FINALLY... a good video. every other video cut out too many parts in between which was the stuff I needed!!! thank you very much for this video
@RanchoNomada8 жыл бұрын
Thanks for the video. I just replaced my speakers today but I used the factory frame to hold the speaker and soldered the old cables to my new speaker in order to keep original connector. All I had to do was cut the wires going to the speaker and then hitting the old speaker with mallet on the magnet. Now it sounds better but looks stock.
@marcusee1234nation7 жыл бұрын
Alfredo Cervantes this afternoon I did same thing. smooth install.
@northsideirish743 жыл бұрын
I did the same thing. Took out one frame only to find out the remaining hole was too large for my speakers (Cerwin Vega), so I cut out the old speaker and screwed the new one into the frame with self tapping screws. For the second one I left the frame in, cutting out the speaker in place.
@bdambrowski4 жыл бұрын
I dont normally comment, but great video. Watched it one time and knocked out the install (head unit, two front door speakers) in about 2.5 hours. Thanks!!
@EdwardInTX4 жыл бұрын
Super cool. Thanks!
@bdambrowski4 жыл бұрын
@@EdwardInTX one recommendation...use the Metta speaker connectors for this job. hooked right into the factory bracket without having to tap the wires.
@jesusparra86759 жыл бұрын
What an excellent demonstration! Thank you so much followed everything step by step and got it done.
@DBTechYT6 жыл бұрын
Great video! Getting ready to do this in my new car soon!
@Visionist10 жыл бұрын
Great uncut video. Best way to learn! Maybe next time you can add the tools & such in the description, it'd help some!
@jtoddbrown7 жыл бұрын
Very helpful video; thanks very much for taking the time to make and post this.
@jamalcole31999 жыл бұрын
like your video it help out a lot I have the same make and model I'm Goin to replace my factor speakers, head lights, and tail lights this weekend hope it Goin smoothly
@janovewaldner110 жыл бұрын
Thanks man, now I'm ready to disassemble mine.
@circuitdiploma200010 жыл бұрын
Great Video thanks for the guidance.
@TheGravestring8 жыл бұрын
thank for your work and time man
@that1guy02194 жыл бұрын
I ripped out the old cone and coil and cut away the plastic and just set the new speaker in..I didn't have an adapter plate and it works
@EdwardInTX4 жыл бұрын
Good to know. Thanks for sharing!
@luisaldana65033 жыл бұрын
Thanks to showing 👍
@alm77ar10 жыл бұрын
how did you know negative and + of the car cables
@andresjc5024 жыл бұрын
That’s my question I stalled mines today but now I’m thinking if I did it right, I’m not sure 🤔
@kadithcollins22764 жыл бұрын
@@andresjc502 the speaker will work fine even if the cables arent the right way around . You can usually hear a sound quality difference if you swap the cables around. Whichever orientation has more bass and is clearer is the right way round
@andresjc5024 жыл бұрын
Kadith Collins Thanks I have figured it out but thanks
@NFS4LFE4 жыл бұрын
Handy for my car too I imagine.
@EdwardInTX4 жыл бұрын
Correct. You can do it!
@MrYeah889 жыл бұрын
Very useful video. Are you running these speakers of 60W rms (as i noticed) w/o an amplifier? thanks.
@EdwardInTX9 жыл бұрын
My head unit does 52W x 4. Definitely not hitting fully 60W without the amp but it sounds good enough. Maybe they'll sound even better with an amp.
@elchicotony76375 жыл бұрын
U means real watts or peak watts???
@hickstylez5 жыл бұрын
he means peak 52w
@1012marley3 жыл бұрын
Does it matter which wires you splice together?
@davidknibbs96462 жыл бұрын
Nice job, what model are those speakers a where did you buy them from
@mariemarie16893 жыл бұрын
Sir, did you install or attach the clear plastic that's holding the wires on this door? If so what did you use, because it's nice, it looks neat
@jace_Henderson3 жыл бұрын
What if I need a higher gauge and can’t use the stock speaker wire on the harness? Then what would the next cleanest method be? My speakers are gonna be 90 watts sustained at most.
