Ep8 SPRINTER VAN BUILD FLARESPACE trim ring and upholstery
Рет қаралды 10,953
2 жыл бұрынCOST EFFECTIVE OR NOT?
All you need to know about the internal part of the flarespace
URBANARKOVERLAND INSTAGRAM
urbanarkove...
EMAIL
ARKCUSTOMUK@GMAIL.COM
ROOF PANELS EVOMOTION
www.evomotiondesign.co.uk/pro...
SOUND DEADENING
www.silentcoat.co.uk/collecti...
16MM THERMOLINER
rhodesvans.co.uk/dodo-thermo-...
WOOL INSULATION ROLLS
rhodesvans.co.uk/rhodes-vans-...
UNDERLAY CLOSED CELL FOAM
www.profabrics.co.uk/products...
FABRIC
www.ebay.co.uk/itm/2521978626...
SPAY GLUE CANISTER
www.ebay.co.uk/itm/2246863763...
ADHESIVE GUN
www.ebay.co.uk/itm/1337618463...
DOWNLIGHTS
www.ebay.co.uk/itm/2844932050...
#VANLIFE
#SPRINTERBUILD
#FLARESPACE
@stephenbulmer7148 2 жыл бұрын
nice work on the trim rings/flares. like the finishes you've decided to use for this build.
@urbanarkoverland 2 жыл бұрын
Thanks buddy. Should be showing off internal colours today on insta 👍🏻
@CampervanHabitude 2 жыл бұрын
Ahh mate, great job. Just subscribed as it's great to see a plumbers mind at work. It was a past vocation for me and that practical mindset never leaves you. That said, I need all the inspiration I can get to self build our imminent Crafter once the T6 has sold. Look forward to watching your vlogs and hopefully give you a shout if I see you about. Take it easy! Mal, Ruth (and Raffy)
@urbanarkoverland 2 жыл бұрын
Hello there. Welcome buddy. I will give advice if I feel I can help. No problem 👍🏻👍🏻👍🏻
@jonnywilson6932 2 жыл бұрын
👍🏼 🇬🇧 🚐 🇦🇪 ✂️ Proper trimmed ring and good use of the flap! You have almost inspired me to re-trim our footstool in the lounge.
@urbanarkoverland 2 жыл бұрын
Ha ha ha. 💪🏻
@willstrevens2347 2 жыл бұрын
Great workmanship buddy well done
@urbanarkoverland 2 жыл бұрын
Thanks matey 👍🏻
@Ash-ck4iz Жыл бұрын
Tip for marking holes through the material. Use a soldering iron. That'll also clear any material around the hole to stop the fixing from snagging. Informative videos by the way 🤙
@urbanarkoverland Жыл бұрын
Nice 👍🏻
@CalumNicholson 2 жыл бұрын
Great video, some fantastic tips and info 👍🏻
@urbanarkoverland 2 жыл бұрын
Thanks pal 👍🏻👍🏻
@northeastcarpfishing 2 жыл бұрын
Looking good learned a few things of that vid
@urbanarkoverland 2 жыл бұрын
Glad to hear it 👍🏻😂
@frankiez7414 2 жыл бұрын
yep, I concur, it looks pretty pucker mate. You have an eye for detail that is rare in the diy van conversion world. I've seen some hash jobs. Yours is very professional Aidan. I opted to sleep the other way and have the end of the bed telescopic, so retracting about 8 inches during the day and the kitchen worktop running partly under the bed. It saves a lot on Flarespace work and money. Would be interested in what kit you have in mind for the rest of the project.
@urbanarkoverland 2 жыл бұрын
That is a good idea. I wanted least moving parts as possible on this one. So many amazing variations possible. It’s choosing the best for YOU 👍🏻
@campervansen-le-frith8517 2 жыл бұрын
Looking good!
@urbanarkoverland 2 жыл бұрын
Thanks pal. Please subscribe….. again
@paulkelly1494 Жыл бұрын
You make it look.easy
@urbanarkoverland Жыл бұрын
It is when you know how 👍🏻
@Bugoutvehiclesuk 2 жыл бұрын
That’s a very nice hoodie.
