How To Replace Control Arm & Trailing Arm Bushings(DIY Tool)
Рет қаралды 365,985
7 жыл бұрынLearn how simple it is to replace control arm & trailing arm bushings, or knuckle bushings(as shown in this video) by using the DIY press tool shown in this video. It will make removing old, worn, noisy bushings an easy task. Parts for this control arm & trailing arm bushing tool can be purchased at your local hardware store or home improvement store for under $20. This tool can also be modified for different size bushings by using larger pipe and different size sockets. You can also use this tool for other applications. Save a lot of money by replacing the bushing yourself, instead of paying a machine shop to do the job. Enjoy!
**My Automotive & Mechanical playlist link is below:
• Automotive & Mechanical
**Help me make more videos by visiting the link below. All donations, big or small, would be greatly appreciated. Thank you!
paypal.me/electronicsNmoreYT
Bobby Tectalabyss & bklynlandlord, Thanks for your generous $5/mo donation!
**For GREAT deals(Usually cheaper than EBAY) on Automotive tools/supplies,. electronics, drones, household items, phone accessories, locksmith tools, & much more, please visit the link below and SAVE IT AS A BOOKMARK on your computer or smartphone to Banggood for future purchases. (Your purchase supports my channel!)
All Items: bit.ly/2cgYr14
Flash Deals: bit.ly/2cb6CZB
*Try these money saving coupon codes: BGAFF7 or affiliate6 or elec or measure* or ask if other codes are available!
Thanks For Watching!
**If you enjoy watching my videos, then be sure to SUBSCRIBE, POST LINKS to my videos on other websites & blogs, rate "THUMBS UP", and check out my video playlists. Doing so helps to ensure that many more videos will be uploaded to my YT channel in the future. (Views are absolutely essential to ensure this channel remains in an active state)**
@electronicsNmore 3 жыл бұрын
ATTENTION: In the video I referred to the suspension part with the faulty bushing as the "Trailing Arm", that was incorrect. I was replacing the KNUCKLE BUSHING. Thanks for watching!
@dappa311 3 жыл бұрын
Where did you purchase those Grade 8 bolts, nuts and washers? I was searching for something like this last week, had to press in a wheel hub sleeve
@sarawakiansborneo418 Жыл бұрын
Yup..can used for upoer arm bushing s too..Honda civic ek 1996
@thebordernow 3 ай бұрын
Yeah, I was wondering.... that was some odd Vertical "trailing" arm.....but great content and explanation.
@richsmith9063 8 ай бұрын
Academy Award Winning material. Seriously, good stuff !!! Thanks.
@deanoscott 3 жыл бұрын
Rather than a long bolt, which as you pointed out, bottoms out, use threaded bar. Works a treat.
@electronicsNmore 3 жыл бұрын
A fine thread rod is great too. Thanks for watching Dean! Be sure to look over my video playlists below for many other videos of interest to you, and most importantly take one minute to share a link to my channel with others on social networking sites. kzfaq.infoplaylists
@deanoscott 3 жыл бұрын
@@electronicsNmore absolutely bud. Just my kind of channel. New subscriber here 👌 great work.
@phillipzan2005 5 жыл бұрын
I been fixing vehicles for 10+ years. And that was a real slick idea. I love learning new ideas from all kinds of people.
@electronicsNmore 5 жыл бұрын
Glad you enjoyed my video Phillip! Be sure to watch my "Automotive & Mechanical" video playlist and most importantly share my channel with others. Thanks
@andrewlietzow7739 2 жыл бұрын
Thank you so much. I am stuck in a downward spiral toward a complete dead end, but this bushing compression tool may save the diy project. I was "simply" intending to change the rear wheel bearing in my GMC Terrain, until I snapped off two of the four bolts holding the WB to the knuckle. That led to a decision to remove the knuckle, and thus the need to remove two control arm bushings. You have given the weekend, wannabe thorough mechanic hope!
@dysphunktion 4 жыл бұрын
Out of at least 5 videos and 3 or 4 writeups on how to do this without specialty tools, your video is the one that made the most sense to me, lol. I mean, everyone else did/said something similar but what clicked for me was having that socket the right size to slide through the arm/into that fitting. Thanks so much man. I think the spiders in my garage now know how to curse :P
@electronicsNmore 4 жыл бұрын
Glad you liked the video!
