. As to Yapu and Imports--I don't know the answer to those two.

@samavella8831 3 жыл бұрын

@@RCVideoReviews Thank you for your reply. Having an established relationship with the developers, would you be so kind as to ask the developers about the Model imports and the Yapu Horus scripts.

@NiclasHorn 2 ай бұрын

thanks to this process i did see what my issue, the SD card reader slot on the motherboard of the radio is dead. luckely it was not my Jumper T18 radio, but sadly on my friends backup radio RadioMaster TX16S :(

@RCVideoReviews 2 ай бұрын

On the TX16s, does it read/store models and radio setup information?

@jeffgarver4137 7 ай бұрын

i have TX16s that came with opentx. I downloaded and flashed my radio. It is working but it is taking a long time to boot up. Any suggests??

@RCVideoReviews 7 ай бұрын

Double check you have the right firmware. Also, just to test, rename your SOUNDS folder OLDSOUND. When everything is correct, it doesn't take EdgeTX any longer to boot.

@Deathwish_fpv Жыл бұрын

Is all these steps the same on a new sd card

@alantoseland6629 3 жыл бұрын

Hi John, I following this with interest. Just one question I see in the list for transmitters there is Horus10, but not reference to which model (ACCESS etc)?

@RCVideoReviews 3 жыл бұрын

Alan, Sorry I can't be of help on that one. I kind of stopped following FrSky after the switch to ACCESS. I'm sure the radio mainboard supports it. I don't really know what happens with regard to the transmitter itself as ACCESS is an encrypted (proprietary) protocol. All I can say is try to flash it and see if it works. If it doesn't, you *should* be able to flash back, but I have no way of knowing for sure.

@alantoseland6629 3 жыл бұрын

@@RCVideoReviews okay John,thank again and keep up the good work

@alantoseland6629 3 жыл бұрын

@@RCVideoReviews I've had a bit of a fiddle and loads ok,will spend more time with it later

@fadliannita1501 2 жыл бұрын

hello sir why i cant install my edgetx?? when i open the edgetx.exe, there is menu selection number 2 "install edgetx" when i hit the button i need to select firmware version its say "no data available" so i cant write my make my tx18.bin file, can u help m sir?? but if u dont mind u can make me one of .bin file, i use jumper t18 pro v2 remote, and send to my email...thank n sorry for all i ask...

@gfurey9163 Жыл бұрын

Do you have any videos on how to add the sounds?

@RCVideoReviews Жыл бұрын

How-To Convert from OpenTX to EdgeTX MASTER CLASS • 100% Works kzfaq.info/get/bejne/Zr2eo8l2nJ6Re4k.html

@gcekeonjhar282 2 жыл бұрын

Hi sir, Can I use my Models from OpenTx on to EdgeTx? I have 20models and wants to take it in to EdgeTx if I convert from OpenTx! Please tell...

@RCVideoReviews 2 жыл бұрын

You can convert your models and your model settings will transfer. However, you will lose your widgets and any additional per model pages you have. There is no workaround for this at the moment.

@manski209 2 жыл бұрын

When i look in my sd card content on my pc, it doesn't have a "RADIO" file in it. What do i have to do to create a "RADIO" file on my sd card so i can transfer to EdgeTX?

@RCVideoReviews 2 жыл бұрын

RADIO isn't a file, it's a folder. Inside the RADIO folder is a file called radio.bin That file contains all of your settings; however, recent releases of EdgeTX have converted that file to radio.yml which is the new yaml format.

@hutch08 2 жыл бұрын

When I flash the EdgeTX boot loader to the QX7 Radio (as shown in your video), then turn off the radio and try and turn on in Bootloader mode the radio only turns on in normal mode. Any ideas why the boot loader won't come up when using the Edge Tx Bootloader firmware?

@RCVideoReviews 2 жыл бұрын

I don't know. I don't own a QX7 so I have no way to test. You should probably check-in with the EdgeTX team on this question.

@nq1980 2 жыл бұрын

Hi there, does edgetx have more protocols in the internal module,or updates.? Please end thanks.?

@RCVideoReviews 2 жыл бұрын

No. MPM protocol support is governed by MPM firmware, not the radio firmware.

@nq1980 2 жыл бұрын

@@RCVideoReviewsthank you, I was wondering, because I'm having issues binding eachine airplanes with my opentx16s, in order to make the servos to respond I have to bind on low power. I have the firmware 0pentx 2.3.14 installed in my radiomaster. Any idea what is going on.? Please and thanks. My friends want to get this radios, but they are not sure if they will have the same problem.

@dragonclips 2 жыл бұрын

Hi , i tried flashing ETx using the SD method but i got " wrongPCBDetected " error on my X10s , whats wrong?

