EP-24 WE ARE BUILDING A NEW BOAT! NEW MARINE ELECTRONICS AND WIRING

No video

EP-24 WE ARE BUILDING A NEW BOAT! NEW MARINE ELECTRONICS AND WIRING

Рет қаралды 13,257

Күн бұрын

Boat Build Series Episode #24 2900 Buskens Bay. We bought Marine electronics for our NEW custom-built charter boat! Now it's time to install them! Follow along as we show you the details of wiring a boat.
Thanks for watching!
Be sure to SUBSCRIBE, LIKE COMMENT, and SHARE!
________________________________________________________________________
Amazon Affiliate Links:
Garmin amzn.to/3qY3GsN
Garmin Transducer amzn.to/3ZalNIw
Garmin Grid Remote amzn.to/3Pv3cn8
Fusion Stereo amzn.to/3sOWxeP
Speakers amzn.to/3LfFB7C
Heat Gun amzn.to/3Z8J39U
Core Solder amzn.to/3ECZEcd
Strikers amzn.to/44JFQhZ
Torch amzn.to/3EufPbU
Pencil Torch Head amzn.to/3Exgutd
Knife amzn.to/3Exgutd
Blue Tape amzn.to/3Lh8sZ0
Grease amzn.to/3Libj45
Cordless Drill amzn.to/3r8xFOM
Drill Bit Set amzn.to/3PuY3vn
Oscillating Multi-Tool amzn.to/3Pbg00T
Oscillating Blade amzn.to/3PdAWEe
Grinder amzn.to/44JGNXB
Grinder Burr Bits amzn.to/44JGNXB
File amzn.to/45Yk63H
Work Light amzn.to/3J1m3lB
_______________________________________________________________________
boat electronics, garmin, gps, how to build a boat, how to, boat drains, boat repair, gel coat, fiberglass, fiberglass boat building, stringers in the boat, fiberglass boat repair, gel coat repair, best boat building videos, Coosa, , boat deck, boat floor, floor replacement, hybrid bay, installing Coosa deck, water tank, fuel tank, fishing charters, gulf shores

Пікірлер: 50

@ronf.109 11 ай бұрын

So many tricks and you are so meticulous in everything you do, that boat will be amazing.

@FishBumpTV 11 ай бұрын

Thanks so much 😊 We try to do it right! Appreciate you watching!

@markrowe2227 11 ай бұрын

The double shrink wrap turned out great. Maybe in a future video you could explain the marine electronics in greater detail on the water. Thanks Captain Joe, another great video!

@FishBumpTV 11 ай бұрын

Thank you Sir! More Electronics and water testing coming soon. Thanks for the suggestion. I appreciate you watching and commenting!

@sallucido852 7 ай бұрын

If you solder the fittings by filling the hole,then put wire in it will finish it very nicely

@FishBumpTV 7 ай бұрын

Thanks for your thoughts!

@jjfishing1208 11 ай бұрын

The amount of detail and craftsmanship is off the chart. Awesome job. Definitely doing it right the first time. Great job explaining steps. Keep it up

@FishBumpTV 11 ай бұрын

Thank you so much! Glad you are enjoying the content. If you have any suggestions for content, I would appreciate the feedback. Thanks again for watching and commenting!

@brandywineangler6748 11 ай бұрын

Love the attention to detail and proper methodology!

@FishBumpTV 11 ай бұрын

Thank you! Appreciate you watching!

@mcmxillc6138 Ай бұрын

Thanks for another great video Captain Joe! I hope you have stock in Fein since I just ordered one of their top-of-the-line multi-tools after your recommendation in this video. 😂 I have a DeWalt jigswaw and Rotozip cutting tool, but I can see how the Fein will be better for cutting out holes for displays and such in the console. Thanks also for mentioning the GRID 20 from Garmin. I bought one a month or so ago after watching this video the first time around. I discovered that one GRID 20 can control multiple displays. I don't have room for two GRID 20s on my console so will switch back and forth between the GPSMAP 8610xsv and GPSMAP 943xsv displays as needed. Perhaps I can recommend a tool to you. I recently upgraded from a single battery to dual batteries on my Robalo so had to run a 2AWG cable from the rear to the console, and did a lot of other wiring with more to do. I bought a TEMCo hydraulic crimping kit and it does such a great job of attaching terminals to cables and wires. Just a thought. Keep up the great work! 😊

@shananagen09 11 ай бұрын

Been using marine shrink for years on connections and NEVER thought to double up... such a good idea.

@FishBumpTV 11 ай бұрын

Thanks! Glad You found it helpful! I appreciate You watching and commenting!

@RacksnBass 11 ай бұрын

Just binged watched your videos of this boat starting from how to gelcoat and y’all installing the tub rails etc, now I’ve made it to this video and I’m watching it now and it’s super cool to see the passion you and marky mark have for this boat and this work. I’m 22 years old and have just started my boat building/ rebuilding journey now on my 4th boat, it’s a Shallow Sport with a aluminum raised console with a Yamaha 150 TRP. Fixing to pull all the wiring out of the console and pull the aluminum off to powder coat and then regelcoat the whole deck so I’m excited to use your tips and tricks and become better at this! Keep up the videos!

@FishBumpTV 11 ай бұрын

Thank you so much! Sounds like a really cool project boat, I have always liked Shallow Sports and Yamahas are my motor of choice for sure! We hope to have more boat and fishing videos coming soon. If You have any video suggestions, I would appreciate the feedback. Thanks again for the comment!

