First start of a roughly about 50 years old Cox engine.
Пікірлер: 108
@denuijs Жыл бұрын
Why adding fuel first and the prop after? Pretty dumb!
@EnginePoweredArt Жыл бұрын
I was as excited as a hunter before his first shot who forgot to load his rifle first
@AdventuresOutdoors10 ай бұрын
There is always someone who nit picks and critiques... looks like your him. Dude just relax and if you don't like it just walk away or laugh. Don't play the know it all!
@michaelnelson91408 ай бұрын
And it’s not the correct prop.🤪
@afrog26667 ай бұрын
Well hello there Mr. positive lol
@afrog26667 ай бұрын
@@michaelnelson9140 I ran a variety of props on my Cox`s, depending on Nitro, temperature and what glow head I had on, worked just fine no worries ;)
@frankcastle52943 ай бұрын
OMG reminds me when I was 8....around 1962...and spending hours trying to start the freaking 049 WenMac on my little tether plane. Nerve wracking as hell.
@EnginePoweredArt3 ай бұрын
Yes, I also needed a lot of patience when, at the age of about 12, I started getting these stubborn Cox motors running. And it took me a really long time to get the hang of it. I still love these engines because you have to act like a tamer 😃
@frankcastle52943 ай бұрын
@@EnginePoweredArt Sir you nailed it. Got a big plastic tether plane for Christmas one year which was a huge deal for me and my parents as we were very poor. Had 6 volt dry cell battery that you wired to the glow plug in hopes of starting the motor. Think mime was a Wen Mac but know it was 049. Would take me hours of trying to light it up for a 2 minute, at best, flight around the back yard. Still have my orange 65 Mustang tether car with basically the same tiny motor in it. Thanks for the great vid. Regards, John
@frankcastle52942 ай бұрын
@@EnginePoweredArt Well said Ronald and now and again it's a bit of a small struggle...but I try and do that every single day of my life. Regards, Frank
@Workerbee-zy5nx3 ай бұрын
The box it comes in is valuable, total collectors piece.😎👍👍
@edisonschrader4046Ай бұрын
Trying to get me out of my shell my dad spent a lot of time with me building balsa wood free flight planes using the "black window" engine. brings back memories. Thank you.
@grumpy3543Ай бұрын
Man does that take me back. Thanks.
@TJ-USMC8 ай бұрын
Brings back Great Memories of Flying U-Control Airplanes in the 70's - Thank-you !!!
@markrusk28704 ай бұрын
Man you are brave to hold in you hand
@garygullikson634926 күн бұрын
Extremely stupid, engine gets hot and slippery, vibrates hard , easy to lose grip and motor takes off hurting the jerk or slack-jawed on-lookers.
@thomasmoje5926 Жыл бұрын
Have one of these stashed away in an attic..purchased it many years ago mounted it to a home-built balsa U-control model airplane it is a real screamer once running and tuned right.
@TalkingGIJoe3 ай бұрын
the smell of that glo-fuel will bring you right back to your childhood!
@ronaldschlecker55323 ай бұрын
Yes, the memories come back every time😂
@user-kj1od5ed7p4 ай бұрын
I remember closing the needle and opening the needle exactly 4 1/2 turns
@steveperry13449 ай бұрын
i had several of these when i was a boy in the early 60's and different sizes that i put on model flying planes. i never started one in my hand like that back then but i might try it now that i'm a grownup, an old grownup.
@Tomc52811 ай бұрын
This was my favorite little motor with my sterling Stunt man back around 1973 74
@bliglum2 жыл бұрын
Had one of these on an RC plane as a kid! Pump out a lot of power for their size/weight. But they sure do make a mess!
@abdulrahmanshaikh9202 Жыл бұрын
I respect the patience of the man
@davidrivero79438 ай бұрын
It's what we had & it was fun ...kinda .Now I remember why I went Electric .
@robertfos13028 ай бұрын
Mount it on a board for safety.
@user-lh1il1ul1u2 ай бұрын
As a kid 1960-70 i built my control line planes, engines .010-.035 Fox and Cox engines, in Memphis Balsa wood hand made Many models. My young life, wish i could go back…..
@EnginePoweredArt2 ай бұрын
It's crazy how fast time flies
@wallywally82823 ай бұрын
That’s how I remember them, bastards to start😂😂
@ronaldschlecker55323 ай бұрын
😂
@frankcastle52943 ай бұрын
My tether plane and tether Mustang were bitches to start as well. Especially when I was 10 years old and no idea WTH I was doing.
@keithfreeman52049 ай бұрын
I build and fly a small 24" WS, Planes. 2 channel .049 & .051 Cox engines, 6x3 & 6x4 props Ail & Elv. Yank and bank at it's best. Can fly all afternoon on less than a Quart of Fuel. Regular flight. Climb out from Hand Launch, 4-5 minutes flying around the field at low altitude, last 90 seconds of fuel, Climb, as high as you are comfortable with, fuel runs out, engine Off. Now, on your way down loops, rolls and wing overs are possible, then land are your feet.The planes are based on the Ridge Runt 30-35 years ago. Simple Build-up wing, ribs and spar, Fuselage just flat sheet Balsa, Flat sheet Tail parts. S Cox .049 engines come with a fuel tank, for the Tee Dee engines I use a 1 ounce Fuel tank mounted internally.