@lordbobrules3 жыл бұрын
why did you use vice grips to crimp the wires when you just had wire crimper/splicers in your hands?
@Kalium9518 жыл бұрын
It looks like you don't have any tweeters installed from the beginning. Is that usual? I just had a look at my car (2005 Corolla E12) and I have tweeters installed. As far as I know, no previous owners have done any modifications. Planning to buy a DLS RMC6.2 kit and also replace the head unit. Anyways, thanks a lot for the guide on how to remove the panels. I really appreciate it!
@EdwardInTX8 жыл бұрын
That may be an option, mine is a basic model.
@ormalibu20568 жыл бұрын
thank good video that help me a lot
@KaratefanInc8 жыл бұрын
Thank you.
@andresjc5024 жыл бұрын
I don't know which wire is positive and which wire is negative. One is /pink and the other is a purple which is the positive wire ?
@nfasousa2 жыл бұрын
Can you please tell me the color of positive wire? is the blue or pink?
@matildab83558 жыл бұрын
thank you!
@andresjc5024 жыл бұрын
What’s those blue connectors called ? Anyone ?
@kevinmontoya73183 жыл бұрын
Spade connectors
@kommoncents00009 жыл бұрын
Which wire (pink or blue) is positive and which is negative?
@EdwardInTX9 жыл бұрын
follow the wires from the plug to the speaker, the speaker leads are marked for polarity.
@kommoncents00009 жыл бұрын
Thank You Great video!
@TheRealWillGeronimo7 жыл бұрын
Awesome tutorial. What size drill bit, I'll be doing the same thing this week
@EdwardInTX7 жыл бұрын
Start with a 1/4"
@saintbeats14355 жыл бұрын
Remove for handle and window levers. ✔️ Remove two screws. ✔️ Remove door panel. ✔️ Drill out rivets 😳😳😳😳 Just leave it the way it is. ✔️
@octoberboiy2 жыл бұрын
Drilling was easy, it’s the wiring that’s hard.
@blackwolfalch7 жыл бұрын
couldn't you just cut strip the negative and positive wire connected to the door and connect it with the new speakers wires?
@11122233331117 жыл бұрын
hey you could still roll the window? my yaris must have trouble were these the s slim version?
@quaide7810 жыл бұрын
Great video! So did you not install a new tweeter where the factory one was?
@EdwardInTX10 жыл бұрын
Thanks! No, we didn't install a tweeter but it can be done.
@sayhimali63848 жыл бұрын
what are the blue clips called you used to connect the two new wires
@johndoe-lk3ps8 жыл бұрын
can you tell me excatly where you got all your stuff for the speakers from
@metalor6963 жыл бұрын
'Please' would be nice 🙂
@johndoe-lk3ps3 жыл бұрын
@@metalor696 don’t have this car no more so fudge a please
@yengilee288 жыл бұрын
just wondering, where did you buy those blue wire connector?
@EdwardInTX8 жыл бұрын
+yengilee28 Walmart
@xRenebladeZx9 жыл бұрын
You said you didn't replace the tweeters, which is fine. But can you tell me which after market tweeters I can buy to swap? I know the size is 1.25 inch but should I just get a 1 inch or 1.5.
@EdwardInTX9 жыл бұрын
It looks like you can get a 1 inch. Unfortunately, I'm not sure which tweeters you should buy to swap. Check this out: www.toyotanation.com/forum/326-10th-gen-corolla-2nd-gen-matrix-interior-audio-forum/358558-door-tweeter-install-09-corolla-le-6-speaker-option.html
@guest20074 жыл бұрын
17 nov 2019 1:20 pm est: 3:27, 5:47 drilling is needed
@garysmart110 жыл бұрын
ayos pare
@circuitdiploma200010 жыл бұрын
what kind of connecter (model name) you have in 11:32 -34.
