Ender 3 V3, Unbox, Print & First Impressions

No video

Ender 3 V3, Unbox, Print & First Impressions

Рет қаралды 11,982

Күн бұрын

This is the new CoreXZ 3D printer from Creality, the Ender 3 V3! An amazing machine priced incredibly competitive in the new 3D printer appliance race!
In this video we unbox it, and print something for some upcoming content!
Some of the links shared in our content may contain affiliate or promotional links where we may receive compensation through your use of them. Thank you for supporting our content!
Creality Ender 3 V3
loyal.ms/creality
Polymaker Filament
loyal.ms/polym...
Bowl Model
www.printables...
I am incredibly fortunate to have Polymaker as my official sponsor! Using my affiliate link is a fantastic way to help support our content!
loyal.ms/polym...
Did you know that I am LIVE on Twitch 3x a week (Mon/Wed/Fri @ 5PM Pacific) where we nerd and geek out about 3D printing for HOURS! Oh, and we also have sponsored giveaways EVERY SINGLE SHOW! Come by, say hello, we'd love to see you there.
/ loyalmoses
Also, we have one of the ABSOLUTE BEST 3D printing discords that have ever existed! An incredible, thriving and supporting community with weekly contests and giveaways as well as support channels and so much more! I do most of my announcements there as well, so you'll want to join for sure!
loyal.ms/discord
We have the BEST sponsors for our content, take a look at these amazing companied who regularly sponsor our content here on KZfaq and other platforms!
Bambu Lab
loyal.ms/bambu (aff)
Gloop!
loyal.ms/gloop
Micro Swiss
loyal.ms/micro...
Slice Engineering
loyal.ms/slice (aff)
LDO Motors
loyal.ms/LDO
---
#3DPrinting #Creality #3dprinter

Пікірлер: 74

@anon-means-anon 4 ай бұрын

Creality continuing to hold the title of the worst naming convention ever implemented. There are like 12 ender 3s now and I have no idea what differentiates them or which ones are newer without looking it all up.

@LoyalMoses 4 ай бұрын

I don’t get it either, but they are stuck in my head now!

@dekurvajo 4 ай бұрын

Only 12? I swear i thought they had like 20 :D

@russdesigns 4 ай бұрын

It’s reaching Xbox levels of ridiculousness.

@Pinkman443 2 ай бұрын

Agree

@anthonylong5870 4 ай бұрын

100% Agree on your take of the best 3 Creality printers. Ive got the SE and i cant believe how nice it is for $170....Just a fantastic deal

@LoyalMoses 4 ай бұрын

Great value for their price!

@emmanuelskolinos1361 2 ай бұрын

Love your videos man clean not much talking and you show what you review that's why I follow you

@LoyalMoses 2 ай бұрын

Thank you! 💜

@kreinova2747 3 ай бұрын

your turntable is a 100% freakingly genius moment!

@LoyalMoses 3 ай бұрын

Thanks!

@blueenergizerbunny7734 4 ай бұрын

Wow the assembly was so quick

@LoyalMoses 4 ай бұрын

Crazy quick.

@tmtjg3 4 ай бұрын

Great video. I wonder if Creality left the back of the gantry open like that for maintenance. What was going on with the hot end wobble during assembly?

@LoyalMoses 4 ай бұрын

Likely! Also, haven’t looked into why the hotend was doing that. That will be on my list.

@deecat2018 4 ай бұрын

I think open at the back is fine (easier to maintain than enclosed core xy)and someone gonna make cover that use magnet to quickly take a look when needed

@LoyalMoses 4 ай бұрын

That’s a good point!

@TheBaseUK 3 ай бұрын

Do you like this printer over the KE?

@LoyalMoses 3 ай бұрын

If I HAD to choose, I would likely go with the V3!

@TheBaseUK 3 ай бұрын

@LoyalMoses thank you! Not to push it but any glaring reasons why? I have a KE, but im looking to get a bit of a print studio going at the college i work at, so budget-wise im eyeing up both of these as my main candidates... no worries if you dont feel like elaborating :)

@LoyalMoses 3 ай бұрын

The SE, KE and V3 are all great! For overall user experience only, I would go with the V3. It would just such a good machine, I feel like they did a great job with it. I’d guess it will be around a long time.

@dennisraadschelders6821 2 ай бұрын

For the same price as the V3 you get a KE with 6 kg of filament. I bought the KE. Most bang for the buck and will replace it again in 2 years or so anyway.

@1981AdamGs 3 ай бұрын

I am completely lost on what Creality printer has what features at this point. They really need to let the Ender 3 name die.

@LoyalMoses 3 ай бұрын

Their naming is difficult for sure!

@newtonwolf7185 2 ай бұрын

I had this printer as well and for a while it was fantastic. But after a while it had a hardware malfunction that basically melted half of the printer, and their support team offered little to no support. Before that happened I was in love with the printer

@LoyalMoses 2 ай бұрын

Oh no. Sorry to hear that.

@GabrielPalileo 4 ай бұрын

Looks like a decent machine. I am assuming the Core XZ system is meant to reduce Z banding? Do you think it would be worth it to compare results between this and other printers with Z axis screws?

@LoyalMoses 4 ай бұрын

Absolutely! I want to run the same slice on the SE, KE and V3! Next video!

@ackbarboypratama1277 4 ай бұрын

@@LoyalMoses I'll be waiting 😁

@kreinova2747 3 ай бұрын

@@LoyalMoses please do with CR-10 SE also ! because i'm choosing to upgrade to 3V3 Plus or K1C

@sttal 4 ай бұрын

In the K1 with a similar screen you'd have to do a pretty strong force so it sits correctly. Are you sure that the screen is seated properly?

