No video
Electric Scooters Tube/Tyre Change (STEP by STEP)
Рет қаралды 161,509
Жыл бұрынChanging your electric scooter tube or tyre for the first time can be frustrating. I share some tips in this video to make things much easier.
Other helpful videos • Helpful videos for any...
⚡️ Watch my most popular videos after this • Popular Videos
-------------------
🔹 My tools, riding gear + upgrades movelectrics.c...
🔷 My FB group for anything electric: bit.ly/2NMeXIY
-------------------
Sound effects/Music Licence: www.epidemicso...
Get Epidemicsounds here: bit.ly/2WglTia
This video is original, made by myself and I go through a detailed process of shooting and producing original content. All opinions I share are my own.
DISCLAIMER: As an Amazon Associate I earn from qualifying purchases.
DISCLAIMER: This video and description might contain affiliate links, which means that if you click on one of the product links, I'll receive a small commission at no additional cost to you.
DISCLAIMER: Always consult your doctor/professional before using any products that are reviewed or mentioned on this channel.
DISCLAIMER: The creator of this channel will not be held responsible for any damages that could arise from acting upon the information that this video contains. The video is for information purposes only.
***My website: movelectrics.com
***Business email: contact@movelectrics.com
@Movelectrics Жыл бұрын
Click here for more helpful videos kzfaq.info/sun/PLOIER5h7JLythi9RYBUqYqEN9hljlkVb- Don’t forget to check the tyre rim and inside for the possible cause of the puncture 👍 This video if it has helped you and feel free to ask any questions. Ride safe 👊🏼
@MrMagicznyMAG 9 ай бұрын
Thank you! It's awesome I was struggling with this! I have 2 tips for you that you can apply : 1. Cut the old tube and put the new one inside. Thanks to this there will be less friction between tyre and new tube, 2. Put a lot of tlacum powder inside!
@Movelectrics 9 ай бұрын
These methods are ok but generally best thing to do is get a better quality tyre. After this video was made, I bought a higher quality one and didn’t have a puncture. The tyres though supplied in this model scooter are actually quite soft and poor quality. Anything is worth a try though if you are stuck! PMT tyres I have t tried yet but meant to be the best there is.
@adolphsmith1353 Ай бұрын
I'm 68. You make it look easy. I was afraid of damaging the rim or tire and had to take a break. Thanks for your video, it made it so simple. I'm missing those wedge duhickies to keep the tire out! Thanks!😂
@Movelectrics Ай бұрын
@@adolphsmith1353 trust me, I sweat many times
@thompaulson5152 10 күн бұрын
Thanks so so so much for making this video I was mad on Monday happy by Thursday thanks again
@Movelectrics 10 күн бұрын
@@thompaulson5152 no worries and thank you for the support.
@Blaster__ 10 ай бұрын
It's so hard to put tire on rim 🤯
@Movelectrics 10 ай бұрын
New tyre replacement is of course more tough. But overtime, you get faster.
@MarstaJNZ 5 ай бұрын
Yup. After blood, sweat & tears, I ended up scratching the sh!t out of the rim & ruined the tire. So bought a new whole wheel from Aliexpress 🤣
@DARK_AMBIGUOUS 5 ай бұрын
I bought a new tire for my scooter and it's like slightly to small to fit, I don't know if it's supposed to be like that and your supposed to force it on but it looks significantly smaller so I don't know. The listing on AliExpress says that it fits my scooter
@Blaster__ 5 ай бұрын
@@DARK_AMBIGUOUS press on the inverse side of the tire when you put on, il fit but it can be hard to put
@Blaster__ 2 ай бұрын
@@amped19996 WTF
@Broughtvulture Жыл бұрын
Due I just went through 2 tubes, cause I popped all of them. Thanks for this video, I had a third tube and got it in.... I didn't know we had to inflate tube and put it into the tire before fitting it onto the wheel. Thanks you for this.
@Movelectrics Жыл бұрын
No worries at all! What scooter you have?
@Zaloomination Жыл бұрын
Thanks for this video. Tryina take shortcuts like not taking the tire off the rim just makes it more frustratin!