@alexanderSydneyOz 7 жыл бұрын
Great idea and presentation! that is a benchmark in clear instruction video. cheers.
@electronicsNmore 7 жыл бұрын
Thanks Alexander! Be sure to share my channel with your friends, rate thumbs up, and check out my Automotive/Mechanical video playlist.
@treyharris6221 4 жыл бұрын
Thank you so much for this. I have a 2001 Sonata and your method worked beautifully. Only thing I had to do differently was to use a 1-1/2" nipple and pipe cap. The 1-1/4 was just too close. Awesome hack, my man!
@electronicsNmore 4 жыл бұрын
You're welcome Trey! Glad it worked out. Be sure to look over my extensive video playlists below for many other videos of interest to you, use supplied Amazon links to support my channel when making purchases(No added cost to you), and share links to my videos with many others on social networking sites. Thank you kzfaq.infoplaylists
@NiftyThrifty 3 жыл бұрын
Same 1 1/2 worked great for me
@maddrichstaks7787 10 ай бұрын
Same here..
@michaelgillespie3207 4 жыл бұрын
I keep a couple different sizes of hardened threaded rod to make my own bushing presses. and when you are putting everything back together make sure that the vehicle is at "ride height" when tightening any bushing thru-bolt (unless specified in the factory service manual) in order to avoid shortening the life of the bushing.
@Scottsudz84 4 жыл бұрын
How are you able to tighten it if you have the wheel back on and it isn't accessable . Do you have to do it in a pit or on a hoist ?
@pastytit 3 жыл бұрын
@@Scottsudz84 jack hub
@thebordernow 3 ай бұрын
@@Scottsudz84 Jack the car up, place it on jack stands, then use the floor jack under the suspension to jack it to typical compressed, on-road position.
@pto200 6 жыл бұрын
Very well done. Great job without a lot of investment. Thank you.
@capri2wd 7 жыл бұрын
even in well kited out garages we end up doing this as so many different sizes of bush and sometimes no way of getting the part to sit correctly in the press. Nice demo. there will be a kit available that is essentially the same as what you made but would be like $100.
@electronicsNmore 7 жыл бұрын
Glad you enjoyed the video! I couldn't find a kit locally. They all had the wrong sizes.
@grantdawson9262 14 күн бұрын
Thank you for the great detail that you included in this vid. Great job.
@seanthomasrauchert1695 5 жыл бұрын
Great was planning on making one of these! Perfect!
@electronicsNmore 5 жыл бұрын
Hope it works out well for you Sean! Be sure to watch my "Automotive & Mechanical" video playlist below, rate thumbs up, subscribe, and most importantly share my channel with many others. Thank you! kzfaq.info/get/bejne/ntSUarNotMXadYU.html
@ucanoe 2 жыл бұрын
thanks for taking the time to show us this great work around method
@pastormartinez4676 5 жыл бұрын
Ingenuity at its best! I’ll return the favor by advising you getting some ratchet wrenches... I can’t live without them since I used them for the first time. You’ll love them!
@electronicsNmore 5 жыл бұрын
I explained in the comment area several times why adjustable wrenches were used. :-) Thanks for watching!
@user-ne8ms4ij6v 2 жыл бұрын
Very impressive 🤙🏽 going to give it a try on our 05 honda crv knuckle bushing headed to the hardware store. God bless
@alfanhadi4638 5 жыл бұрын
That is just beautiful. Smooth like butter. Thumbs up for the video
@electronicsNmore 5 жыл бұрын
Thanks Alfan! Be sure to look over my extensive video playlists below for other videos of interest to you, and most importantly share my channel with many others. kzfaq.infoplaylists
@4BillC 5 жыл бұрын
Awesome idea! I have some knuckle bushings I need to change. I just may have to try this...
@electronicsNmore 5 жыл бұрын
It works when made properly. Be sure to look over my video playlists below for other videos of interest to you and most importantly share my channel with many others. Thank you Bill! kzfaq.infoplaylists
@gregmelton9355 3 жыл бұрын
Great video! Clear and concise. Much appreciated!
