Loving your from-the-ground-up approach: great for learning how actually to build on the Pi. Hope you’ll make this a series.
@PR0MINENCE9 ай бұрын
Great video! Just a small comment - It doesn’t matter where you put the resistor. It can be either on negative or positive side of the LED. It will still limit the current that goes through.
@markharrisllb2 жыл бұрын
This is the first video I’ve seen of yours but it’s certainly not the last. Everything explained thorough but succinctly without any waffle.
@EngineerMan2 жыл бұрын
Glad it helped :)
@sasakanjuh76605 жыл бұрын
Definitely more RP videos! Or even some basic electronics could be interesting :)
@smmextraYT3 жыл бұрын
Great instructional video! I've watch many videos on very similar functions, but the way you explain each function, while showing the dual view (well, tri-view), made each step easy to follow. You've taken the fear out of programming. Thank you and keep it up!
@EngineerMan3 жыл бұрын
Thanks!
@capistor15 жыл бұрын
Eyyy loved the video. Please continue and make this a series
@reinaldonovoa4 жыл бұрын
Most clear coding example I've seen for the RPi. Definitely more RPi videos please I recently fell into the RPi rabbit hole.
@brandonbrand23384 жыл бұрын
This was brilliant E-Man, thank you. Looking forward to much more raspberry pi videos especially when coding using Python and the RPi's GPIO pins. I simply love tinkering with these SBC.
@beron_the_colossus5 жыл бұрын
Thank you, always love videos about Raspberries
@gsansoucie4 жыл бұрын
Excellent hello world here. I’ve done Pic and Arduino now for decades, just got a Pi, just needed this to figure out where to start.
@timstraps5 жыл бұрын
I was going to do a RPi project this summer that involves 7-segment displays. These are really helpful, hope you do more.
@tburda8234 жыл бұрын
Setting up a circuit to add to outdoor motion lights when one catches motion, it turns them all on. This was a perfect tutorial to get the basics I needed of using GPIO to detect input. Thanks.
@janism945 жыл бұрын
R Pi uses round the house would be a good vid
@leanobajio5 жыл бұрын
Awesome video. I'd love to see more Arduino and Raspberry Pi projects in the future.
@skeeveskeeve5 жыл бұрын
agreed
@JosueRodriguez085 жыл бұрын
Nooooo, look for that in another channel, don't transform this in more of the same shit
@FatPinkSlug5 жыл бұрын
One thing that I would be interested to see is actually a step further towards the "basics" and have demonstrate how to launch code on a PI. That, but also I would be super interested to see about things that you can do with a RaspberryPi that you can't do with something like an Arduino.
@noweare15 жыл бұрын
Since the PI has an operating system the Arduino is better for processing sensors and in general interfaceing with the environment. The PI has a bunch of stuff to do so it only gives the Arduino a piece of time to do it's thing. If you want to control something use an Arduino. Anything with an O.S. will be slow, slow, slow.
@ShizzleMyChizzle3 жыл бұрын
I like your videos before watching them
@bullium5 жыл бұрын
Would love you to continue this series for sure my man!
@str0g5 жыл бұрын
hope that this becomes a series! keep up the great work...
@stevewlasichuk5 жыл бұрын
This was super useful as someone that knows how to program + a little circuit knowledge. If you do more like this, hooking up a motor to a similar event would be cool.
@carpandrei74935 жыл бұрын
You just gave me one more reason to start learning Python. Especially since I already have two Raspberry PIs that I switch back and forth between different projects (mainly retro gaming, music and video streaming).
@hectoro51444 жыл бұрын
Whats up man, I like this raspberry video, thank you so much!
@ThesexyMrX4 жыл бұрын
Fuck.. now I need a breadboard.. seriously I've been to microcenter so many times this week! Thanks for the video
@johnbarrios45312 жыл бұрын
Clarified the BCM and Board setting...had me for a day trying to figure if the outputs were set right in the program..
@CarinoGamingStudio3 жыл бұрын
i subscribe because this channel can teach me on raspberry pi as what it was.
@ashwoodson16495 жыл бұрын
First time I've seen (what seems obvious) the use of an ide cable with a pi... Nice! And Clean!
@yuvigerstein5 жыл бұрын
That's a great tutorial, thank you. Please make more on this exact topic and more advanced physical projects. Thanks!
@lefabb5 жыл бұрын
Great video, I learned a lot thanks to you. I love the RPi and look forward to seeing the next videos you make about it. Cheers
@Alpha_fitz2 жыл бұрын
Do an apdated version of this.
@TheGreatWolf135 жыл бұрын
Only recently started with a RaspberryPi Zero, so would love to see more videos.
@donmiller5049 ай бұрын
Thank You, I'm trying to learn this!