@Movelectrics Жыл бұрын
Tried that myself in the past also. Best to remove. Thanks for the support 👊🏼
@mutatedAi Жыл бұрын
Better then silicone spray is to use your hand dish soap with a little water mixed in 🙂
@Movelectrics Жыл бұрын
Never tried it but thanks for sharing. Can help others that don’t have a spray to hand for sure.
@gunslayer5964 8 ай бұрын
Won't water And soap, rust the inside???
@TrenchbabyMel203 Ай бұрын
@@mutatedAi Hand or dish soap?
@Tefelucky Жыл бұрын
Thanks a lot....what a miracle did that silicon spray....wow
@Movelectrics Жыл бұрын
Good to hear ⚡️
@paulcostello6329 11 ай бұрын
very well explained thank you bud !
@Movelectrics 11 ай бұрын
No worries Paul ⚡️
@alhajicktv 8 ай бұрын
Nice sharing😊
@MolecularHeckler 9 ай бұрын
what a pain in the arse this tire tube has been for me. you make it look so easy.
@Movelectrics 9 ай бұрын
This was actually my 4th/5th time changing this tyre so it was a bit soft. But for a new tyre, that’s even more fun.
@bigearedmouse17 Жыл бұрын
Thank You for this upload, Please. What is your opinion on the Solid tyre available for the m4 pro as I am getting a back flat almost Every couple of months ? Also i is there a tyre you would recommend ? Thank you.
@Movelectrics Жыл бұрын
Watch my full review on this as I explain everything kzfaq.info/get/bejne/kJZlpLigzZO3m5c.html&si=EnSIkaIECMiOmarE
@ago6857 Жыл бұрын
Hello when you receives this do the tires come prefilled or do you have to add it yourself and if so what is the correct tire pressure? For the bogist c1 pro
@Movelectrics Жыл бұрын
You put air in yourself. Best pressure is 45psi.
@Yungboy18s 4 күн бұрын
What tools do you use to change the inner tube ?
@Movelectrics 4 күн бұрын
@@Yungboy18s my tools movelectrics.com/pev-tools-upgrades/
@Royybabyy-cee 2 ай бұрын
Hello bro .. i got e-wheels E25 V2 .. what tyre do you recommend and what inches is it + can i use a heavy wheel like the one in the front ?😅
@Movelectrics 2 ай бұрын
Size should be on the side wall. Think they are 8.5inches. Search AliExpress and check out reviews from buyers. There are hundreds of tyres to choose from.
@ahmedhentati598 Жыл бұрын
Thank you! It wasn’t easy, but you saved me 🙏 My disk is making noise, and I can’t find the video you mentionned at 3:57 can you please give me link ?
@Movelectrics Жыл бұрын
No problem. Here is that video (applies to any mechanical disk brake) kzfaq.info/get/bejne/jrB3osiZ1tHZpas.html&si=EnSIkaIECMiOmarE
@lucifertempest9566 2 ай бұрын
Not sure if you are seeing this but i just got a urbanmax cq today and it was a little deflated so i went to an airpump near me to fill it. It said it was doing like 10 something? (Never dont any of this) it filled very fast so i had it on for less than a second. It looked and felt fine and solid but when i was riding it was wobbly in the front. Idk what happened but it looked like it either came loose/expanded a bit cause it was slightly off the rim ,not much but enough to make it wobble. You know if i popped it or not? Dont wanna have to get new tires/replace it yet since i just got
@Movelectrics 2 ай бұрын
Never use garage pumps. Buy the Xiaomi pump that battery operated. Deflate, make sure it seated properly and pump again. Sometimes there is a slightly wobble but in general is fine while riding. But if it’s very bad, a tyre change is needed.
@rubytorreno8524 Жыл бұрын
Can you replace it with any other scooter model’s tire
@Movelectrics Жыл бұрын
Needs to have the same dimensions. 10inch/3inch
@rubytorreno8524 Жыл бұрын
@@Movelectrics Aight thanks 👍
@sexyloser5254 Жыл бұрын
hey I was riding my scooter with too low PSI and the tire became unseated. What's the best way to reseat it or should I just replace the whole thing? Thanks.