@gsparrow321 10 ай бұрын

Now that is a well used wire wheel!!!!!

@FishBumpTV 10 ай бұрын

Haha,Yep! We have got some miles on that one! Thanks for watching and commenting.

@gsparrow321 10 ай бұрын

@@FishBumpTV I think the whole family's gotten their money's worth out of that one!

@kevinjoyce4497 3 ай бұрын

Nice work my friend. ✌️

@FishBumpTV 3 ай бұрын

Thank you very much!

@diyoutdoors6675 6 ай бұрын

What a beautiful boat

@FishBumpTV 6 ай бұрын

Thanks so much!

@QANETS78 10 ай бұрын

hi i am from indonesia wow what a cool spot Greetings from a new friend, keep up the enthusiasm for uploading content, always be successful

@FishBumpTV 10 ай бұрын

Thanks for watching and commenting! I really appreciate it!

@danielsalazar8835 7 ай бұрын

Overall great job excellent craftsmanship Interesting point regarding the manual controls for the garmin units I'm sure you know the Simrad's have both touch screen and manual controls in a combined product I do agree that the Garmin support is better than Simrad Would have been nice to have Yamaha command link Digital gauges/engine monitoring Also newer push button switches

@FishBumpTV 7 ай бұрын

Thanks for the tips! I appreciate you watching and commenting!

@CoryThompson-h3i 9 күн бұрын

😊

@FishBumpTV 8 күн бұрын

Thanks for watching!

@chugaaa 11 ай бұрын

Loving the progress it is incredible that we are already in the punch list for this beauty...so the one million dollar question is, are we doing another boat after this one? Maybe Marks? Good luck guys amazing content.

@FishBumpTV 11 ай бұрын

That is a good question!! Who knows, maybe! Thanks for watching and commenting, it really helps the channel!

@tomogletree1 11 ай бұрын

Good stuff Captain

@FishBumpTV 11 ай бұрын

Thank You so much!

@chrisburr7929 2 ай бұрын

I keep wondering and this may seem a silly question but it’s been bugging me! How do you stop water from tracking down alongside screws/bolts in fixtures? For example you apply sealant around the base of a cleat for example but then what’s to stop water tracking down the actual screw?

@FishBumpTV 2 ай бұрын

I also apply sealant into or over the screw holes, and apply some to the actual threads on the scew itself before running it in. Then just clean up any excess sealant that squeezes out. With bolts I always apply a bead of sealant under the shoulder of the bolt, or the washer on the bolt before running it in, then more sealant around the bolt threads on the other side before installing the washer and nut. You should get squeeze out around the bolt when you tighten it up. Then clean up, or tool the excess sealant that has squeezed out. I have a video on the channel showing this process. I believe it is titled how to seal and waterproof holes in plywood. I hope this helps, and thanks for watching!

@chrisburr7929 2 ай бұрын

@@FishBumpTV thanks for your response! Will go find that video. Loving your channel and these workshop content videos!

@johnbozzelle5191 9 ай бұрын

What's the beam and LOA on it? Deadrise? Looks like it has turned out nice.

@FishBumpTV 9 ай бұрын

The beam is 9,6 midship, tapering to 8,6 at the transom. LOA down the centerline is 29 feet. The boat has a variable deadrise. with a 17.5 degree average at the transom. 160 gallons of fuel capacity and 30 gallons of fresh water. I will have top speed run and boat tour video coming out soon. Thanks for watching!

@jackisboss1 11 ай бұрын

Love watching you videos! Curious if you through bolt all the hose clamps and bus bars, etc. inside your console and you can see the backside of the fasteners on the outside of the console? Or are you somehow concealing those fasteners? Working on a 14’ Livingston and I’ve learned so much from your videos

@FishBumpTV 11 ай бұрын

Thanks so much, Glad you are enjoying the content! That's a good question, We have pieces of 3/4 inch thick Coosa board glassed into the areas in the console where we are running screws in. You could also use 3/4-inch plywood to create a hardpoint for your fasteners. We are also using the bolts that are holding the rod holders on for some of the clamps. We did thru bolt the battery charger to the console side because it is very heavy and quite important. Hope that answers your question. Thanks again for watching, and good luck with your project!

@justinlipsky 10 ай бұрын

Do you have any plans of pulling more hulls from your mold?

@FishBumpTV 10 ай бұрын

Building more hulls is a real possibility, but nothing definite planned at this time. I would also consider selling the molds or partnering with someone to build more. With the response the boat is getting , and its overall performance I do feel like there is a real market for this boat. Thanks for watching and commenting!

@justinlipsky 10 ай бұрын

I would be very interested in a bare hull without any stringers if you decide to pop more out. Would love to come up for a charter trip and see it in person. @@FishBumpTV

@sre2007 11 ай бұрын

Agree that father and grandfather tools are the best! I thought you were from Alabama? Where did you learn to say the "L" in solder like the British? :-)

@FishBumpTV 11 ай бұрын

Yep, Hard to beat those dad and granddad tools for sure! Haha, ya got me on the pronunciation! Got to remember You tube is global, Folks from the UK and Australia watch the channel Too! I appreciate you watching and commenting!

@LukekL123 11 ай бұрын

Hey capt. Have you every tried a hydraulic crimper? Works well for some of the thicker wires if your not using it already. Harbor freight has a good one.

@FishBumpTV 11 ай бұрын

That's on my list of tools I would like to have. Thanks for watching and commenting!