@EdwardInTX10 жыл бұрын
Came in different colors (for different sizes), I used the blue one, follow this link: www.walmart.com/ip/Gardner-Bender-Tap-Splices/22634650
@DNLYUSEmeBIADE8 жыл бұрын
I've got manual windows... How in the hell do i remove my door panel
@jbmonke8 жыл бұрын
look up how to remove manual window crank
@karengardiner43667 жыл бұрын
DNLYUSEmeBIADE I need to do mine two
@TheGnomieHomie7 жыл бұрын
there is a horseshoe clip on the backside by the door
@bblythe19885 жыл бұрын
I'm only a few years to late but I use under wear band lol
@McMilllllian8 жыл бұрын
I just blew a speaker in my 04 and the other one is on its way out. Do you know exactly what kind of speaker you used to replace yours? What wattage were they?
@EdwardInTX8 жыл бұрын
Polk DB651, 120 Watts per pair
@cheapspace9 жыл бұрын
my door has a tweeter in that little black panel installed last whats the size of it will i have to drill holes for it too if replaced?
@EdwardInTX9 жыл бұрын
1 inch diameter, and 1/2 inch depth for the standard tweeter. Usually, I've seen people buy the Corolla tweeter cover on eBay. Check out these links: www.toyotanation.com/forum/326-10th-gen-corolla-2nd-gen-matrix-interior-audio-forum/358558-door-tweeter-install-09-corolla-le-6-speaker-option.html Post #10 here: www.toyotanation.com/forum/132-9th-gen-corolla-1st-gen-matrix-2003-2008/414777-tweeters-corolla-s.html
@Thadeues_Aukai4 жыл бұрын
Pink wire is positive ?
@zeldonzz39615 жыл бұрын
Is it make any difference?
@sorenduran33088 жыл бұрын
what are those things called that you are putting behind the speaker to screw into? (around 7 minutes) thanks.
@EdwardInTX8 жыл бұрын
+Soren Duran Search Amazon for "Corolla Speaker Mount"
@juanmiguel4317 жыл бұрын
What about the tweeters near to the mirrors? Are they need or is it sufficient the speakers that has integrated tweeters ?
@EdwardInTX7 жыл бұрын
Not needed, but they would make the sound a bit more "full"
@icio90019 жыл бұрын
Hi Edward, do you know if I can replace my rear spearkers from 6ohm to 4ohm on a Corolla?, thanks for your inputs and nice video! :D
@EdwardInTX9 жыл бұрын
Mauricio Gloria Sorry, I don't know.
@jonathanschultz24728 жыл бұрын
Should be fine
@DJSHOWOFF794 жыл бұрын
Self tapping screws would of work better
@babalooman8810 жыл бұрын
Very helpful. What's the name of the connectors at 8:30
why drill down rivets. Why not cut out the factory speakers and then install using the factory mounts. saves time and makes for cleaner install.
@nowisrelative6 жыл бұрын
That would be way messier. Separating the "mount" from the "speaker" would be much harder than drilling the rivets. You'd have to dremel through the plastic the whole circumference.
@davidy2957 жыл бұрын
Been trying to find a pair of sail panels for my 2005 Corolla door so I could mount a tweeter. Would anyone know where these are sold besides the dealership?
@Inconsequential-consequences5 жыл бұрын
Local junk yard
@TheShivmalik8710 жыл бұрын
Where did you get that adaptor? And don't you have to make sure about the depth?
@EdwardInTX10 жыл бұрын
The adaptor came with the speakers.
@TheShivmalik8710 жыл бұрын
Is there a brand name of the adapter? Or a specific kind? I'm having a hard time finding a one that fits locally
@EdwardInTX10 жыл бұрын
you may want to check this out www.amazon.com/Aftermarket-6-5-Inch-Plastic-Speaker-Adapter/dp/B007ZQGZWO/ref=sr_1_4?s=electronics&ie=UTF8&qid=1395189519&sr=1-4&keywords=front+door+speaker+adapter
@Josefrom9542 жыл бұрын
What size was the speakers for the front ?
@EdwardInTX2 жыл бұрын
6.5
@Josefrom9542 жыл бұрын
@@EdwardInTX I have a 2009 would it still fit ?
@EdwardInTX2 жыл бұрын
@@Josefrom954 it should
@Josefrom9542 жыл бұрын
@@EdwardInTX thanks 💯
@GhostGR284 жыл бұрын
What size is the original speaker's?
