ELECTRONIC PROBLEMS with the GILERA RUNNER 180 so we Fitted a MALOSSI FORCEMASTER....

Рет қаралды 4,446

Күн бұрын

#urbanriders #scootertuning #malossi #gilera #gilerarunner180
It seems like this Gilera runner is never without any faults! But that is what two-strokes are like... Watch as we find some issues with the ignition, relays and eventually change out the CDI for a new Malossi Forcemaster 2!
Follow us:
Visit Our Website: urbanriders.odoo.com/
Instagram: / urban_riders
Facebook: / a4mdistributors
If you would like to directly support the channel:
Patreon: patreon.com/UrbanRiders
Timestamps
00:00 - Intro
00:18 - Unboxing
01:37 - Strip Down
02:01 - Replacing the Relays
03:54 - Malossi ForceMaster
07:04 - GIVEAWAY
07:15 - Start up
08:02 - All Back Together
08:40 - Clayton's Test Ride
10:28 - My First Ride
11:14 - Top Speed Run
13:53 - What we Think is Wrong
14:33 - Outro

Пікірлер: 43

@christokeyser7052 11 ай бұрын

I'm loving these videos! The production quality is top notch well done guys

@urban_riders 11 ай бұрын

Thank you!

@DamnnSonnn 11 ай бұрын

That thing looks like it’s hard to handle! Crazy power 😅

@harrynelson9203 3 ай бұрын

Just watched the whole build, absolutely amazing, we love these over here in the UK mate 👍🏻👌🏻❤️🇬🇧

@Vinchii 5 ай бұрын

Add a pwk 24mm carburetor to it n it should work just fine that's the set up I got on my 180

@P2DAPIPE 11 ай бұрын

Love the riding vid 😊

@johnarrowsmith8032 3 ай бұрын

Machine pal ❤❤😂😂 fast nice

@thevoicewithin930 11 ай бұрын

You need to fit a float seat with a larger flow rate. Nothing to do with pump since carb is not directly supplied by pump, but gravity fed from the degasser tank. Dude, there are far easier ways to get to the CDI, lol. Why don’t you phone your uncle Stan? 😂 Also, why don’t you do a plug chop and take a reading, that will tell you exactly what you need to be doing ?

@urban_riders 11 ай бұрын

Haha, we are looking into this. We did do a plug pull in one of our last videos. its seems better now with the bigger jet!

@Dubsicle 11 ай бұрын

I might consider a Malossi digitronic too, for my piaggio zip .. but first get new plastics 💪

@urban_riders 11 ай бұрын

You should try it out!

@Dubsicle 11 ай бұрын

@@urban_riders When i have some extra cash, i'll look into it ... 😎

@AdrianA4M 11 ай бұрын

I think the carb float bowl is running dry/low at high speed. The carb can not fill up fast enough. It's not jetting imo.

@urban_riders 11 ай бұрын

That seems to be it!

@Schoolpunt123 9 ай бұрын

The problem is as far as I can hear the fuel supply. I do not suspect the jet in the carb. It seems to me that the fuel flow from the pump or petcock is not enough. So first check the fuelflow coming from the pump wihich goes to the small fuel resevoir and the fuelflow from this resevoir which leads to the carb.

@urban_riders 9 ай бұрын

Definitely what we have figured out since then! The fuel pump was running itself dry. So new bigger lines (they’re perished) and a better bottle.

@projectclark123 11 ай бұрын

Can you get a gilera runner 125 4 stroke please and put some parts on cos im getting one on Tuesday

@urban_riders 11 ай бұрын

Maybe one day we will have our own on the channel. But for now I think I know someone who might have one 🤔

@ViralsnippetsYT 11 ай бұрын

Ive had experiance with this, my runner 70 had a 28mm carb and that was draining too. The pump is sufficient but the feul peg/cog doesnt let enougt fuel through, you should get a malossi or RMS 9mm fuel peg/cog. That wil ket enough fuel trhough and stop the carb from draining.

@urban_riders 11 ай бұрын

We have since discovered the size of the fuel peg/cog is way too small. So we will have to change that as well as the fuel lines. They seem to be perishing as well

@oneway_sting 11 ай бұрын

I thought these were only good if fitted alongside an inner rotor ignition? unless I am confusing it with something different. try upping the jet and seeing what it does, if it doesn't change anything, go back and richen the needle, if that doesn't help with that lean condition you're having, try a bigger carb? OR look at getting a bigger/faster pump?

@urban_riders 11 ай бұрын

Hmm.. I haven’t heard about that regarding the rotor ignition. But maybe it’s something to look into! Thank you! We’re already quite big on the carb. But the conclusion we’re coming to is that the carb is draining too quickly and not getting enough fuel. So next will have to be a fuel pump and bigger fuel lines!

@oneway_sting 11 ай бұрын

@@urban_riders looking forward to the upcoming videos and I hope he fixes the lean top end :D

@I_am_BiG_Al 10 ай бұрын

Do you know what other engines will work in my gilera? I want something like a 250cc vespa or 300cc piaggio beverly engine but will i need the wiring loom too or could it plug straight in?

@urban_riders 10 ай бұрын

The engine mounting should be the same but with regards to the electrical, I’m almost certain you would have to swap the loom.

@I_am_BiG_Al 10 ай бұрын

@@urban_riders OK thanks alot 👍

@user-xk6hr7bc5v 8 ай бұрын

And put a bigger jet to solve the problem on high speed.

@DaltonWalters-jx1fv 11 ай бұрын

❤ Fuel pressure, she's drinking more than the pump can supply at higher rpm and speed. Regulator, bigger jetting...? In all honesty, the simplest or basic issue is usually the problem - first hand experience. Ask Noah, or Oom Zain. 😊 PS: Why you be lazy yo, why you not loosen or remove the panel covering the Force thingy? ❤ 2 all

@urban_riders 11 ай бұрын

We are thinking its the fuel pump and hoses, definitely what we are looking into! And... those panels are terrible to remove without taking everything off hahaha.

@wikgopi8816 9 ай бұрын

Your begin is falt to open menn you need to open first the air roaster at the front by youre feets

@rtoebak76 8 ай бұрын

Only remove the side for the digitronic.

@darwinflorencio9234 11 ай бұрын

Link for the part please

@urban_riders 11 ай бұрын

urbanriders.odoo.com/shop/5511399-malossi-digitronic-variable-advance-controller-279?category=46#attr= If you are in South Africa

@sx8095 11 ай бұрын

Salut, le pneu arrière est monté à l'envers 😮

@slimfit767 5 ай бұрын

How fast is a stock 180?

@urban_riders 5 ай бұрын

Completely stock they get about 140kph sometimes a bit more. With the mods it gets there in a fraction of the time. 😅

@slimfit767 5 ай бұрын

@@urban_riders wow,I'd get one but the unavailability of parts is holding me back

@urban_riders 5 ай бұрын

@@slimfit767 Engine and Drive parts are not difficult to get. As long as you not missing too many chassis items. Get one, they super fun to ride.

@slimfit767 5 ай бұрын

@@urban_riders will certainly look into it

@noobgames1900 11 ай бұрын

160 is quite big it will probably run more agressive with smaller jet it sounds like the fuel pump cant keep up sounds just how mine sounded

@urban_riders 11 ай бұрын

Definitely looking into the fuel pump

@user-xk6hr7bc5v 8 ай бұрын

What your friend is doing is extremely dangerous. If he pops a wheelie ALWAYS have 2 fingers on the back brake.

@urban_riders 7 ай бұрын

Some people just need to learn the hard way! lol