@urbanarkoverland 2 жыл бұрын
Thanks. A bit dirty now. Need a new one 😉
@henrystokes7566 2 жыл бұрын
Looks really nice , I like the Velcro idea , I am at a similar stage but few weeks behind you so great to watch . Can I ask what main wall panel cladding material you used is ? looks nice and light , thinking I might ditch my 9mm marine ply plan . I am thinking you must secure overhead lockers to the van with rivnuts and not rely on the cladding to fix to. Keep up the good work 👍
@urbanarkoverland 2 жыл бұрын
Hi. Yes exact that. I use thin hardboard. It has no structural element. By the time I foam and fabric it you could never hurt it. But like you said. Find support in the van it self. I went crazy with ply on my other van and it ended up being so overweight.
@Aprilia_tuono_v4_rider Жыл бұрын
Recently came across your videos. Very informative and inspirational. I've recently purchased a new shape crafter to convert and am looking at starting off with the evo side pods. Do you think the flarespace trims would fit a crafter? If so how did you import them in? Many thanks
@urbanarkoverland Жыл бұрын
I don’t imagine they fit crafter as they are so precise. Not in fit. But in size. By the time I put tweed around the edge it was tight 👍🏻
@chexvanz582 2 жыл бұрын
What adhesive did you use? I used 3m hi-strength 90 spray adhesive to flip the sides of the foam over the ring and it’s been pretty painful.. keep flopping back.
@urbanarkoverland 2 жыл бұрын
Any spray adhesive. They are all pretty good. You spray both surfaces. Wait. And then press yeah?
@jameskirkpatrick7992 Жыл бұрын
Lovely job mate! What are the sizes of your wheels and tyres please?
@urbanarkoverland Жыл бұрын
I actually can’t remember. The van has gone. It may be on another video 👍🏻
@jameskirkpatrick7992 Жыл бұрын
@@urbanarkoverland Haha fair enough! ill have to keep watching to find out :)
@urbanarkoverland Жыл бұрын
@@jameskirkpatrick7992 ideal 👍🏻😂
@benstobbs82 2 жыл бұрын
Great job, where are the trim panels from?
@urbanarkoverland 2 жыл бұрын
From flarespace! States
@garethpearson174 2 жыл бұрын
Are you putting a video on about your new light 💡
@urbanarkoverland 2 жыл бұрын
New light???
@garethpearson174 2 жыл бұрын
@@urbanarkoverland new spot lights on your bonnet
@urbanarkoverland 2 жыл бұрын
@@garethpearson174 gotcha. May do a short. That’s like a 60 second job 👍🏻
@garethpearson174 2 жыл бұрын
What size wheels have you put on and looking good 👍
@urbanarkoverland 2 жыл бұрын
These are 17’s 👍🏻
@Murray_23 11 ай бұрын
What do you think about making trim rings out of ally? I’m a metal worker so would be easy for me to knock them up
@urbanarkoverland 11 ай бұрын
If it’s easy mate yeh sure.
@Murray_23 11 ай бұрын
@@urbanarkoverland didn’t mean to sound cocky haha, meant easier then out of wood and would save me money buying the fibreglass ones. Loving this build! Even if I am late to it
@urbanarkoverland 11 ай бұрын
@@Murray_23 ha ha. Not cocky mate. We will see when you try to shape it ha ha
@chexvanz582 2 жыл бұрын
Also what mm is your foam?
@urbanarkoverland 2 жыл бұрын
6mm. But 4mm is ok. Just not as plush looking I guess. 👍🏻👍🏻
@robinhillaert7786 2 жыл бұрын
How did you mark the area to cut with a pencil?
@urbanarkoverland 2 жыл бұрын
I didn’t. Thanks fixed the ring the routed it. Don’t need to mark it 👍🏻
@urbanarkoverland 2 жыл бұрын
You could in fact fix the wall panel to the ring. Lift it out. And then run a pencil around the inside. I like to use a router. Better than a jigsaw 👍🏻
@jonathanchireix6696 2 жыл бұрын
I meant before you routed. When you put the trim ring up to the flare and used a pencil to mark where the trim ring over hung and jigsawed where you were going to cut the excess.. wondering how you traced which parts to cut
@urbanarkoverland 2 жыл бұрын
@@jonathanchireix6696 place a pencil on the flare. And run it along the trim ring. Where marks usually means ut needs to come off
Scott Adamson
Рет қаралды 41 М.
Our Thriving Life
Рет қаралды 23 М.
Arun Baliyan7
Рет қаралды 7 МЛН