yeah no ty

Baller

💀

> ways to laugh, be inspired, or be entertained I find enough of those on this channel.

hi

Hey what can I say! I don't meet people often! it's mostly me, the resistors and the capacitors. The capacitors are loud when they talk. AND IT IS MEHDI!

That was a given, he’s an engineer!

*_WAS_* a nerd with a power supply. Now he's just a nerd.

​@@ElectroBOOM you forgot FULL BRIDGE RECTIFIER

Mehdi's one of us! 🙃

😂

It was also right next to the tesla coil. Tesla coils can do some weird stuff.

This reminded me of a strange parts episode where he was having issues with a power supply arc’ing to itself due to altitude. Wonder if that was any factor also?

Power supply designer: it outputs 30 volts, surely the secondary side would never get more than 100 volts away from the chassis. Mehdi: Lets' connect a 100+kV HV generator to the secondary and leave it floating...

Honestly, if there's no smoke... i'd be worried what else went wrong...

Could you do a colab with Electroboom?

No I did

he was barely hitting the gas 🤣🤣🤣🤣 if you want crazy driving come with me 🤣🤣🤣🤣🤣

Considering he lived in Vancouver, it shouldn't be a surprise I guess. I've seen what people there are like D:

Nah that’s just Canadian or Tennessee drivers for you

Prob not used to driving in texas sun. Some snow and ice and he will be all set!

It’s OK, it’s a rental car.

I'm persian and I still managed to misspell Mehdi's name Medhi 🤦‍♂

How did you comment so early?

@@TheSingingPocket Patron Supportes can see earlier

@@TheSingingPocket I support him on pattern to see his video early

I actually find it very uncomfortable to watch

He's down to earth? You mean...grounded?

Think Medhi would be scared if he came to me to see driving, or has he ever driven in Delhi.

His driving was aweful haha

@@shawnfurness Not bad at all, he had on a seat belt, kept on the road and more or less kept to the rules as well. Even stopped for other traffic as well.

at 10mph...🤣🤣🤣🤣🤣🤣🤣

@@daviddavidsonn3578 common driving speeds here in Vancouver 90% of this city is traffic LOL

How the hell have you seen this video two days before the release date?

@@joveaaron-real patreon

yea, that is electroboom, never think something is impossible.

@@guardiangusti9808 ok thakn you

I blew up mine too, ran 300A from a car battery through it, vaporized the tracks on the PCB inside. Luckily it was just a small area and I could bridge them, working fine again.

Ah yes.

Haha

yep, happens all the time to me

TOO REAL!!!

It's the "Huh? Strange, it worked yesterday..." syndrome. Happens to a lot of people. Programmers, engineers, mechanics. Anyone who dabbles with anything more advanced than navel lint really.

They never worked flawlessly when Mehdi testet them by himself. You obviously didn't watch any of his other videos.

Hey plasma guy

Who:s austin

I'm an Austin resident. I know where the AutoZone is in this video!

Shame wasn't slow mo lol

My favourite bit of that is, if you look closely, the bottom of the trampoline is still all colourful from the powder paint video they did recently. Either they cleaned the top and missed the bottom, or just flipped the thing upside down

Shame it wasn't an electric trampoline

@@notcthulhu2650 think that would literally kill him

Interesting that he was surprised that there was a trampoline, I thought he watched their channel, lol!

@jschIattLive 🅥 spammer

Dan gets shocked, not gavin

Even if it was grounded with a fully covered sheath the spark might still jump off the metal screwdriver's point towards Dan's hand. Considering the high voltage.

It's not a slowmo guys video unless Dan gets to be a lab rat

Clasic mehdi moment m8... Hes very different and funnier then people lol

This is life and reality of our lives. Unlike the things they show us in the fancy movies or series.

@Olivia Banks I'm ******* tired of all this spam.

@@IstasPumaNevada report the shit out of it

Like mehdi, slow mo guys have usually experience more than one setbacks in their recordings

That's why they usually edit it out.

no sharp objects thats why

@@JeskidoYT Also no bottles of fluid over 1.5 ounces or whatever.

Hoo BTW, Kuthle tumhi

He has a video on voltage, current and resistance

The one thing that helped me understand voltage is the analogy that voltage is like water pressure in a pipe. Not exactly true but it's good enough for beginners to understand.

for me, the definition of current is easy to grasp, it’s just a measure of the rate of charges flowing through a wire. more current = more charges moving through the wire in the same period of time (either faster movement or bigger wire that allows more current flow). this is why you need bigger wires as current increases, and you can see in mehdi’s videos when his wires burn it’s because they are too small for the current he’s pushing through them. voltage is tricky to grasp, the definition most people will tell you is “electric potential” but i like to think of it like this: charges want to move from higher potential (+ end of a battery for example) to lower potential (ground or earth for example) always. that’s why most circuits have a ground, that’s the “final destination” of the charges as they always want to flow to ground (0 volts). as voltage increases, the charges want to go to ground more and more. i think of voltage as how badly the charges want to move through the circuit and that current is just the result of the voltage across the circuit (limited by resistance, Ohm’s law relates this very simply). this is why when voltage is high enough, you get arcs through the air like you see in this video. the voltage is high enough to where the charges will jump through the highly resistive air to reach ground. if you took an open circuit and increased the voltage enough, the charges would use the air to close the circuit and move to ground. i’m just an EE undergrad but this has helped me conceptualize it a little better.

Dan is just happy whenever someone else is getting hurt instead of him 😂

You mean some people _don't_ want their setup to repeatedly catch on fire? Where's the fun in that? :D

Mehder is orangey-yellow lol

We need a collab with Styropyro and these 3. Imagine the CHAOS!!! Plus all the pain for Dan.

next : veritasium, kuzergazt

They did plan for that, but it was literally a forgotten dongle that made it impossible in the allotted time they had together. They needed the phantom camera hooked up to their laptop, but they didn’t have their Ethernet to USB-C dongle on the day of recording. They also weren’t going to use a random part they just bought that day, without extensive testing first. As the Phantom setup they have costs over $200,000.

Chad

And also got shot by that arc

*5:39

maybe just mention the apps you use in your comment, so it benefits all in the community lmao

@@poiu477 any AI app can do

But the file wasn't on a computer. Each 2 second shot is equivelant to several days of normal time, so just transferring the file will take hours, as will processing the frames

@@robinleicester yeah thankfully its something you could plug in as an external drive and go be productive elseware while it finds it for you. It doesnt matter how long it takes as long as its not taking your life's time.

@@poiu477 The app I use is Visipics but there are a ton of options.

Mehdi is very talented. :)

_„There is motion detection available by Phantom themselves, but it requires a PC. We brought a notebook but forgot an Ethernet to USB-C dongle.”_

On the slow mo guys video in the comments on their own video , they mention the Phantom ACTUALLY has a function like this, but they forgot to bring the cable to use it

@@tippership haha whoopsie