@electronicsNmore 3 жыл бұрын
You're welcome Greg! Be sure to look over my video playlists below for many other videos of interest to you, and most importantly take one minute to share a link to my channel with others on social networking sites. Thank you! kzfaq.infoplaylists
@willvarden1181 5 жыл бұрын
This is amazing! I made one for my mk3 supra. Works like a charm even on 30+ year old bushings
@electronicsNmore 5 жыл бұрын
Great to hear Chase! Be sure to look over my extensive video playlists below for other videos of interest to you and most importantly share my channel with others. Thank you! kzfaq.infoplaylists
@brianleonard6879 4 жыл бұрын
What size socket and pipe cap did you use on the supra?
@tectalabyss 7 жыл бұрын
Hi Doug. Well done buddy. I've had to do similar mods here at home and at work,over the years. Thank you for sharing. All my best. Bobby
@electronicsNmore 7 жыл бұрын
Glad you enjoyed the video Bobby!
@SRZRB 5 жыл бұрын
Just ran across this. Gonna make one tomorrow. Awesome
@electronicsNmore 5 жыл бұрын
Great to hear! Be sure to share my channel with others, and look over my extensive video playlists below. Thanks! kzfaq.infoplaylists
@sirsweetness8332 4 жыл бұрын
Made one recently with PVC 2” for taking out bushings from knuckle in a Toyota Not used it yet waiting for bushings to be delivered. Used an old lawnmower blade in place of deck plates you used. Cut blade in center with cutoff tool. No metal outer on knuckle bushings. Just rubber.
@electronicsNmore 4 жыл бұрын
PVC? Wow, way too weak for my car.
@sirsweetness8332 4 жыл бұрын
electronicsNmore I just went to Home Depot and bought a galvanized nipple just in case PVC breaks or cracks.
@sirsweetness8332 4 жыл бұрын
electronicsNmore PVC worked. First bolt stripped smooth and second bolt did the job. PVC unscathed
@joniferdoladol4277 5 жыл бұрын
That's cool idea men thank you for sharing it i love it
@electronicsNmore 5 жыл бұрын
You're welcome Jonifer! I have many videos that cover a wide range of subjects, so be sure to look over my extensive video playlists below for other videos of interest to you and most importantly share my channel with others so I'm able to make more helpful videos well into the future. Thank you! kzfaq.infoplaylists
@Pyridox 7 жыл бұрын
Excellent video. Thanks for the idea & tips. This turns out to be a much cheaper solution than buying an entire kit for $100+ dollars.
@electronicsNmore 7 жыл бұрын
Yes, especially if you have sockets laying around, and both sizes of galvanized pipe(1 1/4" & 1 1/2").
@RTD1947 5 жыл бұрын
Great idea!! Nice job doing a DIY.
@electronicsNmore 5 жыл бұрын
Glad you enjoyed my video! Be sure to share my channel with others, and look over my extensive video playlists below for other videos of interest to you. Thanks kzfaq.infoplaylists
@anhhaineou.s.a425 3 жыл бұрын
Thank you for sharing I am about to do mine .
@zdd22fixes47 2 жыл бұрын
Very cool... About to replace the lower control arms on a Nissan Navara D22 ZD30 and looking for ways to remove the "inner rear c.a chassis bush" on the rail... This is a classic my man! I'm stuck in the Au bush trying to do this too :) never a dull day eh very clever!
@electronicsNmore 2 жыл бұрын
Glad to help
@RahkmanX 5 жыл бұрын
Great video! I'm glad I found this!
@electronicsNmore 5 жыл бұрын
Thanks! I have a lot of great videos on my channel that cover a wide range of subjects, so be sure to look over my extensive video playlists and most importantly share.
@NiftyThrifty 3 жыл бұрын
YOU SIR DESERVE AN AWARD! 05 Sonata could not get bushing out for the life of me. This worked perfect!! Came out like butter. Thanks for saving me money!