@Movelectrics Жыл бұрын
If it ain’t damaged, pump it back up to the max psi (usually 45psi)
@ytnigina 19 күн бұрын
May I know what is the size of the interior tire
@Movelectrics 15 күн бұрын
2.75
@michaelangeloncube1775 9 ай бұрын
Thank you
@Movelectrics 9 ай бұрын
No worries ⚡️
@AstroThaJit 7 күн бұрын
How much air do u put in the tires?
@Movelectrics 7 күн бұрын
@@AstroThaJit 45psi
@Merky_Gz Жыл бұрын
THANKS A LOT MATE' I got the same back wheel (kugoo g2 pro) without outer rim and it look Sooo ennoying.. but u'll show me the exact way n I'm now good to go' 👌 Cheerz bro
@Movelectrics Жыл бұрын
No worries ⚡️
@harleyosborne4943 Жыл бұрын
How do you know which screws to take off for the wheel ?
@Movelectrics Жыл бұрын
What model you have? General it’s the side nuts and disk rotor.
@ZynthCode 2 ай бұрын
1:20 minute video. Me: 1-2 days with a lot of swearing
@Movelectrics 2 ай бұрын
First time for sure it’s a pain, but the more you do it, the more confident and faster you get.
@RayGmage Жыл бұрын
Where can i find those anti-air loss extensions? is something that's included in the xiaomi compressor or do i need to purchase it separately?
@Movelectrics Жыл бұрын
It’s sold separately. I got it from the place linked below. But they are also on AliExpress for cheaper bit.ly/2UNHa1M
@RayGmage Жыл бұрын
@@Movelectrics aight bro, much appreciated. Keep up the great content
@lauraprice8108 2 ай бұрын
How do I put the bolts back on
@Movelectrics 2 ай бұрын
Same way you took them off. Always take pictures before removing so you know what arrangement washers/spacers are depending on the model.
@ceasarnunez5652 4 ай бұрын
I’m so disappointed. I live in the desert where there’s a lot of thorns & the nearest scooter shop is over an hour away. I just took my scooter to get the flat tire fixed a month ago, and now I got another flat 😢. Will try to fix it myself this time
@Movelectrics 4 ай бұрын
Practice makes perfect. Take your time. Always good to learn a new skill.
@user-po9ei2oe9z 4 ай бұрын
Check tire inside for thorns before inserting a new tire tube. May be the reason for the new tube.❤😮
@Movelectrics 4 ай бұрын
Yes 100% rub your hand on the inner part.
@roytaylor5618 Жыл бұрын
It's such a pain doing off road escooter tires, I just sent it to my scooter dealer 🙃
@Movelectrics Жыл бұрын
If you get it done cheap then happy days. But it’s always good to try and learn a few skills.
@lakayGaming19 10 ай бұрын
Can i ask u sir..no need to disconnect the wire in the battery while changing the tire? Im confusing
@Movelectrics 10 ай бұрын
No need to disconnect. Just be careful. If you want to disconnect it, it’s much more time consuming.
@DMV_banger Жыл бұрын
Where did you get the tube from
@Movelectrics Жыл бұрын
AliExpress ⚡️
@mikeygill5737 Жыл бұрын
Hi I'm just wondering which electronic pump it is you use, as I've bought a few but they all last around 2/3 charges thanks
@Movelectrics Жыл бұрын
Xiaomi portable pump. Have it years and has never let me down movelectrics.com/pev-tools-upgrades/
@mikeygill5737 Жыл бұрын
Thank you
@Nutrient16 Жыл бұрын
What is the name of the silicon spray that you're using? Great video!
@Movelectrics Жыл бұрын
I forget the name, but any silicone spray will do.
@declangibo2465 Жыл бұрын
man i wish you could fix my flat wheel Kugoo M4. I'm way to worry about doing it.. do you know any shows that are around the Dublin 22. also how much would a shop want for fixing it. not sure if its a flat or slow flat
@Movelectrics Жыл бұрын
Contact eScoot.ie and tell them I recommended you 👍
@photogonemad1 Жыл бұрын
Class
@soufianelachhab9137 Жыл бұрын
Are there solid tires? In scooter ienyrid m4 pro s+ or not please
@Movelectrics Жыл бұрын
You can get but would highly advise against. Can gradually loosen components and cause issues down the road.
