I Don't SUCK at Airbrushing Anymore Here's Why!
Рет қаралды 42,086
3 жыл бұрынRecently it was time for Jay to upgrade his airbrush set up! It can be a wonderful tool but you need to make sure you keep up with airbrush maintenance and it helps to have different ones for different purposes! Jay J. Abrahams explores that and more! We have new videos every Monday, Wednesday and Friday! We're streaming Monday-Saturday starting at 9PM CST!! JOIN USSSS! Thanks for watching!
We have a Patreon! Support us here and get more content!:
/ eonsofbattle
Materials List: (Using the Amazon links helps support the show!)
~Badger Minitaire Paint Set: amzn.to/35Wv1Oa
EonsOfBattle Facebook Page:
/ eobfans
EonsOfBattle Instagram:
/ eonsofbattle
EonsOfBattle Reddit:
/ eonsofbattle
Twitter:
/ eonsofbattle
#warhammer40k #howto #gamesworkshop
@raphaelbizet7554 3 жыл бұрын
The "sharing my Journey" followed by "Don't stop believing" made my day x)
@unagisauce 3 жыл бұрын
Make sure you’re cutting off the paint flow before you’re stopping the airflow. It’ll take some time to get the muscle memory down for it but it should help you immensely with that tip dry issue you’re having. Essentially, when you let go of the trigger entirely, you’re letting paint stop at the tip. Cutting off the supply of the paint before the air means you never have a time where paint is sitting on the needle for prolonged periods. This is one of the main benefits of having a dual-action trigger. Hope this helps!
@ryansargent661 3 жыл бұрын
Your silly putty tip has saved me so much time. I have been looking at getting an airbrush for under and base coats, and to start practicing stuff like OSL. Thanks for the time you put into these videos, it is appreciated.
@YoshisPainting 3 жыл бұрын
Do yourself a solid mate, get some makeup wedges..when you get tip dry, poke the AB into the makeup wedge, done.
@RisingApe 3 жыл бұрын
No idea how I have not found this channel before.. great stuff! Also buy a tall trigger for your patriot.... AMAZING!
@13Robzilla 3 жыл бұрын
Having a wet sponge on hand for tip dry makes it no longer an issue. (Learned that from people who airbrush for a living doing t-shirts, hats, helmets, etc.)
@power_SERG 3 жыл бұрын
Thank you for this, I do own an airbrush but it's the really cheap stuff ($20 airbrush). Luckily I only use AB for the same reasons you described previously (prime, base, and varnish), but watching this and the way you fixed your gun really takes away a ton of the fear I had in investing into a better AB. As always, top tier quality video!
@Vanye111 3 жыл бұрын
The Minitaire paint line itself is fantastic.
@deviantspark2570 3 жыл бұрын
Can't wait for your channel to blow up, your content is always solid and helpful.
@BigAndTall666 3 жыл бұрын
The white seals are made from teflon as introduced by Badger "back in the day", teflon is not elastic so can be worn flat over time but however is chemical resistent to most chemicals. The Badger #105 is a wise choice but note that Badger recommend a 0,5 mm. nozzle for spraying primers like Stynylrez or Mig "One Shot" (same stuff, rebranded). 😉☺️
@harrywagstaff6331 3 жыл бұрын
I have an airbrush which I haven't really been able to use since I don't have space for it but I always found it great for priming and basecoating. I ran alclad laquer primer and it always gave a super smooth, super thin coat that you can't really replicate with a rattlecan.
@OnboardG1 3 жыл бұрын
I have an HnS Ultra I used a lot like you did and burned out because of the learning curve. My partner bought me an evo for Christmas last year and having two airbrushes to share the load definitely helps.
@johnhanley5546 3 жыл бұрын
Very enjoyable - I came away with ' Airbrushes are quick and their graduated colours are great - but you need a brush (or two) too''
@sirdrakey 3 жыл бұрын
👏😮 I have the midrange iwata eclipse the feed is a under carriage but they make a cup that I love to use.
@markgnepper5636 3 жыл бұрын
Great stuff friend 👏 👍
@redakumaproduction Жыл бұрын
Freindly tip.. use masking fluid instead of putty..this was THE game changer for me !! So fast and efficient !!
@NargSmart 3 жыл бұрын
Thanks, this encouraged me to get back at it
@lifestylemagick 4 ай бұрын
I am happy to see someone going for a two brush solution. For my miniatures I have a Workhorse (like you) with a .3 nozzle. It shoots the dirty stuff. And then a detail brush, here however I go for something much lighter than the H&S, I like to use A cup brushes. My go to is an efbe A or an the olympos micron.