@electronicsNmore 3 жыл бұрын
Same car. Great to hear! Be sure to check out my wide range of videos and share. Thanks
@vstrom9586 5 жыл бұрын
what a great idea, thanks for sharing
@electronicsNmore 5 жыл бұрын
Thank you! Be sure to look over my video playlists below for other great videos of interest to you, and most importantly share my channel with many others. kzfaq.infoplaylists
@Shamus71 5 жыл бұрын
I have to do the trailing arm bushings on my BMW and I’m not keen on buying a $189 set. I’ll go this route. Thank you for this video.
@electronicsNmore 5 жыл бұрын
You're welcome Shane! Just look for the right size socket and use a fine thread bolt. Be sure to look over my extensive video playlists below for other great videos of interest to you, and most importantly share my channel with others.Thanks kzfaq.infoplaylists
@rkbyrd4432 6 ай бұрын
Excellent tutorial! Thanks for putting this together. The only thing I would do differently is to put a thin film of high temp (red) grease on the outside of the new bushing to allow it to slide in a little easier. Good job!
@ernieg1415 5 жыл бұрын
good job, thanks for sharing it with us
@electronicsNmore 5 жыл бұрын
Thank you Ernie! You're welcome. Be sure to look over my "Auto & Mechanical" video playlist below for other great videos of interest to you, and most importantly share my channel with many others. kzfaq.info/get/bejne/ntSUarNotMXadYU.html
@johnjoe6529 2 жыл бұрын
Thank you sir, very simple, very easy and not expensive.
@electronicsNmore 2 жыл бұрын
Glad it helped! Be sure to rate thumbs up and share the video link with others. Thanks
@mikeharley1292 4 жыл бұрын
Awesome video and very helpful, thanks a lot for share this information, I need to change bushing track bar, thank you very much!!!
@electronicsNmore 4 жыл бұрын
You're welcome Mike! Be sure to check out my wide range of videos and share. Thanks!
@jhsu57 3 жыл бұрын
It is easy to find all the parts needed. Thank you.😁
@electronicsNmore 3 жыл бұрын
You're welcome!
@snertlegrubber 5 жыл бұрын
Genius! and this idea could be expanded for many more bushes I guess
@electronicsNmore 5 жыл бұрын
Thanks for watching Rob! Be sure to look over my extensive video playlists below for other videos of interest to you and most importantly share my channel with many others. kzfaq.infoplaylists
@Adam-qr4jj 5 жыл бұрын
Great video, what a great way to save money, Thank You.... Cheers!
@electronicsNmore 5 жыл бұрын
Be sure to look over my "Auto & Mechanical" video playlist below for other videos of interest to you, and most importantly share my channel with many others. Thanks! kzfaq.info/get/bejne/ntSUarNotMXadYU.html
@David-yh5po 4 жыл бұрын
Thanks for sharing this video with us.
@electronicsNmore 4 жыл бұрын
You're welcome Dave! Be sure to check out my wide range of videos for many other videos of interest to you, and most importantly share my YT channel with others. Thank you kzfaq.infoc/playlists
@d-s-ll2378 5 жыл бұрын
Genious, n I also like your style of talking.👍
@electronicsNmore 5 жыл бұрын
Thank you! Glad you liked my idea and enjoyed the video. Be sure to look over my "Auto & Mechanical" video playlist below for other great videos of interest to you, and most importantly share my channel with others. kzfaq.info/get/bejne/ntSUarNotMXadYU.html
@davenichols9384 4 жыл бұрын
Very good demonstration and diy parts. Awesome video 👍
@electronicsNmore 4 жыл бұрын
Thanks Dave! Be sure to look over my extensive video playlists below for many other videos of interest to you, and share links to my videos with many others on social networking sites. kzfaq.infoplaylists
@aerotuc 4 жыл бұрын
this is the way to do it ,least work involved and cheapest.The best advice ,same as i practice is your safety precautions.thanks.
@electronicsNmore 4 жыл бұрын
Glad you enjoyed the video! Be sure to look over my "Auto & Mechanical" video playlist below, and most importantly share my channel with many others. Thank you kzfaq.info/get/bejne/ntSUarNotMXadYU.html
@micthegreasemonkey2918 4 жыл бұрын
Isnt it the greatest feeinng in the world when it finaly comes out !!!
