How is the Emotiva amplifier working out? -Jon

@purplerider Did you end up with the Dr-2?

@@Brandosway yes! I’m pretty happy with my purchase. I have some hivi 3.1a diy speakers and a klipsch 1200 sub. Thing is amazing. I’ve also had it connected to some klipsch R820f towers. Even tho they are very sensitive. They get the most when u put max power to them. I replaced them with those diy speakers. I built them myself and upgraded the crossover to sound more flat. They are 4ohm so they love the power the amp puts out. For a preamp I went simple. With an emotiva basX pt-100. And I have a cheap little fosi audio tube buffer to add some distortion and warmth. I love the way it sounds. I’ve also had it connected to some Bose 301s III. And some cheap little bostons. And other speaker jugs I’ve built. Such as the c-notes, tritrix mtm TL towers, overnight sensations. ( overrated) and some older me woods that were five way speakers. It made all of them sound their best. Even the crappy Kenwoods sounded pretty darn good. Definitely worth the money.

Thanks for the encouragement - glad you enjoyed.-Jon

I appreciate the feedback- glad the content was helpful. -Jon

Thanks - it is good to know I am not alone with my multi-purpose space. -Jon

Keeping the sonic experience high outdoors - nice! -Jon

Thanks for weighing in. This enhancement was the result of several years of planning. Glad you appreciate the look of these stacked up. I have yet to give any thought to room treatment. Using the kids toys, wall-to-wall carpet etc to dampen reflections for now. Any thoughts? -Jon

Adding in some pro gear to enhanced the sound - nice. I will have to look at the BBE sonic maximizer more closely. -Jon

@@ripewave I am adding the Douk Audio T8 HiFi Vacuum Tube 5-band EQ Preamp Equalizer XLR x 2 between my processor and Emotiva XPA-DR3 Differential Reference™ Three-Channel Power Amplifier. Easily the most important amplifier product Emotiva makes is the Differential line. It is needed to power B&W and Polk R700 towers. Most reviewers don't tell you massive differential balanced XLR power is needed for powering these demanding speakers.

The manufacturers don’t either. Polk and many others under state the power requirements. Yes, they will play, but will be constrained. While minimums are fine, they need to up the “recommended” power. Also - you are the second to mention the Douk tube amp. Must be something special about that one. -Jon

Glad you enjoyed this unique approach. Sorry about the editing. For this type of install video I am so anxious to get it up and running, but need to document the process at the same time as a one man operation. I guess that what makes it real. Still I strive to improve. -Jon

@Ripewave Audio ..Absolutely. I do a lot of prep before I start and just stream or record live. Editing itsuch a painful, time-consuming process that I cant afford to do with a fill time job.. and when videos or brands dont pay me anything for my effort. 🙂...Reasons why I appreciate you so much.

Thanks for the encouragement and raising awareness of your own channel. I will be checking it out - just subscribed. Lots of long nights producing the videos - 2nd job for me as well. -Jon

@Ripewave Audio ..We are in service to our passions. :-) Kudos to you! My instagram is far more active than YT.. easier during my spare time. Eventually I'll try to load audio show content. Montreal Audiofest is this coming weekend.!! Very exciting!

Nice!

Interesting concept. I typically reserve recommending bo-amplification for those with two amps that are otherwise underpowered for the speaker and they don’t want to purchase new amps. In this case the XPA-DR-2 is more than capable of handling the full range of the speaker using just one channel. I could try. I just got another DR-2 in to power my front wide speakers. Currently I have two monoblock XPA-1 Gen 2s powering my front Left and Right speakers. I could keep those in place but have them drive just the bass and the DR-2 could handle the upper frequencies. Then I could reverse to see what sounded better vs. the normal pair of monoblocks. -Jon

@@ripewave Jon thank you for your response. I suggest that from one DR2 GEN3 amplifier you power the right channel in such a way that the first channel of the same amp feeds the "HF" and the second channel feeds the "LF" of the same speaker. Connect another set of DR2 GEN3 similarly but to the left channel.

This combination will balance the overall loads on the amplifiers between each other, I mean the DR2 GEN3 of the left channel and the DR2 GEN3 of the right channel. The proposed combination can make a big difference with large speakers using several bass drivers in one column.

Perhaps I will try it both ways and compare. I see you are dedicating one amp to low frequencies and the other to high frequencies. -Jon

@xmj Jon didn't answer you, but that set-up sounded good to me. Did you finally end up with your idea

These are the Polk Audio Lsi15 towers. I purchased in 2006. These has since been replaced by Polk twice as two newer generations have been introduced - the Lsim and Legend series (available now). -Jon

An overpowered amplifier is less likely to damage a speaker then an under powered amplifier. The underpowered amp will go into clipping which will damage the speaker. Klipsch are typically very efficient so you may not need the extra power and less likely to experience clipping. -Jon

@@ripewave thank you for clarifying Jon.

I compare sometimes dissimilar products to determine if there is value to move from say a stereo amp to a mono block approach. -Jon

Sounds like the right thing to do. Thanks for the suggestion.