Ender 3 V3 KE: Setup, Config, Test Print, Timelapse - Creality 3D Printer with Nebula Pad & Camera

No video

Ender 3 V3 KE: Setup, Config, Test Print, Timelapse - Creality 3D Printer with Nebula Pad & Camera

Рет қаралды 12,969

7 ай бұрын

Complete Step-By-Step Setup: Creality Ender 3 V3 KE 3D Printer. Binding to Creality Cloud, Updating The Firmware, Creating a Timelapse, and more.
Get the Ender 3 V3 KE: shrsl.com/4duh2
Help this Channel continue to exist: Use my Links:
Amazon: amzn.to/2miGQq9
Creality: shrsl.com/424l2
Bambu Lab: shrsl.com/46lky
Sovol: sovol3d.com?sca_ref=2756755.r8WNQiJdNf
Sunlu: www.sunlu.com?sca_ref=4022320.F0sV6y4ht9
Send a TIP: Click the "💗THANKS" button, or Venmo.com/gregg-cerenzio
Become a Member, by clicking "JOIN", or this link:
/ @3drundown
Learn with me!
My 3D Printing Udemy Course:
3DRUNDOWN.COM
CURARUNDOWN.COM
BAMBURUNDOWN.COM
Support me via Patreon: patreon.com/3drundown
My "Must Haves" Amazon 3D Printer List: a.co/5RxTkYl
Upgrade your FDM Printers:
Get The Smart Kit Here: amzn.to/328eBDr
Get Cloud box, here: amzn.to/33fePJd
Get a Logitech Webcam Here: amzn.to/3JUpFFI
Get a CR-TOUCH Here: amzn.to/3oWhrnK
Capricorn Boden Tube: amzn.to/3FABHBp
Creality Official Metal Extruder: amzn.to/3JBeguj
Nozzle Cleaning Kit: amzn.to/3JsK307
Razor Tool, for easy Stubborn Print Removal: amzn.to/3pQ7Jnr
Find me on Facebook: / 3drundown
Find me on Instagram: / 3drundown
Find me on Etsy: GAETSY.COM

Пікірлер: 59

@3DRundown 7 ай бұрын

Have I helped you? Help ME continue this channel with some support: TIP: Click the "💗THANKS" button Become a KZfaq Member, by clicking "JOIN" Support my Patreon: patreon.com/3drundown Use my Affiliate Links when Shopping: Amazon Link: amzn.to/2miGQq9 Creality: shrsl.com/424l2 Bambu Lab: shrsl.com/46lky Sovol: sovol3d.com?sca_ref=2756755.r8WNQiJdNf Sunlu: www.sunlu.com?sca_ref=4022320.F0sV6y4ht9 Support me via my Course: 3DRUNDOWN.COM

@leedesigner1977 6 ай бұрын

Thank you, I appreciate this loads. Lee UK

@bg9711 7 ай бұрын

Mines still in mail, can't wait to start throwing packaging to the floor as per your previous vid ;) Very funny and informative

@3DRundown 7 ай бұрын

THIS IS THE WAY! 🔥🔥

@Musiquence 6 ай бұрын

Thanks again. Very much enjoy your way of explaining things! I do believe you have the spool holder the wrong way around, although I don't think it matters much. Looking forward to adding the camera, too. It's just not very well available here in The Netherlands. Will wait for Creality EU stock. It's also nice to see it doesn't make all that much noise (especially compared to my K1 Max).

@3DRundown 6 ай бұрын

I offer you, exhibit A: store.creality.com/products/ender-3-v3-ke-3d-printer

@Musiquence 6 ай бұрын

@@3DRundown well.... no. Please see 3.3 of the user manual. Also, the filament runout sensor would be on the right side. No biggie, but still... :) It's just about the metal thingy being the other way 'round.

@woflxrx 6 ай бұрын

Helpful video. Thank you!

@Blithedale 5 ай бұрын

Thank you! Very comprehensive

@3DRundown 5 ай бұрын

Welcome. 🔥🔥

@DG-yb3ix 11 күн бұрын

Sir, I'm facing "Printer Over run time error " how to fix that error.

@danielsantosgospel 19 күн бұрын

how did you configure the thumbnails in Orca? What image resolution did you use?

@3DRundown 19 күн бұрын

96x96/PNG, 300x300/PNG

@DG-yb3ix 11 күн бұрын

Sir I am facing the error, Printer coordinate over runtime error " How to fix it.

@erinrichards89 17 күн бұрын

I'm running into a problem with the Nebula camera. The printer recognises that it's plugged in, but doesnt show any images on the app. If I connect it directly to my PC it works as a webcam, but on the app all I get is a grey box with endless spinning white circle.

@3DRundown 16 күн бұрын

Have you attempted the firmware update?

@gmummy 6 ай бұрын

Newbie here, my first time ordering filament, any suggestions for printing something similar to a cellphone case which will need some flex but not much. Thanks for everything Jusr assembled the KE thanks to your video

@3DRundown 6 ай бұрын

No PLA is gonna be flexible, but some are certainly stronger than others. For a phone case, TPU may be the way to go

@kiefervandenberg 2 ай бұрын

10:25. Where can I get the lidar, and what is it specifically called/named

@3DRundown 2 ай бұрын

Far as I know, Lidar has not been released for the KE. However, I'll ask Creality

@sci-fimodeler1701 2 ай бұрын

My printer runs great and I have not tried to update the firmware. I have heard of some people updating the firmware and it makes the printer give errors. is this true?

@3DRundown 2 ай бұрын

I've had no issues at all. After the update, run a calibration, before you print.

@MasterScratchhandle 7 ай бұрын

this is crazy got mine yesterday!