@LoyalMoses 4 ай бұрын

I believe so, it slots down and doesn’t go any further. If I push harder, afraid I’ll break it.

@sttal 4 ай бұрын

@@LoyalMoses exactly the kind of force that i did on my k1, and k1 max to set the screen in place. Almost all my upper weight on it so it would slot in properly. Still and oversight from Creality IMO but better than a dangling screen. Besides that on K1 series it will colide with the door if not properly seated.

@GDM1787 3 ай бұрын

Great printer!!! I agree with everything you said in the video though…exact same opinions here.

@LoyalMoses 3 ай бұрын

Awesome!

@_Symtech 4 ай бұрын

Hi Mos. Have thought about uploading videos with higher bitrate or higher resolution? The bitrate is too low for showing print results. At least on screens that have higher resolution then 1080p. Also youtube from time to time are lowering quality of 1080p so they can save money on storing bilions of videos. Cheers man!

@LoyalMoses 4 ай бұрын

I can try and under expose the prints to make them a little more clear from now on.

@SpannMagoo 4 ай бұрын

Why was there so much tape on the box? #ziptiesarethenewducttape

@SpannMagoo 4 ай бұрын

Looks like some tuning is needed as well, how changeable are the settings in the slicer?

@LoyalMoses 3 ай бұрын

I saw some cool new advanced reusable and rubber padded zip-ties yesterday!

@ianisgg8604 3 ай бұрын

Hi man, I wanna buy my first 3d printer for helmets props maybe some smaller things idk and I was thinking about the Elegoo neptune 4 plus but now I saw this one and idk which one is better could you please tell me or if you know another one in that price range please let me know because I want to buy it this month, love the content btw

@LoyalMoses 3 ай бұрын

For helmets, Neptune 4 plus would be awesome!

@ianisgg8604 3 ай бұрын

@@LoyalMoses thanks man buying it today

@pablopiron2524 4 ай бұрын

You should make a video about ankermake M5c ;)

@pablopiron2524 4 ай бұрын

I dont see a lot of real pros videos about it just random amatures 3d printers they where sent to…

@LoyalMoses 4 ай бұрын

We have it here, content coming!

@justingraham6602 4 ай бұрын

The CR10 se is also a great printer.

@LoyalMoses 4 ай бұрын

I’ve not used it yet!

@kreinova2747 3 ай бұрын

HI ! Right now i can get 3V3 Plus and K1C at the same price ! which one would you guys suggest should i choose? dillemma right now. I have Cr-10 Se now and want to add one more perfecto printer. 3v3 too small for me. Plus is 55% of volume increase at 33% price increment which i think a sweet deal.

@LoyalMoses 3 ай бұрын

Oh man, that is tough! That V3 is just so nice and convenient, I pick it up and move it around a lot, it's awesome. The K1Cs we are filming with now and they are nice!

@gasparigi 4 ай бұрын

How much time you had for the video? Only one test print 😞? On that object, bad overhangs are on front side, where you have near horizontal surfaces (lines). On the back side, all lines are under some angle (I printed this before). Similar results with other printers too.

@LoyalMoses 4 ай бұрын

It was an unbox and first print video. More to come.

@AroundTampaBay 4 ай бұрын

i been waiting to see if you was gonna get this machine and do a video. if not zip ties then what would you rather see? and omg my name was on the screen. haha.. Thanks for the great video and your opinion is always important. what we do with it is always on us. As much as i wanted to get a bambu sadly couldnt due to that recall and i ended up getting this model and the ke model. Though will be saving for that a1.

@LoyalMoses 4 ай бұрын

Thank you for your support!!! I love better thought out designs and integration over zip ties, just a preference of mine.

@AroundTampaBay 4 ай бұрын

@@LoyalMoses what could we use in place of a ziptie?

@user-uc6tb3gv7d 4 ай бұрын

Mr Moses your up was showing ps just wanna help because u sold me on q1 pro thx love the show

@LoyalMoses 4 ай бұрын

Thanks! It’s okay, just private IP space.

@Apollonius-Au-Raa 4 ай бұрын

I can't figure out how to print CR-PETG on this thing. Other than that it's great, lol.

@LoyalMoses 3 ай бұрын

Can we help?

@DEEZbubblz 4 ай бұрын

Idk if its just me but i hear a ringing in the back of the video

@LoyalMoses 3 ай бұрын

Sorry! Mic picking up a 3D printer in the background.

@dmhayes6 4 ай бұрын

Nice printer, nicer video, nicest shirt

@TinTalon 4 ай бұрын

Seems to be a pretty nice little printer.

@LoyalMoses 4 ай бұрын

I think so too!

@Milkex 4 ай бұрын

throw.it.into.the.Volcanooo!

@LoyalMoses 4 ай бұрын

😆

@aerospaceresearchmeyerton2687 4 ай бұрын

nice video, I own the SE myself. No profiles in other slicers yet. so I made 1 in prusa with the Ender 3 S1 profile. and using the speed settings. works charm. why prusa slicer? snug supports.

@LoyalMoses 4 ай бұрын

PrusaSlicer is really nice!

@anthonylong5870 4 ай бұрын

Theres prifiles for the SE in both Orca and Cura

@itsnoah4276 3 ай бұрын

There is a profile for the SE in cura, that is an amazing slicer

@MrGerhardGrobler 3 ай бұрын

@@itsnoah4276 yes. But no snug supports. I use both CURA and Prusa slicer.

@petercallison5765 4 ай бұрын

The Ender 3 V3 SE is great but this not worth twice the price. I sell 3D printers and I won't sell this for more than a Flashforge 5M. Wait for the price to drop.

@LoyalMoses 3 ай бұрын

Okay.