@LerrySanders5 жыл бұрын
I do not believe it matters which side you put the resistor on a LED
@jhoughjr15 жыл бұрын
Taylor Hardin it doesnt.
@JosueRodriguez085 жыл бұрын
It does, for security reasons :v
@jhoughjr15 жыл бұрын
Josue Rodriguez no it doesnt. prove otherwise.
@EngineerMan5 жыл бұрын
You're both right, it doesn't. The selection of that side was to guarantee lower current in the event of a mistake hooking it up,
@jhoughjr15 жыл бұрын
Engineer Man how does that work though? A series circuit would have the same current regardless of where the resistor is. A hookup error doesn’t seem to change the circuit topology.
@dvn8ter5 жыл бұрын
man great video! keep it up PLEASE!
@alvfig5 жыл бұрын
I'd like to see more videos like this one, too. Thank You!
@ImARichard5 жыл бұрын
More raspberry pie stuff would be awesome to see!
@nkeirujohnson-achilike60203 жыл бұрын
Extremely helpful video
@ericr54815 жыл бұрын
This is sweet. Especially love that the code is in python. Please make more.
@andrewpaige91523 жыл бұрын
Your the best, im new to this and was understanderbly clear, cheers from down under Australia, can you maybe do tutorials using all the gadgets? How to go to install programs for your shields and install things through terminal onto Raspian so many people just assume because you have a Pi your and expert, but im just making the change over and people can be so arogant i cant see why people give up and run back to windows and never look back and hate the linux community or open source community. But you were very good going step by step and explaining why each step is like it and what piece does what and why this command command does that and if if you dont sceanario. New Subscriber
@fuzzylon4 жыл бұрын
This video is exactly what I was looking for. Thanks.
@kwkspectre4 жыл бұрын
Very helpful video - I'd like to see more.
@jeffsirkis25525 жыл бұрын
Would like more raspberry pi videos. Thanks!
@daowiz0013 жыл бұрын
Super good! please more!
@Soljarag53 жыл бұрын
Perfect tutorial to get started with gpio!! Thanks
@assida1435 жыл бұрын
Can you do some on OS Raspberry Pi cluster moving ICE is simple and easy cluster and thank you
@JosueRodriguez085 жыл бұрын
I have a 15 nodes RaspberryPi Cluster for virtualization
@fernandoflores37284 жыл бұрын
Good and complete video about RP GPIO manage, hope you may make a video using RP with hardware interrupts like we can make with microprocessors (INT), thanks!
@BillYovino2 жыл бұрын
How would I simulate a button press from another Pi? In other words, taking your example in this video, instead of having the physical button you had jumpers from another Pi. How would you define the GPIO pins in software for both Pi's? My idea is to use a WiFi enabled Pico W to trigger a button press on a 3B+ running Fruitbox (Jukebox software). I would then be able to use my phone's browser to control some aspects of it.
@FPS-WIFI5 жыл бұрын
Great video, and a raspberry pi series would be awesome!
@devnull085 жыл бұрын
Great intro, can you possibly do something with reading data from an input such as a temperature sensor, movement detector etc?
@csebastian33 жыл бұрын
Great introduction!
@Solcitse5 жыл бұрын
thanks for the videos bro, looking forward to more pi gpio tutorials
@RobsPlaceFL4 жыл бұрын
Keep them coming! Worked with Pic Micro and Arduino but just getting into Pi. Where did you write the code and where did you execute it?
@mohammadrezasabouri68755 жыл бұрын
Extremely helpful, I got all the information I needed, thank you so much!
@oswaldjh5 жыл бұрын
Random pixelization at the top side of your PiJuice makes it appear to letting out the magic smoke.
@IcculusTheProphet5 жыл бұрын
Great video! I would like to see more RPi projects. This was a great warm-up to show how simple and powerful an RPi can be with just a little coding experience. I always thought a gun RPi project would be modifying an old garage door opener to a "smart" garage for opener with a RPi Zero. What do you think?
@caleb87645 жыл бұрын
So good mate, keep the Raspberrypi vids coming I say!
@yannnique173 жыл бұрын
What if it's not blinking? I can't measure voltage at the GPIO.
@Mcfryguy55555 жыл бұрын
Yes, do some more Raspberry Pi videos!
@davidb.59113 жыл бұрын
Thank you, very useful video!
@artlessroger1973 жыл бұрын
are the pins the holes on the pcb or is it the little metal prongs that go through the holes? Also can you solder wires to get info/energy from the holes?
@stacyblaustein12285 жыл бұрын
More pie please.
@BrotherHank5 жыл бұрын
More Raspberry PI Videos please!
@angelbythewings2 жыл бұрын
This was awesome manx
@BloodmansCrypt4 жыл бұрын
Loved the video!
@davidwplummer9535 жыл бұрын
Great intro - now how do I do it in C? I assume it's trivial, but could use a simple example like you've done here for python!