@missreid86 Жыл бұрын
I take it you don't have to open up the side indicator to get to the motor cable for some slack on the cable?
@Movelectrics Жыл бұрын
No need ⚡️
@missreid86 Жыл бұрын
Thanks so much for this video all i have to do now is the breaks then I'm all set again :D thanks so so much
@quanghung3417 Ай бұрын
Hi, my scooter have problem, can you help me fix it!
@mattsfax 10 ай бұрын
Does it work resealing wobbly tire..?
@Movelectrics 10 ай бұрын
Your tyre is off balance? Could be the tube or the tire is not seated properly. Deflate completely and put some dish soap around the rim, inflate then to about 55-60psi then deflate to 45psi. Get a professional to do this if you ain’t sure. If the tire is still wobbly, a new tire is a good option.
@AceadamUK Жыл бұрын
is there any tubeless tyres you can get with the bogist and use that liquid stuff inside the tyre to seal it from punctures? or is the c1 pro tyres good enough not to worry about them thanks
@Movelectrics Жыл бұрын
Not sure about tubeless on the C1 Pro. Main thing is to maintain the pressure. Funny thing was, I never got a puncture on the C1 Pro compared to the Kugoo! I also just bought some sealant to test out. But since this video I have upgraded the rear tyre and have not had a puncture. Check out the community tab to see which one I’m using.
@AceadamUK Жыл бұрын
@@Movelectrics oks thanks for the reply , i should be getting my c1 next week . they state that the tyres are "stab proof" so maybe that's why you don't see many punctures on them?
@Movelectrics Жыл бұрын
They have air in them so it’s very possible to get a puncture. I would suggest keeping the pressure around 45psi.
@rickycranham5780 7 ай бұрын
got a link for that pump?
@Movelectrics 7 ай бұрын
movelectrics.com/pev-tools-upgrades/
@grose4936 5 ай бұрын
Did you use lub?
@Movelectrics 5 ай бұрын
Silicone spray. Small bit. Or dish soap.
@DeanyPlayz 11 ай бұрын
Why can’t you use screw drivers is it because damaging the tire is bad my uncles did it for my scooter and got it on but it looks like the tire is bent a little
@Movelectrics 11 ай бұрын
Leavers are slightly angled and wider. It’s a small investment that pays off.
@kings7man 6 ай бұрын
Could someone explain to me why scooters don’t have a plug on the wire between the battery and the motor so that the wheel and motor can be completely removed from the scooter and worked on on a bench for instance so you are not crouching which is most uncomfortable. this could also enable having a second wheel motor which you could swap while fixing the other .
@Movelectrics 6 ай бұрын
Some scooters have this like the Nami range and latest Inmotion RS (quick release connectors) You can of course if you really wanted, open the deck and disconnect the motor, but that is time consuming.
@kings7man 6 ай бұрын
Yes the Immotion RS a $6000 scooter which is not real legal here in my state of Victoria
@Movelectrics 6 ай бұрын
@@kings7man budget scooters just don’t have this option.
@shanemontgomery4692 8 ай бұрын
I actually damage my back tube stem from a certain stem cap do you know a way to possibly fix the stem or am I just gonna need to go ahead and change the tube
@Movelectrics 8 ай бұрын
Easiest thing is to replace the tube. You could have damaged the stem core, you can replace them quite easily. They screw out. You need a core removal tool.
@shanemontgomery4692 8 ай бұрын
I ended up replacing the tube by watching your video. The one part I messed up on is the washers on the inside of both rear swing arms on the Eagle one do you know how many washers go on the right swing arm? I have one main washer on the left and two on the right but I have one thinner washer that I can’t remember which side it went on.