@watermanone7567 7 жыл бұрын
Great job. Thanks for the video's.
@electronicsNmore 7 жыл бұрын
You're welcome! Be sure to rate thumbs up and share. Thanks
@TBruce1380 5 жыл бұрын
Doing this now....in a sorta different way.....except the only thing left on the bushing was the metal shell stuck inside..great video!
@electronicsNmore 5 жыл бұрын
Hope it works out for you! Be sure to look over my "Auto & Mechanical" video playlist below and share. Thank you! kzfaq.info/get/bejne/ntSUarNotMXadYU.html
@michaelpark5589 5 жыл бұрын
Great idea and presentation!
@electronicsNmore 5 жыл бұрын
Glad you enjoyed it Michael! Be sure to look over my extensive video playlists below for other great videos of interest to you, and most importantly share my channel with others. Thank you kzfaq.infoplaylists
@19211265 5 жыл бұрын
Excellent well done 👍🏻 I subscribed
@electronicsNmore 5 жыл бұрын
Thank you! Be sure to look over my extensive video playlists and share.
@michaeljohnson9405 4 жыл бұрын
Great idea! I like to see others coming up with ingenious ideas to accomplish tasks that can prove quite difficult. I do things like this on the fly, but I never think about making a video until my wife says how genius it was. Absolutely love this idea and video!
@electronicsNmore 4 жыл бұрын
Thanks for watching Mike! Be sure to look over my extensive video playlists for many other videos of interest to you, and most importantly share links to my videos on social networking sites. kzfaq.infoplaylists
@hotflashfoto 5 жыл бұрын
What a really intelligent and simple solution! Thank you. The only suggestion I would offer is to use anti-seize for the inside of the opening. It will help if you have to remove it and won't absorb or attract water like soap does. I have some bushings that will need attention soon and this is now on my list of how to do it!
@electronicsNmore 5 жыл бұрын
Glad you enjoyed the video! Be sure to look over my "Auto & Mechanical" video playlist below and share. Thank you! kzfaq.info/get/bejne/ntSUarNotMXadYU.html
@felixcat4346 7 жыл бұрын
Great tip. You probabily can use this with a different size socket to replace a lot of bushings this way. The tool from Autozone works pretty good.
@electronicsNmore 7 жыл бұрын
Yes, use a smaller socket for smaller bushings. :-)
@braydenc3001 5 жыл бұрын
Good video, very well presented
@electronicsNmore 5 жыл бұрын
Glad you enjoyed it! I have many great videos on my channel, so be sure to look over my extensive video playlists for other videos of interest to you, rate thumbs up, and most importantly share my YT channel with many others. Thank you!
@carlosbmartinez6457 Жыл бұрын
Great job.. loved it
@theonlyonegrimey 5 жыл бұрын
Good shit that's an awesome idea 👍👍definitely making me one lol
@electronicsNmore 5 жыл бұрын
Glad you liked the video! Also look over my "Automotive & Mechanical" video playlist below for other videos of interest to you, and most importantly share my channel with many others. Sharing by viewers is extremely important. Thanks kzfaq.info/get/bejne/ntSUarNotMXadYU.html
@yrtuag 5 жыл бұрын
Sweet, great idea and job 👍😎🤠
@electronicsNmore 5 жыл бұрын
Thank you Jim! Be sure to look over my "Auto & Mechanical" video playlist below for other great videos of interest to you and most importantly share my channel with others. kzfaq.info/get/bejne/ntSUarNotMXadYU.html
@davegeorge7094 5 жыл бұрын
I take lots of time do engineer this, i did bushing replacement on a Supra with threaded rods, iron stock, etc. from the hardware store and now have a multi-purpose press.
@electronicsNmore 5 жыл бұрын
A press is VERY handy to have. :-)
@maddrichstaks7787 3 жыл бұрын
Great work with simple attachments
@electronicsNmore 3 жыл бұрын
Glad you like it! Be sure to look over my video playlists below for many other videos of interest to you, and most importantly take one minute to share a link to my channel with others on social networking sites. Thanks kzfaq.infoplaylists
@The_R-n-I_Guy 4 жыл бұрын
I'm in the middle of changing all the bushings on my 96 Buick Roadmaster. Checking out all the different ways people do it without special tools. I've been collecting metal plates and big washers left over from projects at work. Now I just hope I have the right size sockets. If not, I'll be cutting and welding some scrap metal together to get it done.