@AtoZProgrammingTutorials5 жыл бұрын
Look into the WiringPi or BCM2835 libraries, for extra points you can control the pins directly by using Linux kernel functions.
@Compuscience-Python-Prog-Exps11 ай бұрын
I soo Love my Raspberry Pi 4b.💙
@yassinemessaoudi5 жыл бұрын
Great Video
@FEBIHKING5 жыл бұрын
Superb.... Please do more raspberry pi video's
@vilks_jan5 жыл бұрын
Thanks Engineering Man!
@wedemier5 жыл бұрын
Awesome video! More please.
@kbaeksu3 жыл бұрын
Really nice video, Questions, I'd like to connect to Pi & run python remotely, what kind of editor you recommend for Python (Windows app?)? I saw you mounted some drive or network drive, can you explain what working environment you have?
@sndgx1005 жыл бұрын
Thank you! More please!
@evertidema33385 жыл бұрын
Great video, would love to see some python pi and sensor stuff
@varunrajput2675 жыл бұрын
Please more pi videos!
@balatcode4 жыл бұрын
How to use multiplexed GPIO pins? I can't use that pin????
@CarinoGamingStudio3 жыл бұрын
how about clustering raspberry using pins to connect each raspberry.
@jasonstation11 ай бұрын
Is it in any way possible to utilise the GPIO pins of a Raspberry Pi that is running a Home Assistant instance? IE to connect to the sensors of an old home alarm system.
@thijsdebont4 жыл бұрын
Cool vid! Quick question. Could you use a variable, like the led_on variable, to set the GPIO state instead of GPIO.HIGH/LOW? This would eliminate the need for the if..else statement in the switch function (I could test this myself, but others might be interested).
@VE3RGO5 жыл бұрын
Keep showing the RPi stuff!
@logiztv49862 жыл бұрын
Can‘t you change the voltage of the gpio output ?
@maxmillionnunez3 жыл бұрын
Do you have a script when the button is pressed it calls not for an LED but rather a shell script/file? Is the ‘callback’ would be the call for my script.
@HEX1337x Жыл бұрын
How are called this pins? I want to buy on ebay, i need it exactly this what are, the basic M/M pins?
@pawebaran36012 жыл бұрын
Hey, I plan to use Raspberry as a NAS using OpenMediaVault and I want it to act as a microcontroller to control some of my projects (on Arduino at this point, but my goal is to control them through PI's GPIO pins). How can I achieve both of those goals? Open Media Vault works in headless mode, no monitor and gui, everything controlled from other PC connected to the same network. Do you have any clues? Controlling GPIO in headless mode similar to microcontroller like Arduino or menaging Open Media Vault in normal Raspbian or something
@Jamison_IO5 жыл бұрын
Awesome video. This is a great channel.
@Asithan4763 жыл бұрын
Does the resistor have to be on the positive side coming in?
@t16bros964 жыл бұрын
I’m yet to find a decent button which one did you use
@gingsSon3 жыл бұрын
Thanks.
@wiiu76403 жыл бұрын
How would you convert an audio file into dsd to be played back through the PWM methods in this video? PDM is basically the same as PWM but instead of modulating the pulsewidth via time, it’s by keeping it on or off over clock cycles at a really high clock speed. All you would need is a capacitor to filter the high end. Would it be possible to use all the GPIO pins to output this kind of signal?
@zren45854 жыл бұрын
thank you its really helpful
@ankitmourya90704 жыл бұрын
Nice explanation.keep it up
@robertdavis55694 жыл бұрын
Super new to raspberry and arduino. Which IDE are you using?
@siddharthdedhia114 жыл бұрын
Are the GPIOs same for raspberry pi 3 and 4?
@bigflamehd98273 жыл бұрын
I cant stop my program help😂
@blenzangel064 жыл бұрын
I would like to correct you at 830 approx. you state that GPIO23 has no value or arbitrary value, BUT in the industry we refer to these open pins as floating.
@Manfrix8883 жыл бұрын
hi man, i must do the same thing using forth, any tips?
@masehacker4 жыл бұрын
I am in need of some coding help, I want time.sleeep(X) and I need X to be taken from another file. I am then going to have that file IE: input.txt have its values inside change from a php script\website. no one has been able to tell me how to do this.
@skeeveskeeve5 жыл бұрын
super helpful
@mikebailey29705 жыл бұрын
Yum, more Pi please 8-) Or perhaps micropython on the ESP8266
@jhoughjr15 жыл бұрын
Anyone got epoll to work with Buster? i use JS and seems its borked.
@imnofly13464 жыл бұрын
Cant install the library
@anoniem0123 жыл бұрын
Herooo, may Allah Bless you with Islaam! I have subscribed.