@Movelectrics 8 ай бұрын
@@shanemontgomery4692 one washer on the left and 3 on the right side (brake disc side is where the smaller washer is and goes in between the 2 bigger washers) from what I remember. I made a video changing the tyre on my E1 👉🏻 kzfaq.info/get/bejne/bM2Xa6x_lZzVl5c.htmlsi=GyZE8PHoU7eIxQ7V
@shanemontgomery4692 8 ай бұрын
Thank you so now I have the washers correct and the brake disc is rubbing hard on the left side of the brake pad. Am I gonna have to adjust the brakes?
@Movelectrics 8 ай бұрын
@@shanemontgomery4692 generally you will always have to adjust it after completely taking it off. Easiest thing to do is loosing a small bit the screws holding the caliper on. Squeeze leaver and then re-tighten at the same time. Might have to go back and forth till happy.
@zuheir5354 Жыл бұрын
which type of valve do i need to inflate my scooter tire
@Movelectrics Жыл бұрын
Standard. Just like a car. Watch this video kzfaq.info/get/bejne/a9JgqJqptJ6ve4U.html
@Aaron-lr1di Жыл бұрын
Hi mate, does this tyre change apply to the M5 Bogist?(this is the one my mother has lol)
@Movelectrics Жыл бұрын
She has the scooter that has the seat and basket? Bigger wheels on that so it should be easier. Same method mostly for removing and fitting. Just take pictures of the washer/spacer arrangement.
@Aaron-lr1di Жыл бұрын
@@Movelectrics Yeah that’s the exact one. The one you thought was ugly 🤣Anyway, I tried clicking on the link you provided for the tyre irons you suggested on Amazon and it’s saying it’s currently unavailable. Would you suggest any other alternatives?
@Movelectrics Жыл бұрын
@@Aaron-lr1di any tyre leavers will do. Try a local bike store.
@user-ux5er6zz6e 9 ай бұрын
What size wrench
@Movelectrics 9 ай бұрын
Depends on your model of scooter.
@numinumful3815 7 ай бұрын
hello i have new g2 pro. i filled both tires 35 psi and within 2 days the pressure on both went down to 25 psi. im 95kg . is that normal?
@Movelectrics 7 ай бұрын
35psi is too low. 45psi is correct. If you have cold weather right now, that can effect the pressure. Are you using a anti-air loss device? Check out this video kzfaq.info/get/bejne/a9JgqJqptJ6ve4U.htmlsi=KaPMkqckcIi6roaI
@numinumful3815 7 ай бұрын
@@Movelectrics about the pressure. i will try 45psi. about that device, yes i just purchased air inflator device, i will also purchace that anti air loss device. BUT, as i understand that device is only meant while inflating the tire at the end, so air will not run out. but last time i filled the 35 psi at a gas station and i didnt feel any to very little coming out at the end, and still after 2 days both tires lost 9 psi
@Movelectrics 7 ай бұрын
@@numinumful3815 check the valve cores are tight. Anti-air loss is brilliant and you lose little to nothing when unscrewing it. You would be surprised the amount of air you would lose from 1 second. Pressure from gas stations is very high compared to a handheld pump so would not advise it.
@numinumful3815 7 ай бұрын
@@Movelectricsi suspect something is wrong with the vavles. i will be soon at a electric scooter expert, he will either fix it or replace the tubes
@Movelectrics 7 ай бұрын
@@numinumful3815 the odds that both valve cores are loose is slim. You pumped the wheels at a gas station which is not suitable like a mentioned. All you need is the pump and anti-air loss extension i mentioned and you are good to go. No need to spend more money and bringing it to a shop. The reason why you need these 2 tools is because you’ll need to check your pressure at least once a week.
@david69funk 4 ай бұрын
Is anyone familiar with the ix5 scooter by iscooter. I had the front wheel replaced now the handle bars won't click foreward into place. Must be something he did during the change. Can't think what it won't go foreward enough to lock in like somethings Stopping it
@philclfc77 7 ай бұрын
Doesn’t ever go on tha easy bro
@Movelectrics 7 ай бұрын
Keep in mind this is the 5th time from what I remember changing this tyre. You get faster the more you do them. Strength and your weight plus your knee. Split-rim designs all the way. Much faster.
@trulgn 11 ай бұрын
How to dettach cable from tyre?
