EPS on a 2008 Rhino and works on Rhinos 04 and up

Рет қаралды 59,900

9 жыл бұрын

Installing power steering on my 08 Yamaha Rhino. This video should help you with what to do and how to do it. The ride and the feel you get from the steering is a plus and very different. Subscribe: / @lonniejohnson1

Пікірлер: 46

@ericwag1711 6 жыл бұрын

Thanks for posting this video. I was able to install mine in less than 2 hrs. Wouldn’t have gone so smoothly without your instruction.

@LonnieJohnson1 6 жыл бұрын

Cool!

@appraiserdmitchell 7 жыл бұрын

Thank you Lonnie J for your great video on this subject. All went well after watching you accurate and detailed Vid. Thank you very much.

@LonnieJohnson1 7 жыл бұрын

Thanks for comment and I'm glad I could help.

@edbreitung2426 6 жыл бұрын

Thank you for the video, the instructions in my kit were poor. Because of your video I was able to complete the install in 3 hrs, Thank you.

@LonnieJohnson1 6 жыл бұрын

Your welcome, glad I could help.

@preston7795 4 жыл бұрын

Thank you for your sacrifice! 4 years after you uploaded this video and still saved my ass

@LonnieJohnson1 4 жыл бұрын

Cool!!!

@michaelt308 4 жыл бұрын

Great job! Thank you for taking the time to do this!!

@LonnieJohnson1 4 жыл бұрын

Thanks! and your welcome!!

@yz2508 7 жыл бұрын

Thanks bro, I was about to call superatv and let them know what i think of their instruction packet. I saw that yours had a lot better color, mine were damn near impossible to understand. I owe you a beer

@LonnieJohnson1 7 жыл бұрын

Cool! did everything work out

@stephenlemos6287 6 жыл бұрын

Thanks for this great video it helped me tremendously putting my power steering on my rhino, the instructions were for sh#*. If it weren't for you it would not have been done. Thanks to your instructions I got it completed. and OMG what a difference in the steering Love it

@LonnieJohnson1 6 жыл бұрын

Yes, big difference, glad I could help

@firstlast7099 3 жыл бұрын

Thanks for the video, mine barely rubs the brake switch. Took me 2 hours. Don’t do what I did, pay attention to how the two steel plates interact with each other, and don’t tighten any mounting bolts until it’s all together so you can keep it from binding and miss your brake switch. Tighten the steering wheel bolts first, if you create a bind, the u-joints are the weakest link and will come apart, I found out the hard way.

@LonnieJohnson1 3 жыл бұрын

You're welcome. Yes, what he said.

@BreezyFknDoesIt 4 жыл бұрын

EXCELLENT video

@LonnieJohnson1 4 жыл бұрын

Thanks!

@imanoleonardo6902 4 жыл бұрын

Very clear video, thx

@LonnieJohnson1 4 жыл бұрын

Glad I could help

@oneeyedrone4293 2 жыл бұрын

Never needed EPS lol, love the simplicity of my manual steering :) Now in a car with ps having a failed pump or motor, thats another story. The stock steering on the rhino works great if youre not lifted or driving over mountains :)

@LonnieJohnson1 2 жыл бұрын

Your right about a car, however, it's really nice when driving over mountains and when riding over rocks it make's it so much easier to turn and control without having to fight the steering wheel and breaking my wrist or arm in the process. Also works good while driving through deep water.

@ziptieaffair9806 8 жыл бұрын

How has the EZ-steer unit held up? I'm interested in buying one, but don't want to spend $600 on something that doesnt last.

@LonnieJohnson1 8 жыл бұрын

+ZipTieAffair It has not been a year yet but so far it has been a great asset! I haven't had any issues with it at all. I have a lot of tight spots where I have to park and backing up is so easy know.

@ziptieaffair9806 8 жыл бұрын

+LonnieJohnson1 Thanks!

@mrgood56 6 жыл бұрын

It´s so nice to hear an american say millimeter, it is like birdsong in my ear :D

@LonnieJohnson1 6 жыл бұрын

Cool!

@ben5063 5 жыл бұрын

Thank you for your video i order this kit.. Did not get a book no instructions No papers no nothing lol. Mine does not have a brake light switch their Mine has a cable with the a Spring attached to the brake pedal.. I'm thinking it' Activates The switch When you put foot on brake let's you go Into reverse.. My kit came with a inch Bracket It let me move that cable down about an inch away from that steering knuckle.. Mine is a 2017 Cub cadet the same thing as a Massimo..

@LonnieJohnson1 5 жыл бұрын

Glad to help. Did everything work out OK?

@ben5063 5 жыл бұрын

Yes almost drives as good As a Cadillac lol..

@LonnieJohnson1 5 жыл бұрын

Cool!

@mikemartinsells 5 жыл бұрын

how much does one of these kits cost?

@LonnieJohnson1 5 жыл бұрын

I think I paid about 500 dollars.

@oby-1607 4 жыл бұрын

Its 2020 now. How has this held up. We use a lot of trails with long rocky drop-offs so need something reliable.

@LonnieJohnson1 4 жыл бұрын

Still holding up and working great. I have no complaints and no regrets.

@oby-1607 4 жыл бұрын

@@LonnieJohnson1 Oh nice, I just picked up a used 660 Rhino and was thinking of power steering so the family could use it too. Is it still available and is there a link?

@nickoman2468 4 жыл бұрын

@@oby-1607 Hi, did you find a PS setup? I have an 08 and am looking too.

@oby-1607 4 жыл бұрын

@@nickoman2468 No, Covid 19 has presented its challenges for accessing parts. But it will happen.

@millionlee6211 5 жыл бұрын

The more air you add to the front tires, the easier they will steer

@LonnieJohnson1 5 жыл бұрын

True, but you sacrifice control and wear out the center of the front tires and you get no traction. Also the front end will bounce you into a tree or damage the front shocks and bushings. Depends on how you drive.

@charlenewilson3354 7 жыл бұрын

ill just get a new one with power steering

@LonnieJohnson1 7 жыл бұрын

I almost did that.

@firstlast7099 3 жыл бұрын

$650 is pretty steep

@LonnieJohnson1 3 жыл бұрын

Wow!!! I only paid about $517. After I installed it, it was nice to steer with one finger. But yea, it's getting pricey.

@ken3700 6 ай бұрын

Nobody cares what size of socket you’re using…. If people are that inept the shouldn’t be working on anything!

@LonnieJohnson1 5 ай бұрын

I just try to keep them from looking and guessing which socket or wrench to use. I try to give all the information and help I can because people that DIY might not jump into these projects a lot. Thanks for the comment.