EP26 Installing the HIAB (crane) on the trailer

Рет қаралды 14,496

2 жыл бұрын

In This video, I install the HIAB crane on my car trailer. Very happy with the outcome and how this one came together so easily. This is going to save my back. I have already been thinking of where and how I can use it. Such a time saving and back-saving machine. Let the work begin

Пікірлер: 15

@davidzplace2011 2 жыл бұрын

Lmao, you had me at that fukn barking dog, nothing more annoying than working with at high pitched constant yapping, great job on the power pack/hyab install, great video and Audio quality :)

@TheadventuresofSherylandPaul 2 жыл бұрын

Thanks. My dad asked me if I shot it. Lmao 🤣

@user-sd6us2zn2b 5 ай бұрын

Mate does anything hold the post of the crane down on the base assembly i have one looks the same ,picked up cheap but the slew is seized i can,t find any way to get it off just wondering if there is a bolt or fixing somewhere i can,t find it is stuck solid. at the moment it is upside down with diesel soaking in the joint ,any advise you can give would be a great help ,cheers paul in tassie

@TheadventuresofSherylandPaul 4 ай бұрын

Has an Allen key grub screw

@samrichards8251 2 жыл бұрын

How thick is the plate you made? Would 10mm do the job you guess?

@TheadventuresofSherylandPaul 2 жыл бұрын

Hi Sam I used 12mm plate. The gussets underneath are very close to the holes though.

@samrichards8251 2 жыл бұрын

I have mounted a small fassi micro 10 to trailer. How did you connect wires to battery? Mine just has blue and brown wire coming from the control box

@TheadventuresofSherylandPaul 2 жыл бұрын

Hi Sam, I am not sure without looking at it but, I had to run a large cable to the solenoid that goes to the pump and then a large negative cable to the body of the pump. I would dare say the blue and brown on yours are the control circuit for the solenoid, which I wired to a switch to turn the pump on.

@samrichards8251 2 жыл бұрын

@@TheadventuresofSherylandPaul ok thanks for the reply. I must be missing an important part then. I just have the crane itself and the control box. ( auction purchase) must be missing a hydraulic power pack someone mentioned

@marcogazzi4465 2 жыл бұрын

Does the arm go higher than that mate ?

@TheadventuresofSherylandPaul 2 жыл бұрын

Close to vertical. I think in the video it’s only about 1/3 stroke of the ram

@xxxlimozxxx Жыл бұрын

It is Maxilift ML110 not HIAB :D

@fonhollohan2908 2 жыл бұрын

yeah I can see why that barking would get on your nerves it would get on mine too. yeah your going to need to build an outrigger on it especially lifting heavier loads. Things can go wrong real quickly.

@TheadventuresofSherylandPaul 2 жыл бұрын

There is an additional circuit on the valve body for it. Just need a ram. cheers

@fonhollohan2908 2 жыл бұрын

@@TheadventuresofSherylandPaul well that good, definitely will be cheaper for yah with not too much trouble.