@Movelectrics 11 ай бұрын
Not possible on the rear unless you open up underneath and remove from the battery and controller. There is no need to disconnect anything as shown. Just take your time.
@JRemyScoots 10 ай бұрын
I have that air pump and I don't think it needs an extension ..its the only airpump I've ever used that I don't lose air with when disconnecting
@Movelectrics 10 ай бұрын
You lose a small bit of air without the anti air loss extender. I’ve it for years and for tight spaces it is brilliant. Well worth the few euro.
@TheRafcave 7 ай бұрын
@@Movelectrics Is there a link to the anti air on Amazon?
@Movelectrics 7 ай бұрын
@@TheRafcave just checked. Here they are amzn.eu/d/cb04YHR
@TheRafcave 7 ай бұрын
@@Movelectrics Thanks, but do these prevent air from escaping after fill?
@Movelectrics 7 ай бұрын
@@TheRafcave yes, they are brilliant.
@finnromy6304 9 ай бұрын
Tanks fr elpin' me replace me toyer on me scoota👍
@Movelectrics 9 ай бұрын
No worries at all ⚡️
@lauraprice8108 2 ай бұрын
The front tire
@Movelectrics 2 ай бұрын
Same method applies if not split rim
@stavros3733 Жыл бұрын
Hi do you know how to open yhe hub
@Movelectrics Жыл бұрын
You have a split rim? Watch the video linked below. This video applies to non split rims. kzfaq.info/get/bejne/bM2Xa6x_lZzVl5c.html
@gamer2k23 Жыл бұрын
I could not get the grip off
@Movelectrics Жыл бұрын
Grip?
@gamer2k23 Жыл бұрын
@@Movelectrics yh got inner tune out but grip still not full off
@Movelectrics Жыл бұрын
@@gamer2k23 do you mean tyre? Just need to apply more force.
@gamer2k23 Жыл бұрын
@@Movelectrics yh plus couldn't connected to the motor off
@JHONY77- Жыл бұрын
I did and know is not work pliz help😢
@Movelectrics Жыл бұрын
What do you mean? Please share a video on my FB group bit.ly/2NMeXIY
@JHONY77- Жыл бұрын
Thei show eror on bord and the wheel spins for 3 seconds and stops
@bslothed3211 Жыл бұрын
1:02 IT IS NOT THAT EASY LMFAO
@Movelectrics Жыл бұрын
The more you change, the faster you get. Small bit of silicone can help like I mentioned and a bit of strength. Ride safe 👊🏼
@jonnyjoanknecht5164 10 ай бұрын
Stick the hubs in the freezer and the tyres on to boil, then it's piss easy, even solid tyres
@Movelectrics 10 ай бұрын
For the front wheel that’s fine but the rear you would have to disconnect the motor completely to do that.
@declangibo2465 Жыл бұрын
Anyone in dublin do house calls to fix flats
@Movelectrics Жыл бұрын
Yes Contact a good friend of mine. His website is eScoot.ie Tell him a recommended you.
@declangibo2465 Жыл бұрын
@@Movelectrics ty very much
@irenechang9515 10 ай бұрын
hi！ Thanks for your sharing! My problem is I can’t get the two biggest nuts out so that I can’t get the tyre out 😂 is there some suggestions for me?
@Movelectrics 10 ай бұрын
Use a higher quality ratchet or spanner. Also get a friend to stand on the scooter.
@irenechang9515 6 ай бұрын
@@MovelectricsThank you! I have got nuts out! 🎉 and now I am fighting with the tyre to get it off, It’s too hard. But by the way, I’d like to ask do you know if the rear tyre has an inner tube? Because my rear tyre is flat, and I wonder if I should change a new inner tube. thank you so much!
@Movelectrics 6 ай бұрын
@@irenechang9515 yes all inner tubes
MoovMoov
Рет қаралды 322 М.
KOMOTO Electric Scooters
Рет қаралды 1,8 М.
Pure Electric
Рет қаралды 803 М.
David Arthur - Just Ride Bikes
Рет қаралды 1,3 МЛН
MoovMoov
Рет қаралды 391 М.