@electronicsNmore 4 жыл бұрын
Thanks for watching Dan!
@DesertLyons22 4 ай бұрын
Beautiful! Thanks for sharing your idea!
@electronicsNmore 4 ай бұрын
Glad you liked and appreciated the video! Be sure to check out my extensive video playlists for many other videos of interest to you and share. Thank you
@TheSAMMY79 6 жыл бұрын
good idea...smart man
@electronicsNmore 6 жыл бұрын
Thanks for watching Kevin! Be sure to check out my extensive video playlists for other great videos of interest to you, rate thumbs up, and share my channel with others.
@sarawakiansborneo418 Жыл бұрын
Useful DIY tool..save much money to a special tool
@Edmorbus 7 жыл бұрын
Thanks for sharing
@user-kq5tc4zh1b 5 жыл бұрын
Great Idea! thanks ♥️
@electronicsNmore 5 жыл бұрын
Glad you liked it! Be sure to look over my "Auto & Mechanical" video playlist below for other videos of interest to you, and most importantly share. Thank you kzfaq.info/get/bejne/ntSUarNotMXadYU.html
@skyscraper37 7 жыл бұрын
Good idea! Now take some of the money you saved by diy and get a set of ratcheting box wrenches
@electronicsNmore 7 жыл бұрын
Already have them in storage. :-) I used what I had laying around.
@mdrew44628 7 жыл бұрын
electronicsNmore I was going to say the same thing, but to be fair, I probaby couldn't find the right wrenches either ( 6 metric socket sets...all missing the 10 mm and 14 mm sockets....disappeared into the garage ether...lol) Very clever idea btw
@electronicsNmore 7 жыл бұрын
My tools are very limited right now because I'm traveling a lot.
@rodger6940 5 жыл бұрын
@@electronicsNmore can you please tell me what size is the bolt and where did you get all the things from
@ro33west 5 жыл бұрын
@@electronicsNmore we commend you for traveling and not paying into Donald Trump's system Amen.
@stateboy80892 5 жыл бұрын
Sir you are a genius!!
@electronicsNmore 5 жыл бұрын
:-). Thanks for watching! Please share.
@bosanovaboy 4 ай бұрын
Excellent video thank you
@johnpruittpruitt4677 7 жыл бұрын
thanks for this
@Raptor-700R 5 жыл бұрын
Great idea love it
@electronicsNmore 5 жыл бұрын
Thanks, please share.
@jtlgarage7751 5 жыл бұрын
how can people click on dislike button for a great instruction video like this?? thanks mate this video help me so much :)
@electronicsNmore 5 жыл бұрын
It's KZfaq, there are many Trolls and undesirables. Not everyone is appreciative like you. Thanks for watching! Be sure to check out my video playlist below and share. :-) kzfaq.info/get/bejne/ntSUarNotMXadYU.html
@DennisRundle 11 ай бұрын
Great idea I'm going to make one this weekend, saves me buying a bushing tool, it's a budget bushing project, like on a shoe string,....
@maclyn36 5 жыл бұрын
Very clever ....... With a bit of thinking you can find a way to solve most problems ....well done
@electronicsNmore 5 жыл бұрын
Thanks! Be sure to look over my "Auto & Mechanical" video playlist below and share. kzfaq.info/get/bejne/ntSUarNotMXadYU.html
@randaldell-spector3431 6 жыл бұрын
like ya style mate!
@electronicsNmore 6 жыл бұрын
Glad you enjoyed my video! I have many excellent videos on my channel, so be sure to look over my extensive video playlists for other videos of interest to you. Also be sure to rate thumbs up and share. Thanks
@shamskl3245 5 жыл бұрын
Well done 👍
@electronicsNmore 5 жыл бұрын
Thank you! Glad you enjoyed the video. Be sure to watch and share my "Automotive & Mechanical" video playlist below. kzfaq.info/get/bejne/ntSUarNotMXadYU.html
@andybozeman9769 4 жыл бұрын
Too cool! Thanks. Doing mine this weekend. Gonna get the bearing press from Auto Z. But, I'm concerned that it will be too bulky to use in the wheel well. I'm like you about taking that trailing arm off, don't want to have to do more wrenching than necessary! Thanks again! Ain't You Tube great!?
