Eliminate Brush Marks For The Perfect Finish

Рет қаралды 13,646

Жыл бұрын

#paintingtutorial #howtopaint #diypainting
In this video we are taught how to perfectly paint a door.
Starting with....
~prep work
~best brand of brush to use
~best type of paint to buy
~techniques to eliminate brush marks for the perfect finish
Jared reveals all the secrets!

Пікірлер: 27

@katielin2379 Жыл бұрын

Thanks for the painting technique lesson.

@kandrisa Жыл бұрын

Wow, I just painted my doors yellow on Friday and did a terrible job. Glad this came out for me to fix it.

@johnnyhoover2373 Жыл бұрын

Really good

@dhrtiwalter8670 Жыл бұрын

One more, if I need to sand first because my six panel solid pine doors weren’t sanded right the first time painted, do I need to use the paint thinner before I paint?

@jaredwilly1 Жыл бұрын

Don't use paint thinner, use lacquer thinner. Even if you just sanded the door wiping the door down with lacquer thinner will help remove dust and soften the previous paint surface.

@dhrtiwalter8670 Жыл бұрын

My painter used a small roller on my solid wood six panel doors to repaint a different color 🤔

@jaredwilly1 Жыл бұрын

I don't like the roller texture a roller leaves. Sometimes on large projects I will use a roller then brush out the roller texture, but you have to work fast you only have seconds to successfully remove roller marks.

@calvinwong365 13 күн бұрын

@@jaredwilly1rollers leave kinda egg shell like finish? I kinda see why you want to use brush. Leaves the long strokes on the paint so when the sun shines downwards, it looks more pleasing to the eye. Correct me if I'm wrong. At the same time paint brush vs roller/brush vs spray paint on this door. Wouldn't spray paint be quicker?

@bradydegrasse 15 күн бұрын

I don't mean to Rail, but I like your Stile! ha #dadjokes Seriously, thanks for the many great tips! I am about to build and finish a modular art desk that I just designed from scratch; so, I am gathering up all the paint tips I can. 🙏🙌

@WoodworkingWithWes 12 күн бұрын

Wow...sounds like a great project, glad we could be of help. Wes

@designer-garb572 Жыл бұрын

If you paint a door this way, by the time you have 2 coats or even 3 on a new door you will get build up around the edges of every panel, these should be kept clean and not built up. and a 2" brush is fine.

@jaredwilly1 Жыл бұрын

Yes keeping the edges from getting to much build up is important, that is why I like a angle sash brush and I use a very small brush to clean the edges.

@philbutcher6959 10 ай бұрын

Good point. He's not doing that door in 10 minutes either and it is a bit silly saying that to a amateur audience. I would also advise decanting your paint into a kettle (to stop contamination of dust and fibres).

@MAGAMAN 5 ай бұрын

"I started out at home depot working in the paint department" This is why you don't ask people at big box stores for advice.

@wallypoly563 Жыл бұрын

Never said if the original paint was latex or oil. Can't paint latex over oil, so I assume urethane alkyd enamel is OK over oil? Not enough data.

@jaredwilly1 Жыл бұрын

The original paint was latex. If it was oil then the process would still be the same. Using Lacquer thinner is more important as it helps soften the hard oil paint surface.

@jasonadams6442 Жыл бұрын

You can paint latex over oil. I do it quite often with great results.

@coachwalrus3158 Жыл бұрын

Sure you can But not the other way around

@vilsan.r.9875 7 ай бұрын

Unless you apply a coat of shellac based primer@@coachwalrus3158

@mijit.859 Ай бұрын

OK, here’s the thing ! You should always paint the 👉Panels first & foremost, then the Muntins,Lock Rails, & then finally the Stiles - that is the correct way to do it! And seriously this man did a great job, But it took him more than 10mins to just paint that panelled door 🚪 😕🥺😰🤦🏻‍♂️ I know because I’m a professional painter myself With all due respect! ✊

@freedom_aint_free 4 ай бұрын

It's not "alkalyd" it's "alkyd" ;-) thanks for the video !

@kevinverge8517 Жыл бұрын

laq thinner is a dirty solvent why would I want to add dirt to the surface. liquid T.S.P. or Chomp degreaser are better options. with out the V.O.C.

@basincut100 7 ай бұрын

Maybe it’s just me but all I see is brush marks.

@MAGAMAN 5 ай бұрын

There was absolutely nothing about eliminating brush marks in this video and the guy was literally throwing paint everywhere. I've never seen such a sloppy "professional" painter.

@calvinwong365 13 күн бұрын

Recommendations who to watch? I'm doing sloppy ass job at my family restaurant lmao. I have no time to do this. Got 20 feet left and right side room to paint. and it's hot as hell right now. Walls are in bad condition. What's worst is that this is lease, so the landlords are cheap ass motherfuckers, I don't want to put anymore large chunks of money cause alot of restaurants and old plazas are getting sold for condos. This is Ottawa, Ontario. Land of the crooked Trudeau

@scotty362100 Жыл бұрын

Well, it took 23min to paint 1/2 of a door! So i find it really really hard to believe an entire door can be done in 10-15 minutes. I see no reason why one would feel the need to "stretch" the truth in something so mundane. Even at 720p with poorly shot video I can clearly see brush marks, and globs in this paint! A real "professional" would have added Floetrol to the paint.

@jaredwilly1 Жыл бұрын

Sorry for "stretching the truth" I was just guessing at the time. I timed myself and it took me 16 min and 43 seconds to paint a door. The only time I use floetrol is when the paint drags (seems dry) or when I spray with a HVLP sprayer. Most of the paints I use do not need floetrol and especially Urethane or Alkyd paints they run thin. Too much floetrol has a tendency to flatten of dull the paint