@RCVideoReviews 2 жыл бұрын

Sorry, I don't use FrSky radios so I can't help.

@alexherrera3918 6 ай бұрын

how to enter bootloader mode on a boxer ? same way? i did flash it using radio settings menu it seems to run but the radio keep factory version . hope you can help.tks

@RCVideoReviews 6 ай бұрын

Discord

@alexherrera3918 6 ай бұрын

@@RCVideoReviews solved, i had to get into bootloader mode with two trims. many thanks

@michaelrostrata7456 Жыл бұрын

Hi! Can this method work with Radiomaster TX12 Edge TX also?

@RCVideoReviews Жыл бұрын

Same process.

@michaelrostrata7456 Жыл бұрын

Thank you!

@creeek3 2 жыл бұрын

Weird, I tried the flash EdgeTX boot loader, the RED line got to about 2 percent and totally locked, I waited about 5 minutes, still the same. I have to disconnect the battery. I tried again and it worked great!! I feel a bit lucky I didn't damage the firmware. I actually have 2 TX16s radios and thought "perfect" upgrade one! its looking great. Currently using V2.6.0 (14/2/22)

@RCVideoReviews 2 жыл бұрын

Good deal.

@frantzs1077 Жыл бұрын

Hmnnn... something went wrong with my flashing to EdgeTX. I tried to flash EdgeTX 2.9 to Jumper T-Lite v2. Now it is unresponsive. Any chance to revive it?

@RCVideoReviews Жыл бұрын

First try to get into bootloader. If you can do that, you can reflash. If not, watch this: kzfaq.info/get/bejne/fp-PptuJvsWvXWw.html

@stefankellenberger8315 2 жыл бұрын

Can i run the r9m with Expresslrs on Edge tx?

@RCVideoReviews 2 жыл бұрын

I think so, but I don't use Frsky stuff, so not sure.

@zmanphx 2 жыл бұрын

I have Jumper T18. I flashed the firmware with the Edge TX boot loader. It loads Edge TX. I copied over my models and radio settings to my SD card. My touch screen doesn't work. Is there a hardware setting in Edge TX to enable touch screen?

@RCVideoReviews 2 жыл бұрын

Jumper T18 isn’t touch. The conversion process should begin automatically. You’re the second person to mention this. I would suggest reporting the lack of conversation issue on the EdgeTX Github here: github.com/EdgeTX/edgetx/issues

@zmanphx 2 жыл бұрын

@@RCVideoReviews I formatted my SD card and copied over the firmware and sound files, models, radio setting. Reflashed the firmware and now it prompts to convert. So I am good. I just need to order a touch screen for the Jumper T18

@fly2me2day Жыл бұрын

Viewing the update to E Tx, I have managed to update my Tx16S. Viewed all your videos on same and managed it by a "hybrid" method.... As you say bootloader is the key! Can you make video for Horus x12s update. Please!

@RCVideoReviews Жыл бұрын

Sorry, I don't have FrSky gear.

@briancrick935 3 жыл бұрын

Does changing the firmware interfere with any other settings? Such as how models are set up?

@RCVideoReviews 3 жыл бұрын

I don't believe model settings are changed, but you will lose widget settings. I would strongly advise before doing anything that you backup your original SD card or better yet, start with a discreet SD card.

@briancrick935 3 жыл бұрын

@@RCVideoReviews Think I'll start with a different sd card

@christopherreyes5245 Жыл бұрын

Hi, is this work on radiomaster tx16s se thanks in advance

@RCVideoReviews Жыл бұрын

Yes.

@doublediamondrailroad5949 2 ай бұрын

I definitely now need 4 in 1 module Firmware for my new Boxer. Its got July 2023 version. Got warning Status in Model. C186 is Invalid Protocol. Proved Boxer IS Working. Bound it to a DSM Receiver no problem. So it needs the Internal Module Updated to Recognize the E129/C186. That’s got to be the Issue. Looking for source of Internal Module Firmware. Use Companion??

@RCVideoReviews 2 ай бұрын

You can get module firmware here: downloads.multi-module.org

@doublediamondrailroad5949 2 ай бұрын

@@RCVideoReviews Ok I got it down v1.3.4.0 and Flashed in Radio. Serial AETR Latest Stable for STM? Tried ppm and got a Down Warning For Testing Only. It Tried to Bind. Fast Flashing Heli lights, but bind Times out and no Bind. Snd Yet it partially works. Sticks cause much Delayed correct movements. Like a Slow Robot. I don’t get it. Why My new radio? I’ve been programming Spectrum radios for 15 years. This is only different on the First Radio Settings page by using the Internal 4in1 to Select and Bind. Don’t know what else to do. This is Day 3 on this one Protocol. Important to me because the Stock Radios are terrible Controllers!