@EdwardInTX4 жыл бұрын
6.5 front doors. 6x9 next to rear glass area
@lachyando49115 жыл бұрын
what size speaker is in a 2005 corolla?
@cameronlovesevolve5 жыл бұрын
the question is answered in the video
@jasnic21319 жыл бұрын
I think you should have taken the original wire from speaker and soldered it onto new speaker keeping the factory connector instead of using that crappy splice connector.
@makeminea99599 жыл бұрын
Jason Gib It's one option but then soldering is an art and it's very easy to do a bad solder joint and end up with a glitchy connection.
@coyote24275 жыл бұрын
What size is the speaker
@EdwardInTX5 жыл бұрын
6.5
@jalenburmeister54128 жыл бұрын
Took the door off, can't put it back on
@cam46177 жыл бұрын
Jalen Burmeister damn, did you get it back on?
@Bigdassak7 жыл бұрын
no, he is driving without a door
@elchicotony76375 жыл бұрын
There is always a use for hammer ,drill and a bunch of screws lol
@that1guy02194 жыл бұрын
Thanks toyota.. just couldn't make it easy
@stevefm9 жыл бұрын
What's the point? How much better will the sound be now?
@EdwardInTX9 жыл бұрын
Can't give you a definite percentage on how much better, but it's noticeable with the right speakers. No more muddy bass and weak treble.
@stevefm9 жыл бұрын
***** Seems like worth doing then. I hate muddy bass.
@EdwardInTX9 жыл бұрын
Also quick note: replacing the head unit matters too--the OEM one doesn't go far in making the speakers sound better.
@stevefm9 жыл бұрын
***** I've been thinking of doing that in my 02. So to fill the space left by removing the stock unit you would need a spacer of some sort? It's a lot bigger than a CD Radio unit. And also you would lose the MPG/Average speed info which is displayed on the screen of the old unit?
@EdwardInTX9 жыл бұрын
Interesting to see you have the MPG/Avg speed built into your radio (just looked, USA Corollas don't have that). Yes, you would need the aftermarket radio bezel, which you can have single din with a little compartment opening on top (like mine) or a double din that takes the whole space.
@DJ-wj6cs8 жыл бұрын
what size is the rear doors??
@EdwardInTX8 жыл бұрын
Front 6.5, none on rear doors, and the ones mounted near the rear window are 6x9
@DJ-wj6cs8 жыл бұрын
I have 5 door hatchback ,
@EdwardInTX8 жыл бұрын
Oh, unfortunately we do not have those here. Some things I would look at--If you shine a flashlight at the speaker grille in the door, does it appear circular or oval shape? You could probably measure that hole as well.
@chrischoy97 жыл бұрын
My Japanese RunX import doesn't have any speakers on the back door as well. Most people say the rear one are 6"
@goransvraka31718 жыл бұрын
what didnt u just unscrew the screws when replacing the speaker instead of drilling the screw
@phillbies8 жыл бұрын
+Goran Svraka they're riveted in not screwed. You have to drill the rivets out.
@gregnotoast82957 жыл бұрын
Do a 01 model please
@CrankDatPikachu937 жыл бұрын
GregNoToast Go buy him an 01 model then lol
@gregnotoast82957 жыл бұрын
What speaker size is the 01 model
@EdwardInTX7 жыл бұрын
6.5"
@gregnotoast82957 жыл бұрын
Do you have a 01 model ?
@EdwardInTX7 жыл бұрын
06.
@gregnotoast82957 жыл бұрын
Would you know what size a 01 Toyota Hilux has ?
@hunterkyle20217 жыл бұрын
crutchfield should be your best friend
@jonathanschultz24728 жыл бұрын
30 minutes each side?! Took me like maybe 10...
@EdwardInTX8 жыл бұрын
+J⃟O⃟N⃟A⃟T⃟H⃟A⃟N⃟ S⃟C⃟H⃟U⃟L⃟T⃟Z⃟ Yeah, unfortunately we're not professionals like you.
@jonathanschultz24728 жыл бұрын
+Edward Chua i was 16 and it was my first time... Guess I'm just a pro then...