R9M & OM626 | How to replace a timing chain

R9M & OM626 | How to replace a timing chain | Wechsel von Steuerkette

Рет қаралды 56,828

4 жыл бұрын

In the video you can see:
- Disassembly of the control cover
- Fixation of the crankshaft by means of special tools
- Disassembly of old control chain incl. chain tensioner
- Replacement of chain guides white old/blue new
- Assembly of new control chain incl. chain tensioner
- Setting of control times with special tool
- Gluing the screw with the Elring thread lock
- Removal of the old silicone sealant
- Application of the Elring silicone sealant - Dirko HT ProfiPress
- Professional installation of a PTFE shaft sealing ring
Im Video sehen Sie:
- Demontage des Steuerdeckels
- Fixierung der Kurbelwelle mittels Spezialwerkzeug
- Demontage alter Steuerkette inkl. Kettenspanner
- Austausch von Kettenführungen weiß alt/blau neu
- Montage neuer Steuerkette inkl. Kettenspanner
- Einstellung von Steuerzeiten mit Spezialwerkzeug
- Einkleben der Schraube mit der Elring-Schraubensicherung
- Entfernen der alten Silikondichtmasse
- Aufbringen der Elring-Silikondichtmasse - Dirko HT ProfiPress
- Fachgerechter Einbau eines PTFE-Wellendichtrings

Пікірлер: 43

@mahmoudmubarak8153 4 жыл бұрын

The best thing I liked is that there is no music with the video, and this makes the video very enjoyable. Thank you for the great channel. I hope to participate in this work with you and more brilliance and continued success. Thank you

@elringdasoriginal 4 жыл бұрын

Hi Mahmoud Mubarak, Thank you for your nice comment. Sometimes people like music with this kind of videos. We are struggling between the both arguments. :) Best regards from Elring Service team

@calexander230 4 жыл бұрын

music make it hard to listen to what he’s doing. keep it as is.

@Daniel-jv5yr Жыл бұрын

What a well done job. Wish I had someone like you in my area to do this

@SuperJonboy92 Жыл бұрын

You shod show timing up the crank to tdc not just screwing the locking tool in any old how, great video non the less 👍🏾

@dodogot5814 4 жыл бұрын

tolles video!

@elringdasoriginal 4 жыл бұрын

Vielen DANK!

@user-tk3ct9jx5r 4 жыл бұрын

Молодец!

@christost7968 Жыл бұрын

I recently replaced the timing kit in a r9m engine. The locking pin for the crankshaft was on the left side, behind the ac compressor. Renault trafic ll 2007 model.

@vandam3829 4 жыл бұрын

New . But he put the old bolt on crankshaft. I like all videos bay the way.

@elringdasoriginal 4 жыл бұрын

He Van Dam, thank you that you like what we do! Using of the old bolt again will be an option - as you mention will be the best way to use a new bolt! ;) Best regards from Elring Service Team

@MecaniculTau 3 жыл бұрын

LIKE 👍👍👍

@sonyhk3824 4 жыл бұрын

Welcome back guys

@elringdasoriginal 4 жыл бұрын

He Sony H K, Thank you! I hope you will enjoy this video series! Best regards from Elring Service Team

@sonyhk3824 4 жыл бұрын

@@elringdasoriginal Very enjoyable n interesting video

@kayeschakel1757 Жыл бұрын

شكرا

@jackmancrazy 4 жыл бұрын

do one for old om606 engines hitting their high mileage timing chain due dates!

@milanvandes. Жыл бұрын

Hello, First of all thanks for the great instruction video. I have one question : are the R9M & OM626 both exactly the same? I am asking this question because my Mercedes needs a new engine and there are not that much offers of a revision OM626 engine. For the R9M there are a lot of offers. As far as I can see it its only the adapter to get the Mercedes automatic transmission fitted that is different then at the R9M engine of Renault. I am looking forward to your answer! Thanks in advance. Greetz

@elringdasoriginal 10 ай бұрын

Hey, they are created in the same platform so the main parts are identical like block / head etc. More details you have to compare by yourself. 😉👍

@user-ho5hv8tx2s 4 жыл бұрын

sehr gut,👍

@elringdasoriginal 4 жыл бұрын

Dankeschön! Beste Grüße vom Elring Service Team

@IC.XC.NI.KA. 3 жыл бұрын

Please, tell me after how many kilometers should this timing chain ever be changed?