@seasonvi6966 2 жыл бұрын
Your armor effect looks amazing! I plan to use it on my Thousand sons :)
@StaindHand 2 жыл бұрын
You’re funny, H & S is always worth it
@babissarris5003 3 жыл бұрын
Best Thumbnail ever! I love John Wick 2!Back on 2017 I went to see Logan at the cinema and when I came across the poster of John Wick 2 I instantly conviced (begged🤣) my friends to go and see that movie instead! Wish you the best guys! Happy new year! Thank you for your amazing tips & videos!
@TopHatMcFenbury 3 жыл бұрын
Both great movies, and I wouldn't have necessarily been disappointed by being swayed to see ol' Wick, but Logan hits different.
@primozimo3041 2 жыл бұрын
14:50 that was awesome lol
@ConstableCuddy 3 жыл бұрын
Always interesting how much regional pricing affects even stuff like airbrushes. Here in germany (where H&S are produced) the Infinity is around $290 and the Badger Patriot around $180, both after tax.
@raphaellemoreau6872 3 жыл бұрын
I was using teflon on my 105 and it wasn't that good. Since I've upgraded to bee wax. It's so great to sceal the thread.
@IMChrisThom 3 жыл бұрын
Do you have a regular care and feeding for your airbrush vid?
@antoinerossignol9355 3 жыл бұрын
One game changer for me was Vallejo flow improver!!!
@CobaltMilsim 3 жыл бұрын
That's the Calistarius model isn't it? Aka Mephiston before he changed after beating the black rage? I think anyways
@cashs2599 3 жыл бұрын
Woah! Great model! Will you make a airbrush station?
@gkeaton9755 3 жыл бұрын
I use badgers patriot 105 and the badger sotar 20/20 (slim) I so want the h&s brush, though!
@neilbrown2451 3 жыл бұрын
I find I get major dry tip on the infinity and find cleaning the .15mm tip a complete pain in the arse. I found using a mix of airbrush thinner and medium helped instead of straight airbrush thinner.
@My_wife_left_me 3 жыл бұрын
I picked up the cault of paint Infinity and it is an upgrade on the og infinity
@mac40k92 3 жыл бұрын
Many years ago I got one of those all in one Masters kits from Amazon and hated it. I had been hobby painting for over 20 years by that point, but the cheap airbrush, even with a full line of Vallejo Model Air paints clogged all the time and seemed to be more trouble to use than it was worth. I got out of the hobby entirely shortly thereafter. Since getting back in, I've been watching and reading airbrush reviews and now I have my eye on a Harder & Steenbeck Ultra. It's gets pretty good reviews and seems to be a good choice for a starter brush at a reasonable price.
@pipedreamer9781 3 жыл бұрын
I've heard that candies should always go on last because they bleed through your colors. Something I just took for granted without question. Your rich candy base layers however, appeared to act like any other opaque paint. This was really eye opening. I'll have to experiment myself, but you've gotten my gears are turning with new possibilities!
@EonsOfBattle 3 жыл бұрын
yes! the ghost tint paints seem to be colors with a lot of gloss medium to thin them without losing the body of the paint.
@Dagglestone 3 жыл бұрын
So I’ve had a lot of issues with my badger ghost tints tip drying and drying inside of the cup like nothing I’ve ever seen before, and I’ve never been so frustrated in my life. I’ve used water and airbrush thinner but it never seems to help. Should I be adding lots of flow improver or something?
@tmarcb1296 Жыл бұрын
Is there a kit like that for the patriot air brush? Mine could use some TLC
@WolfpriestCjarl 3 жыл бұрын
Curious as to what air compressor you use...?
@calebtaschoff3807 2 жыл бұрын
I always have trouble doing highlights with my airbrush. I want to try doing it with the airbrush but I usually undershot or overshoot it. Idk. Painting is such a pain sometimes.
@benmontgomery5102 3 жыл бұрын
Holy shit what a thumbnail
@robotic2000k 3 жыл бұрын
@ 5:51 on the airbrush cup: FACE! :D
@shadowblack1987 Жыл бұрын
Iwata Eclipse Hp-cs. $175, runs a decade before swapping parts, as good as the $300+ brushes.
@codytucker1410 3 жыл бұрын
Awesome videos. Did you talk about types of glues in one of your videos? I could swear that i saw one before, and now i can’t find it anywhere.
@EonsOfBattle 3 жыл бұрын
I don't remember if I talk about glues in a video. The Glue I use is Tamiya Extra Thin Cement Glue (plastic glue), any superglue, and 5 minute epoxy for metal models.
