@Zion Paxton well noticed, noone cares

Great. I tried doing this and the sound of Tony's slow-mo voice summoned a demon who made me a welding rotatory plate. I don't even own a welder!

I just watch them 4 times

I miss his museum work. Does he do those any more?

When he started spelling subscribe :')

Well he still has that phone at least.

And the Oscar goes to.....

@@disarm2k10 I missed it again! 😢

Must not be done too frequently, lest you become branded "TOTaholic"! :o)

@Evi1M4chine I use cheap whisky in my Multiplaz 3500 plasma welder in place of hard to get isopropyl alcohol now the virus is about.

Finally! Someone who knows something about corrosion mechanics.

Wintergatan : maybe ToT viewers are more secure in their masculinity than the average yToober

Man, what are you doing here?

Im subscribes to you Alex, but I just noticed I havent seen a video from you for ages. They dont appear in my feed unlike all the other ones. Fucking hell...

Sausage.

yea :D :D :D he is master of this hidden jokes :D

Never plug your tool in to something that has not been configured properly... If in doubt, stick your toll in a vice (vise) :)

I don't know what was genius about it... it didn't work for me. All I got was smoke and a PC that won't boot! ;o)

@Evi1M4chine : You lost me at Gentoo! :o) (Not sure I want to reverse my G-string anyway.)

The only problem is that after that first play, you've got yet another copy of "The Sounds of Silence".

Try taking a lighter cut? Also, don't use a record with talking on it - waaay too much chatter.

i wonder if you could use a TIG torch to read music from bakelite records

Yep all you need to do is put a sewing needle connected to a cone in the tool post and you could play one, as long as you had an auto crossfeed that matched the spiral size.

Drain the oil out of it if you want "Heavy Metal".

Btw. What about the surface gage project? ;)

I don't know what you're talking about. :)

being an audio tech I always thought Max Headroom was a signal recording reference. I was not surprised to find out how much simpler it was.

Hey! I know Max Headr... oh, crap, I'm over 40 *already*?

30???!!! I'd say no one under 40 knows him!

Justscary lol I'm from Vic Aus dairy part

We can wait 😊.

The only type of procrastination that's approved not only by happy California cows, Wisconsin Dairy Association and the Australian Milk Men's (and Sheilas) gathering for liquid nutrition. Remember Tony Tots, drink milk that's only procrastination approved via This Old Tony. It means that the nutrients got thicker for better bones, hair, teeth and that vip of vim and vigor to be the confident big man or woman on campus.

@@Bl4ckw0lf1 : You only have to look at how healthy Meatball is to know what you say is right! :o)

Milk from smiling cows always tastes better! (You do have KZfaq in the milking shed, don't you?) :o)

*lathe in the game.. sorry I show myself out.

FYI: The giggling never stops.

Hey Hugh, you are sofa king lucky to have the last name Janus, Mike Hunt was jealous, hahaha

My parents Mr. and Mrs. Janus had a weird sense humor...

Out of all the channels I watch TOT's is the one I get the most excited about when I see a new video is out

ha!

Bigclive did do a teardown of a bum electrode that someone sent him once. kzfaq.info/get/bejne/edKDlstk37KnYJ8.html

How else are you going to fix that crack?

Sounds like something Braveheart would use

Especially if they are being provided by "She who must be obeyed"!

I hope you didn't learn it from this video... unless I missed something, drill bit sharpening was not on the agenda today! :o)

Nah. 2x all the way for me. Wish they even had an option for 3x or 4x for Monday-night-meatloaves ;p

1.25-2 depending on the density of content and talking speed. i avg 1.5x tho.

+Jonas The Movie You have to any faster and his voice would just sound like one continuous sound

[ Video Speed Controller ] browser extension/add-on lets you go up to 10x and in 0.1x increments. It also stores your preferred speed (e.g. 2.1x ) and lets you toggle between that and normal speed.

I watch at 2x but I watch it twice because I always miss stuff the first time

I've never seen AvE and ToT in the same room... coincidence?

And if it won't fit just weld it straight to the vise!

I was looking through the comments to see if anyone else caught that. Glad to see I wasn't the only one.

It's a pretty iconic phrase. I'm only 28, but I'm still familiar with it despite never having seen the show.

Well played Sir, well played. 👍

Nice one Jason. You buy that ring yet? ToT could make you one.

To The Top Crane this is a legitimate invitation, no playing comrade.

Dall Tex id prefer to ask Tony to make my wedding band lol call me selfish... but I'll just buy hers.

Glue some Neodymium magnets in your doorstep, and he'll never make in if he's not "clean"! (First check with TOT that Meatball hasn't been put on a non-ferrous diet tho') :o)

thanks ARW!

Amen. I had to explain it to my wife.

"Max Headroom" captain obvious flies away!

actually LOL'ed. this is fantastic.

I learned that in the military.

Dan Harold - yep, and rarely made of PVC, susceptible to heat distortion. Phenolic resin is popular and more stable.

Not that any sane person would want to do the work. But using the original from my delta 14" bandsaw as a pattern I did a green sand casting in aluminum.

I better register that channelname AND webadress.

This Old Tony has shirts?!?!

@Kevin did you just stop wearing it? He hasn't posted in a while and I'm looking for someone to blame.

@@taboc741 😳

I've walked away from the NFL for several years now. It's been wonderful. Just got back from the lake. Had donuts and fed the ducks with my 6 year old. Made memories. Now I'm on the toilet, getting my Tony fix. Best day ever.

Tony won't be taken a knee.

Well, hey there Dall Tex!

Dall Tex why go back to supporting the freaking NFL??? Get closer to family. Explore creative or tried and true ways to bond closer with loved ones. Further develop hobbies. Volunteer to help out disabled war veterans. Anything but the freaking NFL!!!!!

To The Top Crane hey Jimmy!

I'd guess metric. Using Ton/Tonne as an example, a standard goose would be spelt Gos

Depends on the goose, Canadian geese well metric, domestic geese that's determined by your location. Dont forget the blues or grey geese or snow geese. After thought, I guess all geese could be considered trans measure. Side note one of the loudest sounds I've ever heard, a buddy and I were out doing some goose hunting and we had a group of about 5,000 geese come in right on top of us it took them an hour to land, anyway we were laying 10 feet apart from each other and we couldn't yell loud enough to say when. it was deafening. Then some idiot driving around in a truck drove by fired at a stray goose and just like that they were gone we arrived at 4am to set up, it was 5pm ben there all day waiting. Dump ass skyblaster. He wasnt even close enough to hit it.

My question is how loose does the goose have to be before you need to check it with a standard? Side note where does one purchase metric goose standards? Asking for a friend...

me3333 Grab a copy of the Engineers Handbook and have a gander 😀

Lightshow Lyndale well aren’t youuuuuu special.

na, i suck at welding, just quoting AVE, for me it would be "a grinder, new weld, grind, weld, grind , grind, and paint, more paint will make me the welder I aint

@@mr.h3377 Well all I can say is you've never used a plasma welder if you suck at stick welding......with plasma you never get a bad weld ....ever......makes a gentleman out of a bum.

add that to youtubes list of malicious, arrogant and unforgivable crimes!!!!! The Sleezy Con Valley Traitors!!! Dawid Kellerman

Tempted to reply regarding youtube / google but I'll get all my accounts suspended and the FBI contacting authorities in my country. Its a hard life if your are not politically correct and also need/want to use content undisturbed.. Soo you keep your fingers from typing anything non PC compliant.

That was after his 99th cup too

I bet he was testing that espresso pot he made

Thanks Samuel!