Electronic Throttle Wiring Test

No video

Electronic Throttle Wiring Test

Рет қаралды 42,439

Күн бұрын

Electronic Throttle Wiring Test goes into details on testing and operation on electronic throttle systems. We also make use here of electrical interactive wiring diagrams and the logic on diagnosing ETC.
www.autodiagnos...
www.autodiagnos...
www.autodiagnos...
www.autodiagnos...

Пікірлер: 37

@lonelyndlovu7145 2 жыл бұрын

These are the best videos l have ever came across. The instructor is smart enough to give full contant of the product.

@tnamen1307 6 жыл бұрын

Sir, i would be very much pleased to get a video on the work of BCM module. Thanks

@ADPTraining 6 жыл бұрын

Body Control Module, I already have some videos on my channel here ADPTraining on body modules, but it is a good fit for these Wiring Diagram videos I'm doing now, thanks for the idea, Mandy.

@tnamen1307 6 жыл бұрын

ADPTraining sir, would be pleased if you can kindly specify the title of those videos illustrating the working of BCM or its related. Since, after having been searching for this BCM video, I couldn't locate. Thanks.

@S.khan.123 Жыл бұрын

I spray throttle cleaning spray inside throttle body means inside gear spring assembly,any problem will occur?

@ADPTraining Жыл бұрын

No, just don't touch it.

@goromadness9755 Жыл бұрын

Hi I'm testing the motor connector with a multimeter on a 2006 ford explorer. The negative probe on the battery and with the positive probe I check the two socket contacts. And both of them give me 3.7 volts. I guess thats is wrong right? One socket contact should give 5 volts and the other 0 volts? thanks

@ADPTraining Жыл бұрын

Not really, see the wiring diagram.

@ozzstars_cars 6 жыл бұрын

Thanks!

@ADPTraining Жыл бұрын

Cool

@deadonarrivalparanormal981 3 жыл бұрын

So can you do a continuity test on the electric throttle sensor motor pins? I am not getting any on the positive and negative????

@ADPTraining 3 жыл бұрын

Sure, use our Electrothrottle and Blue Voltage testers to do a full throttle unit test.

@ahmedprince9401 5 жыл бұрын

thank you

@ADPTraining 2 жыл бұрын

👍❤️

@welchsgrape696 4 жыл бұрын

is the H-bridge included within the ECM? or is it in series between the ECM and the throttle?

@ADPTraining 4 жыл бұрын

Yes to both. It's just a circuit within the ECM. I employ the exact circuit inside my ELECTROTHROTTLE Tester. autodiagnosticsandpublishing.com

@Turtlefarm Жыл бұрын

Say someone wanted to wire something and needed to connect/read tps values… any way to identify the proper tps return wire?

@ADPTraining Жыл бұрын

Power, Gone and return.

@ng6585 3 жыл бұрын

Am getting voltage in sensor ground wire at connector but not in ecu pin and there is no continuity in that wire .can u plz let me know that am I checking it in right way and also will control wire has voltage when ignition on

@ADPTraining 3 жыл бұрын

So use Electrothrottle tester to test ETC and Blue Voltage to test ECM wiring. You need the right tools.

@freemanfreed1581 5 жыл бұрын

My throttle body has three pins for the motor and three pins for the TPS. the DC motor and TPS are not on the same side as in you . they are in separate place on the throttle body. Why does the motor have three pins? What is the third pin?

@ADPTraining 5 жыл бұрын

You probably have 2 pins for ground or one pin is NC not connected. My ELECTROTHROTTLE had a yellow continuity light as soon an you connect to the throttle motor. www.autodiagnosticsandpublishing.com/etc_electrothrottle_electronic_throttle_tester.html

@tonyreese306 3 жыл бұрын

Where can I get that wire diagram program ..and where did you buy the 5v power supply ..need help!!!!!!!!!

@ADPTraining 3 жыл бұрын

Ok, I can help. Go here...www.autodiagnosticsandpublishing.com/Automotive_Interactive_Wiring_Diagrams.html And go here...www.autodiagnosticsandpublishing.com/ecm_reference_voltage.html