@3DRundown 7 ай бұрын

Epic!! Let's goooooooo

@thebigdr 4 ай бұрын

Must have updated firmware? Mine does not have "Camera Site" in the camera settings

@3DRundown 4 ай бұрын

For the KE, go to Creality Cloud and update the firmware, or, can do it from the screen. The SE, is a manual process. I have a video on that

@davidwatkin1484 4 ай бұрын

Thanks for the video. Just assembled mine today and printed the boat. All good...subbed. Will the Creality K1 A1 camera work on the KE?

@3DRundown 4 ай бұрын

No. You should use the Nebula Camera

@brunos1864 3 ай бұрын

Thanks for the video, this is my first printer, I set it up today. Watching your video I became interested in the camera and have already bought one. As for the sensor you mention at the end of the video, does it make quite a difference? Would it be a good buy? What term can I use to search for? A specific model?

@3DRundown 3 ай бұрын

Hey. Welcome. The G-Sensor something you should probably have. You can live without it, but pretty much all the fast Klipper printers utilize one. It's fairly cheap. Check it out here (and find the links to get it, in the desc) kzfaq.info/get/bejne/qbholrplmrCcc5s.html

@lucasrezende7214 Ай бұрын

Mine doesn't have the "Camera site" settings regardless of having the "Enable time-lapse photography" switch on or off, it also doesn't record timelapses at all and I'm losing my mind trying to get it set-up. :/

@3DRundown Ай бұрын

Do you send prints from Creality Print? (I would) Is your nebula firmware up to date?

@lucasrezende7214 Ай бұрын

@@3DRundown Yes to both, actually, downgrading my firmware brought the options back, still I get no timelapses, both printing through LAN via Creality Print or directly from the pad.

@lucasrezende7214 Ай бұрын

@@3DRundown Hey, I think I figured it out! It looks like there's a minimum layer count treshold for timelapses, I was only printing pretty flat stuff, but when I tried printing a taller temperature tower it made a timelapse!

@3DRundown Ай бұрын

I think that's it. It takes allot of pics, to make a timelapse. if the print is super small, it would be like a 2 second timelapse. Also.... Get started with printing from Creality Cloud. So many benefits, and, your timelapses will be there!

@lucasrezende7214 Ай бұрын

@@3DRundown They really should improve the Creality Print + Creality Cloud Integration, make it more seamless, it's so practical to use Creality Print straight through LAN, I don't know how I feel about adding adding a step of uploading my project to Cloud to start printing from there.

@wwecallofduty123 4 ай бұрын

Is it possible to setup the nebula pad with a BTT Manta E3EZ running klipper on an Ender 3?

@3DRundown 4 ай бұрын

I'm nit sure. I would like to think so, but, I don't know.

@BODALLY 6 ай бұрын

Hi mate do u plan on making a video on Cura setup ? or orca ?

@3DRundown 6 ай бұрын

Hi, this is what I have on ORCA so far, but, yes, I will be making more. kzfaq.info/sun/PLWrqQ7NBLxmCdEwQTSINknTe-pGBylrZp&si=o88G-yBEY82Y3-kO

@gurth-quake1627 28 күн бұрын

It's not recognizing a camera is plugged in...

@3DRundown 27 күн бұрын

Nebula?

@thomascorcoran2975 5 ай бұрын

The only print I got to work was the bench test the ke comes with, everything I got off thigiverse fails after a few levels and gets stringy, the printer is just a couple. Days old

@3DRundown 5 ай бұрын

Sounds like you need to work on your slicing methods. Use Orca and watch my Bambu Studio and Orca videos. (They are the same)

@thomascorcoran2975 5 ай бұрын

So I got it working now and it’s printing great, only question I have now is the nebula camera gave me a nice time lapse of a 1.5hr print then I did a 27 minute print and did not get one , is there a certain print you have to meet to get a time lapse

@makervishal1 6 ай бұрын

Mine is restarting during off set calibration, any idea what could be the issue

@3DRundown 6 ай бұрын

Yikes. Something is loose. Get eyes on all the connections. Could be a bad connection at the ceramic heater, which, would mean you need a new one. Check all connections carefully.

@truszko91 6 ай бұрын

I just got it too! Do you know if there is a way to get timelapse videos with the extruder out of the way? I've seen timelapses online where the print is "growing" but the extruder sits in one place. Any idea if that's possible with this setup?

@3DRundown 6 ай бұрын

Yes. I explain it in this video....

@truszko91 6 ай бұрын

@@3DRundownah found it. Thank you!!

@See6- 6 ай бұрын

Is creality print app compatible/recommended for this kind of printer?

@3DRundown 6 ай бұрын

Yes. Creality print works well with the KE. I also recommend learning Orca

@davidcooper574 6 ай бұрын

What slicer are you using?

@3DRundown 6 ай бұрын

Orca

@Almost_Made_It 4 ай бұрын

Total noob. Is the reason we are not printing pre sliced files because we need to customize all the options to suit our printer? Is cura a good slicer to use with this printer or should we use crealitys?

@3DRundown 4 ай бұрын

There are so many hardware and environment variables at play with a model, and, so many different methods and techniques, to print a model. Then there are endless filaments, which behave differently as well. Slicing it yourself, is the way to do it. I like Cura allot, but I would consider learning ORCA for your V3

@Almost_Made_It 4 ай бұрын

@@3DRundown thank you👍

@KGBJester 3 ай бұрын

This a very helpful video. I do have one criticism... I don't know what it is about the man in the video but his eye contact makes me uncomfortable. I really enjoy the style of the host? presenter? Anyway funny guy and very helpful! Just the eye contact though. Very sorry.

@3DRundown 3 ай бұрын

I will continue to stare into your soul. Deal with it.