I will wait for you my friend!! 😄😁

Thank you Chris!

Did you buy? How did you find it after a year?

​@@adampell1607 Nope, did not buy it in the end. I found a local shop with a good discount on a foldable electric bike, so I just went straight with it!

Thank you mate.. 👍

😄😁 Thank you mate..

Muito bom

Me too..

Hi George... i don't know.. sorry friend..

Hi, which bmx handlebars did you get and how long did it take to transfer all the wires and buttons?

Oi, como está a bike ??? Apresentou defeitos ??? Obrigado

I eventually sold it, but I didn't have any problems with it. My biggest problem was being afraid someone would steal it and trying to figure out how to lock it up. haha @@tricolor6184

Hello. I just saw this now. I just got generic bmx bars, and it was very simple to move over the wires. You don't need to unplug anything. @@erikthiessen4449

Hi Trevor.. unfortunately..

Mine is also in waiting of order I don't have soldering equipment etc :(

​@@ghilmandilshad9495... você gostou da bike ??? Apresentou defeitos ???

@@tricolor6184 English please

@@tricolor6184 English Please

Oi... qual a sua avaliação sobre as BIKES ???

@@tricolor6184 I drove about 2000km and it is running fine without any problem.

Hi... two batteries with same BMS is not recommended, just find second SAME PORT BMS and connect it in parallel, NOTE, connect them when they are at same voltages -+2V

I fitted rubber mud flaps for the same reason and a piece of DPC under the crank and up to and over the key using zip ties ..no more water or mud issues ..sorted ( and clean shoes

Hi Steth, Only thing you will needed to change is brake calipers and disk brakes..

@@EVCustoms Actually the pro version comes with good hydraulic brakes.

Change the flywheel to an 11 spoke for final gear. Otherwise you'll be peddling like a hamster beyond 20mph with no resistance as OEM is 14 sprockets. The cable operated hydraulic calipers are a cheap enough improvement over the OEM ones..

Hello my friend..can you write me time of the video point?

@@EVCustoms 3.02

Unfortunately i never had ADO Ebike..

No is not written in the manuals, i will try to find some time to make one video about that..

Your instructions didn't work for my bike. Did you have that video?

I have Engwe engine pro and it only has an 18A controller X055-AB002.

I've just had my 7th email from Engwe about a fault with mine. I asked in every email where I can buy parts for replacing what is broken, never got an answer, also they told me the error code I get doesn't exist so I sent them a video, then they said they have no idea what it is. They ended by telling me to take it to a maintenence centre, but they don't know where that might be. Useless. YT is yoour support with this bike. Oh, support@ email didn't even reply, service@ was the one that did not that it helped.

Hi man.. lets try to troubleshoot it here 😄, i am not from support team of the Engwe, but because this channel have to do with repairs we must solve this issue. lets start it here in the comments first by single steps, and if we will need to go deeper i will make WhatsApp or Telegram group for everyone.

Hi.. 720$ used or new?

Gostou da BIKE ???

Hi Ramsey.. smaller..? are you sure about that? if yes you must find way to cool down your contriller..

@@EVCustoms yeah mine is tiny, yours was alot longer.

Hi friend and thank you. At full charge it must showing 54.7 Volts, most probably tour battery must be little a bit unbalanced.. make more frequent charges, for example at 80-90% plug it in charge.

@@EVCustoms Thank you sir for reply... i do delivery jobs and every day i charge it fully from 1 bar - almost empty and every time it shows same 53.1v... i think maybe my unimeter is some low budget Chinese model maybe wrong reading or i really have some unbalanced cells 🤔one more thing when i charge it i always disconnect charger as soon as it turns green and wondering if i leave it on green for some time maybe would "balance" something, but i heard overcharging is dangerous that is why i disconnecting charger as soon i notice green.

Hi again.. about to leave on charge the battery... yes and no at the same time, if you have good brand BMS or quality one so yes live it on charger without any hesitation... now if your bms is from low cost no name bms i will not recommend to leave it in charge at night..

Brakes is totally trash... i have change them with Shimano..

@@EVCustoms do you have a link to the ones you got? also maybe a video to this or a similar bike that shows us how to install them as well. thanks, and AWESOME video!

Hi... i don't remember this setting, but it must bee much more from 15... i will try to find same motor and find out..

If I remember correctly the magnet setting should be 12. Let us know if that works.

Hi... so you need compatible screen?

Você conseguiu resolver o problema ???

Yes you can, but at 60+lbs these bikes are very much a workout to pedal unpowered.

😄😅 Yes now i fixt it back ..

Hi Marco.. same brand ENGWE? because there exist many companies with exactly same frames..

Yes i bought it on engwe official site...next summer i'll buy the 16 ah battery cus this 13 ah is not good...i reload it each 20 km

@@marcoraffaele2117 Hmmm.. maybe you need balance in your batteries

That's normal for me when the bike is fully loaded. I get 23 miles on my 13ah battery, that's with mostly level 5 pedal assist or just plain old throttle use on the long stretches for a mini rest. I'm an incredibly lazy rider, these bikes weigh a ton. There's me (105kg), bike is nearly 40kg, spare 16ah battery, spare puncture kit, spare pump, tools for wheel & tyre removal, rain poncho, tyres have 250ml's of Weldtite puncture cream each it all adds up, they're like tanks and we love them for it. lol BTW, my battery indicator still reads 100% when nearly empty so an iffy controller but I don't care, just go by miles. Finally, the 16ah battery is only a minor improvement on distance, hence why I use the 13ah first, the 16ah will always get me home, these beasts are no joke under pedal power!!

😆😀

😳😳 Are you sure? Same model? same battery?

@@EVCustoms Yes, it was on sale for 3 days. It's up to $900 now, and even that price is only good for 3 days.

You are so lucky.. 👍

€859,99 Cdiscount France. Waiting for delivery next week .

Oi... qual a sua impressão???

Oh jees. So you bought literally the same model ?

@@alekskroskin6101 I doubt they’ve changed the alloy the frame is made from. So I’d have to say yes, it’s the same.

Omg 😲how did that happened? Soft metal? What does Engwe support say about that?

@@Peter_Sweden When you fold the bike, all the front end weight is on the area behind the hinge, yeh, when it snapped you could see the alloy the frame is made from is pretty cheap soft metal.

Get it welded! Cheap to have done!

Hi.. you must check your battery..

Thank you my friend, about controller you can connect any 48V controller with limit max at 31Amps, for example from Votol controllers the EM30S is perfect, but there you need more space..

Thanks! Do you know how much increase that will have?

Because Votol controllers have flux weakening you can prohram it to get more RPM, but there you will drain much more amperage..