@michaelnelson91408 ай бұрын
I still have one.
@xpump87610 ай бұрын
Lucky that sucker didn't pull your arm outa its socket!
@collinmccallum Жыл бұрын
awesome!
@ef-tech45452 жыл бұрын
Cool:)
@loseswag7 ай бұрын
nice
@bkennb Жыл бұрын
I just got one of these. What is the tube on the bottom of the fuel tank? Thanks for the video.
@EnginePoweredArt Жыл бұрын
This is an aerobatic tank with tank ventilation. The two pipes each reach just below the innerside of the tank. As a result, no fuel can escape even when flying inverted.
@automan1223 Жыл бұрын
We used to make our own fuel because the nitro got too expensive. Great line control days at age 11... First time you hear one fire up you will never forget it. ! Does that nylon prop have enough weight to carry the inertia ? We used wood props that would fly everywhere when you messed up..
@scrappysgarage740410 ай бұрын
Mind if I ask what fuel you used? I got one of these and would love to at all costs not use online shopping because that's the only place I can get it at unfortunately.
@automan122310 ай бұрын
try castor oil with 90+% rubbing alcohol. I forget the ratios. You could probably drop some high test gasoline in there to make the cold starts warm up faster. I remember the home made brew did not run as well when the engines were cold. so we used the high $ nitro on the first run. then switched over to the home brew. although the gasoline might be really harsh on any model parts... advise caution.. maybe a test bench first. @@scrappysgarage7404
@vumba13319 ай бұрын
@@scrappysgarage7404They like like about 10% nitro in their fuel, when I flew them in the late 60s we used to use 80 methanol to 20 castor fuel that we flew in our 35 sized engine, put 900 ml (cc) in a bottle and top it up with 100 ml of nitro to make 1,000 ml (1 litre) of fuel. Performed well with that brew in terms of starting, power and tuning, however, they will really start to scream with 20% to 30% nitro, good for competition aircraft but a bit much for us in those days. Hope that helps, have fun.
@darlenealvarado3 жыл бұрын
What fuel do those cox engines use
@EnginePoweredArt3 жыл бұрын
Fuel with 25% nitromethane for 2 stroke glow igniter
@randomscience4k10 ай бұрын
Can we use it with methanol and castor oil mix only without nitromethane? Or what about Diesel oil? I remember seeing someone on youtube run one of these engines with Diesel i think I saw.
@EnginePoweredArt10 ай бұрын
Nitromethane is not necessary but Diesel doesn't work at all
@randomscience4k10 ай бұрын
@@EnginePoweredArt Thank you for the reply. Nitro fuel is quite expensive in my country, but I do have access to lot of methanol and castor oil for cheap though. I've a few bigger Nitro engines in my collection. I had a feeling diesel wouldn't work on these tiny engines, but I've never had one. That idea came from this video 😁 kzfaq.info/get/bejne/edFkoax1m5fWo6M.html&si=jCTrGA-B7FS5Znu3
@Hotvolker10011 ай бұрын
Ich weiß nicht, aber ich hätte den Cox motor an einen Halter montiert. Das hätte die Arbeit erleichtert. Trotzdem ein Like.
@EnginePoweredArt11 ай бұрын
Danke
@chuckaddison51345 ай бұрын
Guess it says something that an item is 50 years old, never opened and has no collector value
@joefish6091 Жыл бұрын
Toyan FS-S100GA
@becksbikes5875 Жыл бұрын
How many turns out should I start with on the needle
@EnginePoweredArt Жыл бұрын
With a new Cox engine, the needle has to be opened up to 3 or 4 turns because the mixture has to be very rich. After a few minutes you can set the engine into lean operation by adjusting the setting to around 2.5 revs.
@becksbikes5875 Жыл бұрын
@@EnginePoweredArt thanks so much I found step dads old cox airplane and helicopter
@nahtpd Жыл бұрын
Always had the best luck with three to four turns out
@user-kj1od5ed7p4 ай бұрын
4.5 turns exactly
@pawel8299 Жыл бұрын
Hello, what kind of fuel does this engine need?
@EnginePoweredArt Жыл бұрын
65% methanol, 15% nitromethane and 20% castor oil
@pawel8299 Жыл бұрын
@@EnginePoweredArt Castrol oil-auto oil e.g. 5w 40?
@EnginePoweredArt Жыл бұрын
@@pawel8299 Maybe you can use Castrol, but actually it should be castor oil. Note the small difference not only in the spelling😄
@pawel8299 Жыл бұрын
@@EnginePoweredArt Ah, now I noticed, thanks😂
@joelylanan452 жыл бұрын
Can we use unleaded gasoline for this engine? Where was that clip attached?
@EnginePoweredArt2 жыл бұрын
Of course it is unleaded fuel made from methanol and nitromethane. This file is not attached anywhere except in KZfaq itself
@ericanderson2482 Жыл бұрын
@@EnginePoweredArt My recollection is that the fuel also contained lubricant for the engine. Castor Oil as I recall but it has been many years.