@elringdasoriginal 2 жыл бұрын

He, It depends if you recognize noise from the timing chain or in the matter you have to open the engine. Based on the mileage of the car it makes sense to replace timing chain. Your Elring Service Team

@xdygmnyrdf 4 жыл бұрын

this channel is crazy good. i learned to rebuild the whole damn engine by watching you replace gaskets. lol

@elringdasoriginal 4 жыл бұрын

Hello, Thank you very much for your compliment! We are focusing for helpful content on this Channel. Yours Erling Service Team!

@_4matic_ 3 жыл бұрын

What are the consequences if the engine is started earlier than 4 hours?

@Balkanbozz100 7 күн бұрын

how much nm for video 8:44 and 9:23?

@tinker-time 5 ай бұрын

Why dose the cam sporket have slot in it??? And is able to move

@CANERm3 2 ай бұрын

For timing ajustment most European Engine Manifacturer using this System and it requires speciallockingtool. Japanese or Asian uses mostly markings

@user-ul1pf7fh1c Жыл бұрын

Почему очистка крышки цепи и передней стенки блока цилиндров от старого герметика осуществляется после установки новых шестернеи и цепи на мотор???????? Это НЕПРАВИЛЬНО!!!!!!!!!!

@elringdasoriginal 10 ай бұрын

Hey, for cleaning of surfaces there are many ways to go for... 😉👍

@ThePsr1500 3 жыл бұрын

Hallo ist das der r9m Motor vom Renault Trafic 3?

@elringdasoriginal 3 жыл бұрын

Hallo Neptuner, Genau - Dieser Motor ist in verschiedenen Renault Modellen verbaut worden. Beste Grüße Elring Service Team

@ThePsr1500 3 жыл бұрын

@@elringdasoriginal ich frage nur weil ich jetzt vom 2-3 Händler gehört habe dass man nicht genau wissen was drin ist bei mir Steuerkette oder Zahnriemen

@elringdasoriginal 3 жыл бұрын

@@ThePsr1500 Hallo Neptuner, Schau dir den Link mal an: web.tecalliance.net/elring/de/parts/engines/assemblies?targetId=38653&typeNumber=38653#@brc/engsearch:Motoren;engineCode:r9m/assem:RENAULT%2520-%2520R9M%2520415;targetType:engines;targetId:38653;typeNumber:38653

@teknomen5997 5 ай бұрын

Hallo, schöne Arbeit. Wie lautet der genaue Katalog-Produktcode des Silikons, das Sie für die Kettenabdeckung im Video verwendet haben? Ich möchte nicht das falsche Produkt kaufen. Ich konnte das Produkt Dirko S HT ProfiPres auf Ihrer Website nicht finden. Kannst du eine Antwort schreiben?

@elringdasoriginal 5 ай бұрын

Hallo, das Dirko HT Profipress hat die Artikelnummer 471.501. Viel Erfolg bei der Reparatur!

@koffimensah84 Жыл бұрын

S'il vous plaît Bonjour je suis le moteur d'une la le type de moteur que vous avez à combien de mois tu es comme ça

@koffimensah84 Жыл бұрын

Bonjour pardon je suis à lomé Togo

@koffimensah84 Жыл бұрын

Je cherche carter d'huile sous moteur r9m 626

@elringdasoriginal Жыл бұрын

Sorry, we are not offer oilpan for this engine. Your Elring Service Team

@Wabufan 4 жыл бұрын

Sinnlos, es wäre ja zu einfach und zu logisch das Drehmoment anzugeben!

@elringdasoriginal 4 жыл бұрын

Hallo Wabufan, Sinnlos? Nein, wir haben uns schon Gedanken zum Video gemacht. Bei einem Motor der von Renault und Mercedes verwendet wird, gibt es unterschiedlich Werksangaben. Dazu werden DIN Schrauben immer mit einem bekannten Drehmoment angezogen. Um hier keine Diskussionen in die eine oder andere Richtung aufkommen zulassen, haben wir uns wie in allen anderen Videos für KEINE Werte entschieden. Beste Grüße dein Erling Service Team