@electronicsNmore 4 жыл бұрын
Glad you enjoyed the video Andy! Be sure to share my channel with many others, so I'll be able to make more videos well into the future. Thanks
@mr.nobody4900 5 жыл бұрын
Out of the box idea. Two Thumps' Up.
@electronicsNmore 5 жыл бұрын
Glad you liked the idea! I have a lot of excellent videos on my channel that cover many different subjects, so be sure to check out my extensive video playlists for other videos of interest to you, rate thumbs up, and most importantly share my channel with others. Thank You
@viplegaleducation1292 5 жыл бұрын
Thoroughly enjoyed it!
@electronicsNmore 5 жыл бұрын
Great to hear! I have many helpful/interesting videos on my channel that cover a wide range of subjects unlike most channels on KZfaq, so be sure to look over my extensive video playlists for other videos of interest to you, and most importantly share my channel with many others. Thank you
@viplegaleducation1292 5 жыл бұрын
Any way I could message you directly? Email maybe?
@electronicsNmore 5 жыл бұрын
@@viplegaleducation1292 I can be messaged by visiting my channel main page.
@JS-ri2rx Жыл бұрын
Good effort well done
@train4905 2 жыл бұрын
A most superb job sir,well done
@electronicsNmore 2 жыл бұрын
Many thanks Stephen! Be sure to look over my extensive video playlists below for many other videos of interest to you, and most importantly take one minute to share a link to my channel with others. Thanks kzfaq.infoplaylists
@my2centz196 5 жыл бұрын
I have the same problem finding anything to press in my suspension bushings that go to the strut so I haven't fooled with them. I have bearing press kit like autozone has but nothing that will work. I gotta say I'm glad it worked. I was thinking of trying to make something similar but hadn't gotten around to it yet but now I know if will work and have a better idea of what to do I think I'll probably do it soon.
@electronicsNmore 5 жыл бұрын
I have many great videos on my channel covering many different subjects, so be sure to look over my extensive video playlists for other videos of interest to you and most importantly share my KZfaq channel with others. Thanks!
@23thebull 7 жыл бұрын
awesome very ingenious
@electronicsNmore 7 жыл бұрын
It had to be done. :-) Thanks for watching!
@23thebull 7 жыл бұрын
electronicsNmore you da man
@ernestlunsford3964 3 жыл бұрын
Thank you so much, awsome viedo!!!!!!
@electronicsNmore 3 жыл бұрын
You're welcome Ernest! Be sure to look over my video playlists below for many other videos of interest to you, and most importantly take one minute to share a link to my channel with others on social networking sites. Thank you! kzfaq.infoplaylists
@dotapromaster1254 5 жыл бұрын
amazing idea,.,same style of work,.what tools comfortable and near is fine.,.,
@electronicsNmore 5 жыл бұрын
Thanks for watching!
@nzrestoration9486 5 жыл бұрын
Nice work.
@electronicsNmore 5 жыл бұрын
Thank you! Please be sure to rate thumbs up, share my channel, and check out my other great videos.
@kriscaddens1992 7 жыл бұрын
That's a killa idea
@electronicsNmore 7 жыл бұрын
Never forget it. :-)
@samzchang 5 жыл бұрын
太聪明啦！敢于挑战常规！多谢分享！
@electronicsNmore 5 жыл бұрын
很高兴你喜欢我的视频!我有很多伟大的视频在我的频道, 一定要看视频播放列表, 最重要的是与他人分享我的频道。谢谢！
@GForceVRX 5 жыл бұрын
Your a legend well done!
@electronicsNmore 5 жыл бұрын
Glad you enjoyed it!