@EnginePoweredArt Жыл бұрын
@@ericanderson2482 Yes, that's how it was👍
@ericanderson2482 Жыл бұрын
Still have a kit that I got to replace my first .049 combat plane. A carl Goldberg Lil Satan model.
@jefferythum9445 Жыл бұрын
Can I use a 9 volt battery to start the glow plug?
@EnginePoweredArt Жыл бұрын
Don't do that! The glow plug would burn up immediately
@montylc2001 Жыл бұрын
NO!!! 1.5 D battery!
@jefferythum9445 Жыл бұрын
@monty crawford I saw a double d battery setup for sale on line Amazon I think would that work?it said field satrter.
@montylc2001 Жыл бұрын
@@jefferythum9445 yes double D batteries for a .049 glow plug, 4 D's for bigger engines. Just make sure the batteries are in parallel and not series...in other words parallel would be all the pluses tied together on one wire and the negatives all on one. Don't stack them on top of each other, that would be in series.
@jefferythum9445 Жыл бұрын
@monty crawford the motor is a bee nitro 325 I believe this is the second glow plug that burned out.i want to put it in a er coupe do you think that will work wingspan 36"?
@user-kj1od5ed7p4 ай бұрын
1.5 volts Max
@user-kj1od5ed7p4 ай бұрын
Methanol nitromethane and castor oil
@NZHorizones Жыл бұрын
He's done that before.
@EnginePoweredArt Жыл бұрын
Who?
@NZHorizones Жыл бұрын
@@EnginePoweredArt The man who has started this engine. :D
@shaquedelilicss78492 жыл бұрын
So it is an glow engine and not a diesel engine .
@vanpenguin22 Жыл бұрын
Well, It's "compression ignition " Just saying 😌
@user-dh9om1ry8fАй бұрын
Je ne l’aurais même pas sorti de sa boîte. 😢
@EnginePoweredArtАй бұрын
Oui, il aurait dû être conservé dans son emballage d'origine pour la postérité : )
@kjm-ch7jcАй бұрын
Why are there no comments? Those shaky hands don't give confidence.
@EnginePoweredArtАй бұрын
Why are comments disabled on your channel? You're probably afraid that one of your few subscribers will post similar nonsense in your videos🤣
@aaaaahahahaha82 Жыл бұрын
Where do you find fuel for cox engines? I want something that's >25% nitro and has the right combination of fuel types, but it's close to impossible to find.
@EnginePoweredArt Жыл бұрын
In my area there are still various model shops that sell fuel. In times of electric model making, it is becoming increasingly difficult to get fuel. However, in my experience, all cox engines already run with 5 to 10% nitromethane
@matthewmutz93379 ай бұрын
K&B 1000
@sergiob99102 жыл бұрын
Unsafe starting....!!!
@EnginePoweredArt2 жыл бұрын
but all went well
@michpatriot9097 Жыл бұрын
He'd have a kitten if he saw the flying rag!
@clivevreeswijk45554 ай бұрын
This guy is plainly stupid for doing this, a piece of wood, 4 screws is not a hard thing to do. On another note there where many variances of the venerable 0.49, there were single and dual transfer port cylinders, smaller and larger tanks, no tank, and if you looked carefully higher compression heads... It would be interesting to see a series breakdown. My favorite combination (go figure) dual transfer port, high compression head external tank, 25 %nitro.
@lachlangreen838910 ай бұрын
Old and shaky Lol
@FarValley2 ай бұрын
Very unsafe, and you set a very poor example for others. Nice to see you still have all your fingers though.
@rudyho37906 ай бұрын
yeh...user guide in package....this joker doesn't read/use them🤔
@EnginePoweredArt6 ай бұрын
There was no instruction manual. I assume the paper louse had enough time to eat them up within about 50 years
@mj674911 ай бұрын
I've seen grass grow quicker
@Tomc52811 ай бұрын
Then go watch it if that's yours mentality
@cliffcorbitt9494 Жыл бұрын
Is the tank the only thing why its now called somthing else? 049 still, but on like a pt19 cruiser like i have or what? That comes with the original 049 stock.
@EnginePoweredArt Жыл бұрын
I think the reason for the name Black Widow is the color design. The engine is black and red like this spider
@ernestgalvan903710 ай бұрын
@@EnginePoweredArt..the ‘Black Widow’ was a tighter-tolerance, higher compression, higher-RPM, higher-power engine. The porting was optimized for more power. It was a screamer, both in sound, and in performance. In the early 70s, I put this on a ‘Combat Kitten’ balsa combat, and I had many many enjoyable flights with it. Inner/outer loops, inverted flight, wing-overs…. Yeah, I enjoyed it. Moved up to a F109 version of the Midwest ‘Magician’ profile line, with an Enya .035. More joy. Sadly, I allowed ‘life’ to interfere. (the ‘Combat Kitten’ was the .049/.051 version of the .035 ‘Combat Cat’.. made by Midwest??? Memory fails.)