@anthonyattwood2581 3 жыл бұрын
I'm about to move house and will have a dedicated hobby space so I'm finally planning on splashing out on an airbrush. I think this may be the most informative airbrush video I've seen as it really shows the reality of what airbrush painting is like. Out of curiosity, do you have two compressors or do you switch the air supply from one brush to another?
@EonsOfBattle 3 жыл бұрын
only 1 compressor, but I bought 2 quick disconnects one for each brush so I can easily switch the air hose between the two.
@rowshak 2 жыл бұрын
Eons: But first, lets go to a peepee break! Me: Ya good call, I'll go grab a coffee at the same time. Eons: A Patreon Plug! Me: Ohhh...mistakes were made.
@Spiraticus 3 жыл бұрын
Great video! Any chance we get your take on an “Airbrushing for beginners, start here” video? Looking to start airbrushing myself, but even with all the info out there, I’m still uncertain about things.
@karmaq8462 3 жыл бұрын
Watch angel Heraldez , I learned alot from that.
@printthefuture 3 жыл бұрын
love from india
@michaelbeach4652 3 жыл бұрын
Thanks for sharing this info. One question though. Did you thin the inks. If so how much. Thanks again stay safe
@EonsOfBattle 3 жыл бұрын
no thinning on the inks they run just fine as is.
@JasonM69 2 жыл бұрын
I HAD A BABY BROTHER, AND HE WAS 7:45
@archfrank 3 жыл бұрын
Hi Jay, very informative vid! Speaking of setup for airbrushing, what's your airbrushing room like? I read everywhere that you need super ventilation otherwise the overspray will paint your walls or something. I think people make it sound way worse than it actually is, but what's your opinion on this? I've been waiting to move to a house in the summer before getting started for this reason :(
@EonsOfBattle 3 жыл бұрын
you don't have to worry about the walls but I would keep finished models or your computer a few feet away from the spraying, the spray lingers a little. I haven't found airbrushing to be overly messy but if you are really worried there are small spray booth products out there.
@OnboardG1 3 жыл бұрын
@@EonsOfBattle yep, don’t do what I did and leave a black mini sitting around while spraying Vallejo copper...
@karmaq8462 3 жыл бұрын
You could of just used your patriot for the fine details too , I found out that rocking the trigger will get your paint where you want it .
@c0ldsh0w3r 3 жыл бұрын
Hardcore Goobertown Hobbies vibes here.
@MiniatureMasterClass 3 жыл бұрын
How does that Infinity compare to an Iwata (which most pro airbrushers use)?
@EonsOfBattle 3 жыл бұрын
Hmmm, my only experience with Iwata is the NEO for Iwata which is kinda its own thing but if it's of comparable quality for FAR less money I'm sure it's the better option.
@MrStatistx 3 жыл бұрын
What red did you use there? Cause it looks like a mighty fine red I have to say
@EonsOfBattle 3 жыл бұрын
it was red ink, Liquitex Pyrrole Red
@djangofett4879 3 жыл бұрын
14:50 😂
@heromedley 3 жыл бұрын
its pretty expensive tho
@ger5956 3 жыл бұрын
Like and comment to appease the almighty algorithm
@philbobaggins3969 3 жыл бұрын
Anyone know if the 25 dollar master airbrush is ok to use ?...I know u get what u pay for ..but is there much difference?
@Matt-tb5un 3 жыл бұрын
That's the one I started with and it's not a bad purchase at all for learning. Mine came with a compressor and to be honest I'd recommend that whole kit for the compressor. That master airbrush will always be a work horse for priming and base coating. If you want to "upgrade" it, look up how to smooth out those rough needles that come with the master.
@recreant359 3 жыл бұрын
I thought the Iwata was the end all be all off air brushes
@iamalpharius3959 3 жыл бұрын
75 bucks is my kinda airbrush.
@Gennys 3 жыл бұрын
Uhhh... what is a space brain librarian?
@sir_tacothe1st 2 жыл бұрын
*Press x to doubt*
@MrStatistx 3 жыл бұрын
Oh boy, don't just poke yourself to test the needle. I once poked myself by accident and it bent the needletip right away. Those things are sensitive
@EonsOfBattle 3 жыл бұрын
luckily my baby smooth skin is no danger to a stainless steel needle.
@ScaleModelIncLIVE Жыл бұрын
The reason you’re getting problems with the infinity is that you’re using water based paints. Try it with my color paints and my color levelling thinner and tell me what you think then ☺️
Tranding Viral
Рет қаралды 15 МЛН