@GForceVRX 5 жыл бұрын
electronicsNmore I did mate thank you. I’ve got the same bush issue on my 2001 Mitsubishi Magna vrx, it’s the Australian version of the US Mitsubishi Diamante. I will use the same method;)
@JOEGGGJOE 5 жыл бұрын
Great idea 👍.
@electronicsNmore 5 жыл бұрын
Glad you liked it! Please share.
@hello_world_zz 2 жыл бұрын
You do not have ratchet man, but you have smart mind! Great idea!
@gregoryscavone1076 4 жыл бұрын
You sir are a genius
@electronicsNmore 4 жыл бұрын
Thanks for the kind words Greg! Be sure to look over my "Auto & Mechanical" video playlist below for many other videos of interest to you, and most importantly share. kzfaq.info/get/bejne/ntSUarNotMXadYU.html
@michaellee5084 5 жыл бұрын
great idea
@electronicsNmore 5 жыл бұрын
Glad you enjoyed the video Mike! I have many great videos on my channel that cover a wide range of subjects, so be sure to look over my extensive video playlists for other videos of interest to you and most importantly share my channel with many others. Thank you!
@denberholfule4551 5 жыл бұрын
thank you!!!
@electronicsNmore 5 жыл бұрын
You're welcome! I have a lot of excellent videos on my channel that cover many different subjects, so be sure to check out my extensive video playlists for other videos of interest to you, rate thumbs up, and share my channel with others. Thank You
@Marty09933 5 жыл бұрын
Great video
@electronicsNmore 5 жыл бұрын
Glad you enjoyed the video Marty! Be sure to look over my extensive video playlists below for other videos of interest to you, and most importantly share my channel with friends. Thank You! kzfaq.infoplaylists
@paulsjunkcars 5 жыл бұрын
Great idea.
@electronicsNmore 5 жыл бұрын
Thanks for watching Paul! Be sure to look over my extensive video playlists below for other great videos of interest to you and most importantly share my channel with many others. kzfaq.infoplaylists
@jeffsmith6953 11 ай бұрын
Glad someone around heres thinking!
@RalphCloud 2 жыл бұрын
great work !
@electronicsNmore 2 жыл бұрын
Thanks a lot! Be sure to look over my extensive video playlists below for many other videos of interest to you, and most importantly take one minute to share a link to my channel with others. kzfaq.infoplaylists
@rawdio.docdar5715 5 жыл бұрын
Well done sir
@electronicsNmore 5 жыл бұрын
Glad you enjoyed the video! Be sure to look over my extensive video playlists below for other videos of interest to you and most importantly share my channel with others. Thank you! kzfaq.infoplaylists
@leolevy925 5 жыл бұрын
Wonderful
@electronicsNmore 5 жыл бұрын
Glad you enjoyed the video Leo! I have many great videos on my channel covering many different subjects, so be sure to look over my extensive video playlists for other videos of interest to you and most importantly share with many others. Thank you!
@kellyokamoto1604 6 жыл бұрын
Great vid!!! Love the ingenuity. Instead of a "thin film of soap", would it be slightly more advantages to use an aluminum-based anti-seize for its rust prevention and lubricating properties???
@electronicsNmore 6 жыл бұрын
G&K Ol' School Glad you enjoyed it. I think a thin film of soap is fine.
@x9x9x9x9x9 7 жыл бұрын
I had to do this on a 97 Honda thankfully mine wasn't this bad.
@electronicsNmore 7 жыл бұрын
After 80-100k miles, they usually need to be replaced.
@thehilariousdarius8446 5 жыл бұрын
You should take this to Shark Tank LOL Awesome Vid.
@electronicsNmore 5 жыл бұрын
Glad you enjoyed the video! Be sure to rate thumbs up, watch my "Automotive & Mechanical" video playlist below, and most importantly SHARE my channel with friends. Thanks kzfaq.info/get/bejne/ntSUarNotMXadYU.html
D1NAZ02
Рет қаралды 3,1 МЛН
Ultimate Handyman
Рет қаралды 15 МЛН
Mechanic Rule
Рет қаралды 3,7 М.
Budget Build Garage
Рет қаралды 758 М.
BIGBRO TV
Рет қаралды 1,9 МЛН
Sash Dun
Рет қаралды 14 МЛН